Related Products
Wilmore DC-DC Converter 24 Vdc In, 12 Vdc Out, 15 Amp Continuous
Wilmore DC-DC Converter 24 Vdc In, 12 Vdc Out, 15 Amp Continuous 19" Rack Mount
1650-24-12-15 DC-DC converter, input voltage: 24 VDC nominal, negative ground (20 – 30 VDC), output voltage: 12 VDC nominal, and negative ground maximum output current: 15 A, continuous. Designed to power 12-volt or 24-volt equipment from a variety of vehicular battery systems, these dc-to-dc converters feature high conversion efficiency, low standby power consumption, good noise suppression, and electrical and mechanical ruggedness.
Characteristics
Input/Output
Input voltage: 24 Vdc nominal, negative ground (20 to 30 Vdc)
Output voltage: 12 Vdc nominal, negative ground
Maximum output current: 15 amperes, continuous
Output-Voltage Variation
Line: Output voltage is directly proportional to input voltage
Load: Approximately ±0.3 volts for the load range
0.5 to 15 amperes
Output-Voltage Ripple
Typically less than 10 millivolts rms, 50 millivolts peak-to-peak
Protection
Protected by an input power fuse against short circuits and accidental reversal of input polarity
Ambient Operating Temperature Range -30˚C to +60˚C
Mechanical
Size: 1.9”h x 4.5”w x 5.5”d excluding mounting
flanges and fuse holder. Add 0.7” to height for fuse
holder and terminal block.
Weight: 1.0 lbs.
Mounting: Mounting flanges on base will accept #10 screws. The hole pattern is 4.0” x 5.0” on center