Related Products
AirFiber 24HD 24 GHz Pt-Pt 2 Gbps Radio
Ubiquiti AirFiber 24HD GHz, 2 Gigabit Wireless Bridge. Requires 2 units for a single link. Warranty provided directly via Ubiquti https://www.ubnt.com/support/rma/
AirFiber 24HD 24GHz Full Duplex Point to Point 2 Gbps Radio
The AirFiber 24HD is a 24GHz Full Duplex Point to Point are designed to be a high-performance backhaul, the airFiber®24HD delivers amazing wireless throughput of up to 2+ Gbps, surpassing conventional wired backhauls. Supports FDD (Frequency Division Duplexing) in full-duplex mode for < 1 ms latency, resulting in increased efficiency for carrier-class network backhauls.
Note that 2 are required for a link.Features
- Operating Frequency: 24.05 – 24.25 GHz
- Maximum Throughput 2 Gbps
- Maximum Range 20+ km
- Packets per Second > 1 Million
- Encryption 128-Bit AES
- Uplink/Downlink Ratio: 50% Fixed
- Mounting Pole Mount Kit (Included)
- LEDs (8) Status LEDs:
- Data Port Speed
- Data Port Link/Activity
- Configuration Port Speed
- Configuration Port Link/Activity
- GPS Synchronization
- Modulation Mode
- Master/Slave
- Two-Digit LED Display Calibrated in dBm for Alignment
- 10/100/1000 Ethernet Data Port
- 10/100 Ethernet Port Configuration Port
- RJ-12 Alignment Tone Port
- Power Supply: 50V, 1.2A PoE GigE Adapter (Included)
- Max. Power Consumption: 50 W
- Supported Voltage Range 42-58VDC
- Certifications CE, FCC, IC
- Wind Loading: 770 N @ 200 km/hr (170 lbf @ 125 mph)
- Wind Survivability: 200 km/hr (125 mph)
- Operating Temperature: -40 to 55° C
- Dimensions: 593 x 768 x 370 mm (23.35 x 30.24 x 14.57")
- Weight: 17.3 kg (38.14 lb) Mount Included
Documentation
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.