Wilmore DC-DC Converter 24 Vdc In, 12 Vdc Out, 15 Amp Continuous

Wilmore DC-DC Converter 24 Vdc In, 12 Vdc Out, 15 Amp Continuous 19" Rack Mount

1650-24-12-15 DC-DC converter, input voltage: 24 VDC nominal, negative ground (20 – 30 VDC), output voltage: 12 VDC nominal, and negative ground maximum output current: 15 A, continuous.  Designed to power 12-volt or 24-volt equipment from a variety of vehicular battery systems, these dc-to-dc converters feature high conversion efficiency, low standby power consumption, good noise suppression, and electrical and mechanical ruggedness.

Characteristics

Input/Output

• Input voltage: 24 Vdc nominal, negative ground (20 to 30 Vdc)

• Output voltage: 12 Vdc nominal, negative ground

• Maximum output current: 15 amperes, continuous

Output-Voltage Variation

• Line: Output voltage is directly proportional to input voltage

• Load: Approximately ±0.3 volts for the load range

• 0.5 to 15 amperes

Output-Voltage Ripple

• Typically less than 10 millivolts rms, 50 millivolts peak-to-peak

• Protection

• Protected by an input power fuse against short circuits and accidental reversal of input polarity

• Ambient Operating Temperature Range  -30˚C to +60˚C

Mechanical

• Size: 1.9”h x 4.5”w x 5.5”d excluding mounting

• flanges and fuse holder. Add 0.7” to height for fuse

• holder and terminal block.

• Weight: 1.0 lbs.

• Mounting: Mounting flanges on base will accept #10 screws. The hole pattern is 4.0” x 5.0” on center

Datasheet