Cellular Vehicular 5.8 dBi Antenna MIMO 4 LTE + 2 WiFi + GPS

Cellular Vehicular 5.8 dBi Antenna MIMO 4 LTE + 2 WiFi + GPS  (7 in 1 antenna)  5G Compatible!

The MIMO-3-V2-157 consists of a 7-in-1 antenna system within a single housing, providing 4x Cellular, 2x Wi-Fi and a GPS/GLONASS. This antenna is specifically designed for the transportation and marine industry. The 4x Cellular MIMO antennas cover the contemporary 690MHz to 2700MHz bands, as well as the new emerging LTE and 5G spectrum for 450MHz and 3.5GHz CBRS bands, which are becoming popular for LTE. This antenna, due to its wideband capabilities, can be used across different operators and technologies and is ready for future cellular technologies such as 5G up to 3.8GHz.

The antenna provides two separate dual-band Wi-Fi antennas, providing concurrent 2.4GHz and 5GHz on each antenna with 2×2 MIMO capability.

The fifth antenna is a high-performance active GPS/GLONASS system operating down to -40 degrees. The radiation patterns of all elements provide an excellent balance between omnidirectionality, pattern diversity, and radiation abilities. The MIMO-3-17 main applications are commercial and industrial vehicles, marine, M2M and other IoT systems using a wide range of radio technologies.

• 5G, 4G and backwards compatible with 3G and 2G technologies

• 4 x MiMo LTE, GPS & GLONASS and 2.4 and 5.8 GHz WiFi

• Ultra-wideband operation

• Cleverly designed decorrelated antennas give superior MIMO performance in cellular bands

• Careful mechanical design provides ruggedness, corrosion, water, dust resistance (IP68)

• Transport broadband, automation, and telemetry for Busses, Utility, Trucking & Public Safety vehicles

• Industrial factory automation, robotic machinery, and other M2M systems telemetry

• Farming & Agricultural automation such as M2M & IoT

• Broadband cellular for Marine (inland and near-coastal vessels)

• Mining Vehicles & Machinery communications, telemetry and automation (M2M & IoT)

GSM/3G/LTE electrical specifications

• Frequency Bands: 410-470 MHz, 690-960 MHz, 1710-2700 MHz, 3400-3800 MHz

• LTE Max Gain: 5.8 dBi

• LTE VSWR: <2.5:1

• Feed Power Handling: 10 W

• Input impedance: 50 Ohm (nominal)

• Polarization: Linear Vertical x 2

Wi-Fi Electrical Specifications

• Frequency: 2400-2500 MHz

• 5000-6000 MHz

• Gain (Max): 7 dBi

• VSWR: < 2.5:1 over 95% of the band

• Feed power handling: 10 W

• Nominal input impedance: 50 Ohms

• Polarization: 2 x Vertical linear

Mechanical:

• Product Dimensions (L x W x D): 10″ x 5″ x 5.7″

• Weight: 2 lbs, 10 oz

• Radome Material: UV Stable SAN Marine ASA

• Radome Colour: Brilliant White

• Cable Length: 2 Meters (82.5 Inches)

• Cable Type: RTK-031

• Connector: 7 x SMA male