Related Products
RJ45 Plug to Terminal Block Adapter
RJ45 Plug to Terminal Block
If you need to connect an RJ45 cable (a.k.a Ethernet) to a board with an Ethernet Jack - this adapter will come in very handy! No soldering required. Just use a slim screwdriver to open up the terminal blocks, slide in your stranded or solid-core wire and re-tighten. Note that these aren't recommended for actual Ethernet traffic, but for basic power/data distribution and the serial connections that a lot of radios have then RJ45's are great!
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.