CradlePoint MBR1400 Manual

CradlePoint MBR1400 Manual

Share on Social Networks

Share Link

Use permanent link to share in social media

Share with a friend

Please login to send this presentation by email!

Embed in your website

Select page to start with

1. C

17. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 15 2 HARDWARE OVERVIEW

20. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 18

158. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 156 Example Configuration:

18. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 16

19. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 17 2.1 Ports , Buttons, and Switches

77. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 75 5.12 WiPipe QoS View the breakdown of packets and bytes sent and received associated with each WiPipe QoS rule.

108. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 106 Routes : Set RIPng static routing announcement of specified network address.

213. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 211 you need to create data usage rules for each WAN device you will be load balancing. Make certain to select the "Use with Load Balancing" checkbox in the Data Usage rule editor.

85. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 83 Zscaler Zscaler ( http://www.zscaler.com ) is a cloud based web filtering and security provider that offers several plan options. Depending on your Zscaler implementation, this could include: • Global Cloud Platform

172. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 170 7.2 CP Connect CP Connect is a licensable feature used to create a connection to a private network. CP Connect is currently in beta. CP Connect tunnels can be used to create a connection to a private network.

223. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 221 Global Positioning System Fix Data. Time, position , and fix rela ted data for a GPS receiver. eg2. $ -- GGA,hhmmss.ss,llll.ll,a,yyyyy.yy,a,x,xx,x.x,x.x,M,x.x,M,x.x,xxxx hhmmss.ss = UTC of position llll.ll = latitude of position a = N or S yyyyy.yy = Longitude of position a = E or W x = GPS Quality indicator (0=no fix, 1=GPS fix, 2=Dif. GPS fix) xx = number of satellites in use x.x = horizontal dilution of precision x.x = Antenna altitude above mean - sea - level M = units of antenna altitude, meters x.x = Geoidal separation M = units of geoidal separation, meters x.x = Age of Differential GPS data (seconds) xxxx = Differential reference station ID eg3. $GPGGA,hhmmss.ss,llll.ll,a,yyyyy.yy,a,x,xx,x.x,x.x,M,x.x,M,x.x,xxxx*hh 1 = UTC of Position 2 = Latitude 3 = N or S 4 = Longitude 5 = E or W 6 = GPS quality indicator (0=invalid; 1=GPS fix; 2=Diff. GPS fix) 7 = Number of satellites in use [not those in view] 8 = Horizontal dilution of position 9 = Antenna altitude above/below mean sea level (geoid) 10 = Met ers (Antenna height unit)

224. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 222 11 = Geoidal separation (Diff. between WGS - 84 earth ellipsoid and mean sea level. - =geoid is below WGS - 84 ellipsoid) 12 = Meters (Units of geoidal separation) 13 = Age in seconds since last update from diff. reference station 14 = Diff. reference station ID# 15 = Checksum

32. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 30 4.1 Administrator Login To access the administration p ages, open a Web browser and type the hostname “ cp/ ” or IP address “ http://192.168.0.1 ” into the address bar. The Administrator Login page will appear. Log in using your administrator password. Initially, this password can be found on the bottom of the MBR1400 unit as the Default Password . This password is also the last eight digits of the unit’s MAC address.

8. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 6 1.3.1 Cradlepoint Enterprise Cloud Manager Rapidly deploy and dynamically manage networks at geographically distributed stores and branch locations with Enterprise Cloud Manager, Cradlepoint ’s next generation management and application platform. Enterprise Cloud Manager integrates cloud management with your Cradlepoint devices to improve productivity, increase reliability, reduce costs, and enhance the intelligence of your network and business operations. Learn more at http:// Cradlepoint .com/ecm . 1.3.2 Captive Po rtal The Captive Portal solution provided by Cradlepoint routers enables businesses to provide their customers with a public WiFi hotspot with access controls. The controls can be as simple as requiring acceptance of a terms of s ervice agreement, while a dvanced features allow administrators to control and monitor usage, require login, direct users to specific web pages, provide revenue through services fees or paid advertising , and more.

29. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 27 p age s an d manually upload the firmware. Go to System Settings → System Software and click on “Manual Firmware Upload”. If you are still n ot online after activating the modem, go to knowledgebase. Cradlepoint .com for more information.

169. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 167 Process Timeout: If the process fails an error message will display. Activation has a 3 - minute timeout, PRL update has a 4 - minute timeout, and FUMO has a 10 - minute timeout. 7.1.12 Configuration Rules (Advanced) This section allows you to create general rules that apply to the Internet connections of a particular type. These can be general or very specific. For example, you could create a rule that applies to all WiMAX modems, or a rule that only applies to an Internet source with a particular MAC address. The Configuration Rules list shows all rules that you have created , as well as all of the default rules. These are listed in the order they will be applied. The most general rules are listed at the top, and the most specific rules are at the bottom. The router goes down the list and applies all rules that fit for attached Internet sources. Configuration settings farther down the list will override previous settings. Select any of these rules and click “Edit” to change the settings for a rule. To create a new rule, click “Add.”

239. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 237 8.4 Feature Licenses Some Cradlepoint features may require a license. These features are disabled by default. To obtain a feature license, contact your Cradlepoint sales representative. Once you have obtained the feature license file, upload the file to enable the feature. A reboot is required after uploading a feature license file.

73. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 71 Data Usage: A measure of amount of information that is currently being sent or received through the network. Sample rate and size can be adjusted from the dropdown boxes.

141. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 139 6.9.2 Rules A traffic shaping r ule identifies a specific message flow and assigns that flow to one of the queues created above. Click Add to create a new Traffic Shaping rule.

171. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 169 Condition: Select “is,” “is not , ” “st arts with,” “contains,” or “ends with” to create your condition’s statement. Value : If the correct values are available, select from the dropdown list. You may need to manually input the value. The condition will be of the following form: “ (When) is/is not (value) ” For example: “ Type is not WiMAX ” “ Port is USB Port 1 ” Once you have established the condition for your configuration rule, choose from the other tabs to set the desired configuration. All of the tabs have the same configuration options shown above in the WAN Configuration section ( i.e. , the options for Configuration Rules are the same as they are for individual devices).

39. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 37 10) Review the details and record your wireless network name, administrative password, and WPA password (or WEP key). Mov e your mouse over your WiFi password to reveal it . Please record these settings for future access. You may need this information to configure other wireless devices. NOTE: If you are currently using the MBR1400 WiFi network, reconnect your devices to the network using the new wireless network name and security password. Cli ck APPLY to save the settings and update them to your router.

72. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 70 5.9 Statistics The Statistics sub menu option displays basic traffic statistics. Wireless Statistics : View the signal strength and other wireless modem information. The wireless device’s signal strength will only be displayed as long as it supports “Live Diagnostics.” Sample rate and size can be adjusted from the dropdown boxes.

74. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 72 Failover/Failback/Load Balance: An easy way to view current connective states of the devices plugged into the router as compared to the past. Sample rate and size can be adjusted from the dropdown boxes.

192. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 190 7.10 VPN Tunnels VPN (virtual private network) tunnels are used to establish a secure connection to a remote network over a public network. For example, VPN tunnels can be used across the Internet by an individual to connect to an office network w hile traveling or by tw o office networks to function as one network . The two networks set up a secure connection across the (normally ) unsec ure Internet by assigning VPN encryption protocols. The MBR1400 uses IPsec ( Internet Protocol s ecurity) to authenticate and encrypt packets exchanged across the tunnel. To set up a VPN tunnel with the MBR1400 on one end, there must be another device (usua lly a router) that also supports IPsec on the other end. IKE ( Internet Key Exchange) is the security protocol in IPsec. IKE has two phases, Phase 1 and Phase 2. The MBR1400 has several different security protocol options for each phase, but the default selections will be sufficient for most users. The VPN tunnel status page allows you to view the state of the VPN tunnels. If a tunnel fails to connect to the remote site, check the System Logs for more information. You may double click on a cell to direct ly edit that information. Click Add to configure a new VPN tunnel.

210. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 208 DSCP (DiffServ): Differentiated Services Code Point is the successor to TOS (Type of Service). Use this field to select traffic based on the DSCP header in each IP packet. This field is sometimes set by latency sensitive equipment such as VoIP phones. If you know specific DSCP values, you can input one here. DSCP Negate: When checked this rule will match on any packet that does NOT match the DSCP field. Protocol: Sel ect from the dropdown list to specify the protocol for a particular data use. Otherwise, leave “Any” selected.

226. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 224 Enable SMS support SMS support is enabled by default on the router. Deselect this to disable. Password By defaul t, the password is the last 8 characters of the router’s MAC address (i.e., the Default Password on the product label). You can change this password to anything between 1 and 16 characters. It should be long enough to be useful for security but short enoug h to easily type into your phone (or other texting client). White List This list is blank by default, which means that the router will accept SMS messages from any phone number. Leaving this blank is unsecure, so Cradlepoint recommends that you add phone numbers to this list. Once any numbers are listed, only those numbers have the ability to connect to the router via SMS. NOTE: You cannot add email address es to the White list. When a phone number is added to the White List , email SMS messages will be rejected.

269. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 267 OT HER BINDING DOCUMENTS; TRADEMARKS; COPYRIGHT By activating or using your MBR1400 device, you agree to be bound by Cradlepoint ’s Terms of Use, User License and other Legal Policies, all as posted at www. Cradlepoint .com/legal. Please read these documents ca refully. Cradlepoint , the Cradlepoint logo, and MBR1400 are trademarks of Cradlepoint , Inc.

272. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 270 http://www. Cradlepoint .com/ Copyright © 2013 by Cradlepoint , Inc. All rights reserved.

71. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 69 NEMO Routes displays user - specified routes configured in Internet → Network Mobility (NEMO) .

195. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 193 The condition will be of the following form: “ (When) is/is not (value) ” For example: “ Type is not WiMAX ” “ Port is USB Port 1 ” If you intend to h ave multiple WAN devices connected simultaneously, with either Load Balancing or more likely WAN Affinity, then you may consider using the Invert WAN Binding option which will invert the expression to only establish the VPN tunnel when the specified WAN Bi nding devices are NOT connected. Invert WAN Binding : Advanced option that inverts the meaning of WAN Binding to only establish this tunnel when the spe cified WAN Binding device(s) are NOT connected. This is typically useful when the VPN tunnel is being use d as a hot - spare on a router with multiple active WAN connections and the VPN tunnel is only needed in the absence or unavailabil ity of a particular WAN device (for example, an M PLS - based WAN device) .

30. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 28 • 3.3.3 You are connected to the r outer b ut cannot c onnect to the Internet The status LEDs of your router will give you an indication whether or not a proper connect ion is being made. See the LED STATUS definitions below: If the data m odem LEDs are not illuminated, your modem is not connected and online. You may need to update firmware. Refer to the previous section, “ Your USB or ExpressCard modem does not work with the r outer .” If you are still not online after activating the modem , go to knowledgebase. Cradlepoint .com for more information .

22. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 20 2.2 LEDs LAN and WAN LEDs : The default se ttings are shown. LAN ports can be reconfigured to function as WAN ports a nd vice versa; the LEDs will function accordingly.

49. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 47 5.2 CP Connect View the status of configured CP Connect tunnels. To set up or edit a CP Connect tunnel, go to Internet → VPN Tunnels . NOTE : CP Connect requires a feature license . Go to Syst em Settings → Feature Licenses to enable this feature .

54. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 52 5.4 GPS If GPS support is enabled and a modem capable of providing GPS coordinates is connected, this page shows a graphical view of your router's location. See the GP S section in System Settings → Administration to enable GPS support. GPS information is only displayed if 1) the modem supports GPS, 2) your carrier allows the GPS functionality, and 3) the modem has sufficient GPS signal strength. If no information is di splayed, check that both the modem and your carrier support GPS. If GPS is supported , make sure the modem is in an area where it can receive a signal from the GPS satellites.

23. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 21 3 QUICK START 3.1 Basic Setup • Your router requires an Internet source. Attach a Cradlepoint business - grade m odem, insert one or more supported USB or ExpressCard modem( s ) , connect a cable or DSL modem to the b lue Ethernet WAN port , or connect to an available WiFi source . For failover/failback functionality, you will need at least two of these sources (for exampl e: one Ethernet source and one USB modem) . 1 • Attach the three included WiFi antennas to the connectors for maximum WiFi broadcast. To attach, hold the antenna straight and twist the base of the antenna to connect, folding the joint if needed. Please note th at 2.4 GHz antennas are provided . 5 GHz antennas are available as an accessory. • C onnect the 12v DC power adapter to the router and a power source . Flip the power switch to the ON position; this illuminate s the green power s tatus LED. 1 This product requires a data modem with an active data plan for full functionality. Data modem only inc luded with ARC models. See your 3G/4G service provider for details on coverage and data plan options. For full 3G/4G func tionality, attach one (or more) of the following:

41. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 39 WiFi Clients Click to view a signal strength indica tor for your network, “WiFi Connection Strength”. The number listed in the orange block shows the number of attached clients. Click this to go to the Client List page ( Status → Client List ). Logout Click to log out of the administration pages.

123. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 121 Schedule : Set up a schedule for this network interface. This allows an interface to be enabled or disabled during specific hours of a day. For example, use this to limit a Hotspot network to business hours. Schedule Service : (Default: Disabled.) Select to enable. This will open a configurable chart for setting the schedule. Each hour of the week is represented by a black or gray square. Black represents disabled, while gray represents enabled. Hover over a square to reveal t he hour it represents. Click on the squares to toggle between black and gray. In the example shown, the network is enabled from 8 - 5 on Monday through Friday, but disabled at all other times.

66. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 64 • Incoming Bytes • Outgoing Bytes

188. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 186 7.9 OpenVPN Tunnels NOTE: Using OpenVPN Tunnels requires a feature license and hardware version 2.0. Go to Syst em Settings → Feature Licenses to enable this feature . Once you have a valid feature license, click Add to create a new OpenVPN tunnel.

208. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 206 7.11.4 Wireless Scan Settings Scan Interval: How often WiFi as WAN scans the environment for updates. (Default: 60 seconds. Range: 5 - 3600 seconds.) Scan While Connected: Continue to scan for WiFi as WAN profile updates when connected. Each time a scan occurs the wireless communication of the router will be temporarily interrupted. Normally this should be disabled.

218. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 216 8.1.2 System Clock Enabling NTP will tell the router to get its system time from a remote server on the Internet. If you do not enable NTP then the router time will be based on when the router firmware was built, which is guaranteed to be wrong. Whenever the Internet connection is re - established and once a week thereafter the router will ask the server for the current time so it can correct itself. You then have the option of selecting an NTP server and adjusting the NTP server port. Select the NTP server from the dropdown list. Any of the given NTP servers will be sufficient unless, for example, you need to synchronize your router’s time with other devices in a network. Time Zone: Select from a dropdown list. Setting your Time Zone is required to properly show time in your router log. Daylight Savings Time: Select this checkbox if your lo cation observes daylight savings time.

181. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 179 7.6 L2TP Tunnels NOTE: L2TP requires a feature license and hardware version 2.0 . Go to System Settings → Feature Licenses to enable this feature. Layer 2 Tunneling Protocol (L2TP) tunnels can be used to create a connection between two private networks. Once you have a valid feature license, click Add to create a new L2TP tunnel.

48. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 46 • - 26 dBm : A relative meas ure of wireless signal quality (decibels relative to one milliwatt). This express es theoretical best quality. The value is given as a negative exponent: - 20 is a very g ood value while - 8 0 is relatively poor. Signal qualit y can be reduced by distance, by interference from other radio - frequency sources (such as cordless telephones or neighboring wireless networks), and by obstacles between the router and the wireless device. Time Online: Simply the amount of time the device has been connected to the router. Kick: Click on this button to disconnect a client.

98. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 96 Add/Edi t Allowed Remote Access Addresses IP Address : The IP address that will be allowed to access administrative services through the WAN . Netmask (Optional): The n etmask allows you to specify what IP address sets will be allowed access. If this field is left empty a netmask of 255.255.255.255 will be used , which means that only the single specified IP address would have remote administration access .

112. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 110 6.8 WiFi / Local Network s This section is used to configure the settings for networks created by your router (LAN) . Note that changes made in this section may also need to be duplicated on wireless devices that you want to connect to your wireless network. For example, if you change a wireless LAN ’s IP address, devices within that network will lose connection. They w ill have to reconnect to the network. The user can set up multiple networks on the MBR1400, each with its own unique configuration and its own selection of interfaces. Each local network can be attached to any of the following types of interfaces: • WiFi • Et hernet • VLAN For example, one network might be just an isolated WiFi hotspot for guests, while another might be the main network with administrative access, an Ethernet port, a password - protected WiFi SSID, and a VLAN interface.

185. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 183 Home Agent IP Address , Hom e Agent Password , and Home Agent SPI – Your home a gent will be defined by your NEMO service provider. Renew Registration – The NEMO network regularly re - registers with the home agent (e.g., every 30 seconds) . S pec ify the number of seconds between each check - in. MTU – Override the MTU (maximum transmission unit) of the NEMO tunnel. The TCP MSS (maximum segment size) is automatically derived from the MTU . Leave blank to rely on Path MTU D iscovery .

203. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 201 Tunnel Connect Retry: Default: 30 seconds. Range: 10 - 255 s econds. 30 seconds will be sufficient in almost all cases. 7.10.8 VPN with NAT - T If one side of a planned VPN tunnel is behind a NAT (network address translation) firewall, the setup of your tunnel requires the following specifications: 1. Each side of the tunnel m ust use both a Local Identity and a Remote Identity . These must match the identities on the other side: The Local Identity must match the Remote Identity on the other side of the tunnel, and vice versa. In this case, these identities can each be a simple w ord. 2. The Tunnel Name for the side of the tunnel that is not behind the NAT firewall must be “anonymous”. 3. The VPN tunnel must be initiated from the side that is behind the NAT firewall.

69. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 67 5.8 Routing System Routes displays routes associated with networks connected to the router as well as routes learned from routing protocols (such as RIP or BGP). Static Routes displays user - specified routes c onfigured in Network Settings → Routing .

128. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 126 Wireless Network Editor WiFi Name (SSID): When users browse for available wireless netw orks, this is the name that they will see . This name is referred to as the SSID (service set identifier) . For security purpo ses, Cradlepoint highly recommends that you change this from th e pre - configured name. Hidden: This shows whether the router broadcasts its SSID. It is somewhat harder for hackers to find and attack a router that is not broadcasting its SSID, which adds to the wireless security, but it is also more difficult for friendly users to attach to a WiFi network with a hidden SSID. Isolate: Select this to i solate all wireless clients so they cannot directly communicate with each other on the wireless network. WMM: WiFi Multimedia. This is a basic traffic shaping, or QoS (quality of service), system for the network. WM M works behind the scenes to set priorities for different types of traffic on your network. For example, video streams are give n higher priority than print jobs, since video streams need consistent throughput . Enabled: Whether the network is available.

82. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 80 6.1.3 MAC Address Web Filter Rules MAC Address Web Filter Rules allow you to control access from a specific MAC address to external d omains or websites. The settings for the MAC Address Web Filter Rules section match those for the Network Web Filter Rules , except that you must assign a MAC address instead of a network to each rule. See the Network WebFilter Rules section for mor e configuration details.

161. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 159 PPPoE: • Username • Password • Password Confirm • Service • Auth Type: None, PAP, CHAP

202. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 200 7.10.7 Global VPN Settings These settings apply to all configured VPN tunnels. Enable Certificate Support : Enabling Certificate Support will allow you to load a certificate for VPN to the router. Click the “Upload Certificate” button that appears to browse for a certificate on a local device. Disabling certificate support will no longer use any previously loaded certificate but will not delete it from the router. Only one certificate at a time is supported. IKE / ISAKMP Port: Internet Key Exchange / Internet Security Association and Key Management Protocol port. Default: 500. This is a standard VPN port that usually does not need to be changed. IKE / ISAKMP NAT - T Port: Internet Key Exchange / Internet Security Association and Key Management Protocol network address translation traversal port. Default: 4500. This is a standard VPN NAT - T port that usually does not need to be changed. NAT - T KeepAlive Interval: Default: 20 seconds. Range: 0 - 3600 seconds. 20 seconds will be sufficient in almost all cases.

160. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 158 Static (Manual): • IP Address • Subnet Mask • Gateway IP • Primary DNS Server • Secondary DNS Server

122. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 120 M ulticast Proxy : IGMP ( Internet Group Management Protocol ) multicast proxy allows a single packet to reroute to multiple destinations (see the Wikipedia explanation of m ulticast ). This may be used for IPTV , for example. Multicast Proxy: Select to enable IGMP proxy support to allow multicast streams to flow across this network. By default, enabling multicast proxy enables a multicast connection with devices within the LAN. In rare cases, additional IP address ranges need access to the multicast streams. Click Add and input the IP Address and Netmask for an additional IP address range.

173. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 171 7.3 Client Data Usage Client Data Usage displays upload and download traffic for each LAN client. Click Enable Client Data Usag e Monitoring Service to begin tracking this information. This data is not re tained between router reboots. For each client this shows: Name, IP address, MAC address, amount of data (MB) and number of packe ts uploaded, amount of data and number of pack ets downloaded, and when traffic was last sent or received for that client ( “ Last Traffic ”) . The names that are shown are received during a DHCP exchange. If a client disconnects and reconnects with a new IP address there will be an additional entry in this list. Pressing Reset Statistics will restart all counters at 0.

222. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 220 The following GPS spec is copied from http://aprs.gids.nl/nmea/ 8.1.6 $GPGGA – Global Positioning System Fix Data Name Example Data Description Sentence Identifier $GPGGA Global Positioning System Fix Data Time 170834 17:08:34 Z Latitude 4124.8963, N 41d 24.8963' N or 41d 24' 54" N Longitude 08151.6838, W 81d 51.6838' W or 81d 51' 41" W Fix Quality: - 0 = Invalid - 1 = GPS fix - 2 = DGPS fix 1 Data is from a GPS fix Number of Satellites 05 5 Satellites are in view Horizontal Dilution of Precision (HDOP) 1.5 Relative accuracy of horizontal position Altitude 280.2, M 280.2 meters above mean sea level Height of geoid above WGS84 ellipsoid - 34.0, M - 34.0 meters Time since last DGPS update blank No last update DGPS reference station id blank No station id Checksum *75 Used by program to check for transmission errors Courtesy of Brian McClure , N8PQI.

26. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 24 3.2.3 Connect to the Internet If you used the First Time Setup Wizard , you might have changed t he “WiFi Network Name” or the “Security Mode” passwor d. If so, you will need to reconnect to the MBR1400 network. • Find the network . Look for your new personalized network name ( or the default SSID of the form “MBR1400 - xxx ” ). • Log in using your new personalized WiFi security password (or the Default Password found on the product label on the bottom of the router) . Your network should now be up and running, and users who have the security password can access the network on WiFi - enabled devices.

56. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 54 5.6 Hotspot Clients View the status of the clients that have logged in through the Hotspot/Captive Portal. View: • Hostname • IP address • MAC address • Data Usage (both IN and OUT) • Time Online You may revoke a client's access to the Internet by clicking the 'Revoke' button.

99. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 97 6.5 MAC Filter / Logging A MAC (Media Access Control) address is a unique identifier for a computer or other devic e. This page allows you to manage clients by MAC address. You can filter clients by MAC addresses and/or keep a log of devices connected to your router. 6.5.1 Filter Configuration The MAC Filter allows you to create a list of devices that have either exclusive access (whitelist) or no access (blacklist) to your wireless LAN. Enabled: Click to allow MAC Filter options. Whitelist: Select either “Whitelist” or “Blacklist” from a dropdown menu . In "Whitelist" mode, the router will restrict WiFi access to all computers except those contained in the "MAC Filter List" panel. In “Blacklist” mode, listed devices are completely blocked from WiFi access. MAC Filter List (Whitelist or Blacklist) : Ad d devices to either your whitelist or black list simply by inputting ea ch device’s MAC address. NOTE: Use caution when using the MAC Filter to avoid accidentally blocking yourself from accessing the router.

119. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 117 IPv4 DHCP : Changing settings for the IPv4 DHCP server is optional. The d efault selections are almost always sufficient. DHCP Server : (Default: Enabled) When the DHCP s erver is enabled, users of your network will be able t o automatically connect to the Internet without any special configuration. It is recommended that you leave this enabled. Disabling the DHCP s erver is only recomm ended if you have another DHCP s erver on your network and it is configured properly. Range Start and Range End : These designate the range of values in the reserved pool of IP addresses for the DHCP server. Values within this range will be given to a ny DHCP enabled computers on your network. The default values are almost always sufficient (default: 72 to 200, as in 192.168.0.72 to 192.168.0.200). Example: The router uses an IP address of 192.168.0.1 for its primary network by default . A computer desi gnated as a Web server has a static IP address of 192.168.0.3. Another computer is designated as an FTP server with a static IP address of 192.168.0.4. The starting IP address for the DHCP server needs to be 192.168.0.5 or higher . Lease Time: [Default: 72 0 minutes (12 hours)] The lease time specifies how long DHCP - enabled computers will wait before requesting a new DHCP lease. Smaller values are better suited to busy environments.

236. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 234 Advanced: Delivery Options Email Subject Prefix: This optional string is prefixed to the alert subject. It can be customized to help you identify alerts f rom specific routers. Retry Attempts: The number of attempts made to send an alert to the mail server. After the attempts are exhausted, the alert is discarded. Retry Delay: The delay between retry attempts.

44. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 42 4.5 Enterprise Cloud Manager Registration To register your device with Cra dlepoint Enterprise Cloud, navigate to Getting Started → Enterprise Cloud Man ager Registration . Input your ECM Username and ECM Password and click Register . You have now registered the device with Enterprise Cloud Manager. If you do not have ECM credentials, see http://www. Cradlepoint .com/ecm for details or sign up at: http://www. Cradlepoint .com/ecm - signup .

135. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 133 TX Power: Normally the wireless transmitter operates at 100% power. In some circumstances, however, there might be a need to isolate specific frequencies to a smaller area. By reducing the power of the radio, you can prevent transmissions from reaching beyond your corporate/home office or designated wireless area. RTS Threshold: When an excessive number of wireless packet collisions are occurring, wireless performance can be improved by using the RTS/CTS (Request t o Send/Clear to Send) handshake protocol. The wireless transmitter will begin to send RTS frames (and wait for CTS) when data frame size in bytes is greater than the RTS Threshold. This setting should remain at its default value. Fragmentation Threshold: W ireless frames can be divided into smaller units (fragments) to improve performance in the presence of RF interference and at the limits of RF coverage. Fragmentation will occur when frame size in bytes is greater than the Fragmentation Threshold. This set ting should remain at its default value. Setting the Fragmentation value too low may result in poor performance. DTIM: A DTIM is a countdown informing clients of the next window for listening to broadcast and multicast messages. When the wireless router has buffered broadcast or multicast messages for associated clients, it sends the next DTIM with a DTIM Interval value. Wireless clients detect the beacons and awaken to receive the broadcast and multicast messages. The default value is 1. Valid settings a re between 1 and 255. Beacon: Beacons are packets sent by a wireless router to synchronize wireless devices. Specify a Beacon Period value between 20 and 1000 milliseconds. WPS: WiFi Protected Setup is a method for easy and secure establishment of a wireless network. It can be used instead of passwords when connecting clients that support WPS. Short Slot: Slot Time is the period wireless clients use in determining if the channel is free for transmission. Enabling this value allows clients that can utilize a shorter time to do so. Disabling this option forces all clients to use a longer backo ff check and thus may reduce network throughput while reducing the number of transmission c ollisions.

142. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 140 Traffic Shaping / QoS Rule Editor The first page of the Traffic Shaping / QoS Rule Editor allows you enable/disable the rule, name the rule, specify a protocol for the rule, and select a queue to associate the rule with. Rule Enabled: (Default: Enabled.) Deselect this to disable t his rule. This can be useful for quickly changing configurations. If both upload QoS and download QoS are disabled then the rule will disable automatically. Rule Name: Create a name for the rule that is meaningful to you. Protocol. The protocol used by the messages: TCP /UDP, TCP , UDP , or ICMP . Select “Any” if your rule does not control a specific type of message that uses a specific protocol. Queue Name: Select a queue to associate this rule with. Click Next to continue to the next page.

145. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 143 7.1 Connection Manager The router can establish an uplink via the E thernet WAN port, WiFi as WAN, or modems plugged into a modem port. If the primary WAN connection fails the router will automatically attem pt to bring up a new link on another device. This feature is called failover. If Load Balance is enabled, multiple WAN devices may be plugged in and each may establish a link. 7.1.1 WAN Interfaces This is a list of the available interfaces used to access the I nternet . You can enable, stop, or start devices from this section. By using the priority arrows ( the arrows in the boxes to the left — these show if you have more than one available interface ), you can set the interface the router uses by default and the ord er that it allows failover. In the example shown, Ethernet is set as the primary Internet source, while a USB modem is attached for failover . The Ethernet is “ Unplugged ” while the modem is “ Connected .” Load Balance: If this is enabled, the router will use multiple WAN interfaces to increase the data transfer throughput by using any connected WAN interface consecutively. Selecting Load Balance will automatically start the WAN interface and add it to the pool of WAN in terfaces to use for data transfer. Turning off Load Balance for an active WAN interface may require the user to restart any current browsing session. Enabled: Selected by default. Deselect to disable an interface. C lick on the small box at the top of the list to select/deselect all devices for either Load Balance or Enabled . Click on a device in the list to reveal additional information about that device and to enable configuration options.

231. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 229 Sample Debug Session The following is an example of a debug session to discover a modem’s APN is mi sconfigured and needs to be set. Figure out the state of the modems on the router : 1234,rstatus, Receive the modem’s status and settings : 1234,mstatus, Set the modem’s APN to the correct setting : 1234,apn,bro adband, Verify the APN was set properly : 1234,mstatus, Continue to verify the status periodical ly to ensure that the modem connects: 1234,rstatus,

4. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 2 7.4 D ATA U SAGE ................................ ................................ ... 172 7.5 GRE T UNNELS ................................ ................................ . 176 7.6 L2TP T UNNELS ................................ ................................ 179 7.7 N ETWORK M OBILITY (NEMO) ................................ ........... 182 7.8 NHRP C ONFIGURATION ................................ .................... 184 7.9 O PEN VPN T UNNELS ................................ ......................... 186 7.10 VPN T UNNELS ................................ ............................... 190 7.11 W I F I AS WAN / B RIDGE ................................ .................. 202 7.12 WAN A FFINITY AND L OAD B ALANCING ............................... 207 8 SYSTEM SETTINGS ................................ ......................... 212 8.1 A DMINISTRATION ................................ ............................. 213 8.2 D EVICE A LERTS ................................ ................................ . 232 8.3 E NTERPRISE C LOUD M ANAGER ................................ ............ 235 8.4 F EATURE L ICENSES ................................ ............................ 237 8.5 H OTSPOT S ERVICES ................................ ........................... 238 8.6 S ERIAL R EDIRECTOR ................................ ........................... 242 8.7 SNMP C ONFIGURATION ................................ .................... 244 8.8 S YSTEM C ONTROL ................................ ............................. 247 8.9 S YSTEM S OFTWARE ................................ ........................... 248 9 GLOSSARY ................................ ................................ ..... 250 10 APPENDIX ................................ ................................ ... 265 10.1 P RODUCT I NFORMATION AND S AFETY G UIDE ....................... 265 10.2 S PECIFICATIONS ................................ .............................. 268

70. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 68 GRE Routes displays user - specified routes configured in Internet → GRE Tunnels . VPN Routes displays user - specified routes configured in Internet → VPN Tunnels .

138. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 136 6.9.1 Queues Queues and rules work in conjunction to prioritize bandwidth for the most critical operations. Multiple rules can be associated with one queue. Use rules to associate your more critical operations with qu eues that have higher bandwidth settings. For example, you might have two queues, one for “critical” and one for “secondary” with critical having most of the bandwid th percentage. Use rules to associate your most important bandwidth needs (POS system, VoIP, etc.) with the critical queue. Restrict the bandwidth available for less important functions with the secondary queue . Assign percentages of both upload and downlo ad bandwidth to each queue. If you assign 80% download bandwidth to the first queue, the next queue will be forced to be 20% or less. Click Add to create a new Traffic Shaping/QoS queue. Queue Name: Choose a name that is meaningful to you. Upload Bandwidt h Enable Upload QoS: ( Default: Enabled.) Deselect if you want your rule to apply to download traffic only. Leave this selected to include upload restrictions with this queue. Borrow Spare Bandwidth: ( Default: Enabled.) When this is enabled, the interfaces/protocols associated with this rule will borrow unused bandwidth from other rules. Disabling borrowing will restrict the traffic to the specified bandwidth. Higher priority queues will be offered excess bandwidth first. Upload Bandwidth: Th is is the percentage of the connected WAN upload bandwidth that will be reserved for the specified traffic. The maximum value is adjusted to the remaining percentage after other rules receive their share.

251. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 249 8.9.2 System Config Save/Restore Backup Current Settings: Click on “Save to disk” to s ave your current settings to a file on a computer. Restore Settings: Click on “Upload from file” to r estore your previous settings from a file on a computer. 8.9.3 Firmware Upgrade and System Config Restore Load new firmware and restore your previous settings from a file on a computer without rebooting between steps.

225. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 223 8.1.7 SMS SMS (Short Message Service, or text messaging) requires a cellular modem with an active data plan. SMS is not designed to be a full remote management feature: SMS allows you to connect to th e router for a few simple queries or commands with a text messaging service (e.g., from your phone). A modem that does not have an active data connection may still be reachable by SMS because Internet traffic and SMS traffic operate on separate channels, s o SMS can be used to bring on offline router back online. SMS is enabled on the router by default. However, it only works if SMS is supported and enabled on the modem. Most modems have SMS enabled by default, but the carrier may charge a fee for each text message sent or received. Contact your carrier to review these fees and/or to enable an SMS plan. Important notes about SMS: • Messages are limited to 160 characters. • SMS is not a guaranteed delivery protocol. The carriers do not guarantee that the SMS message will be delivered to the modem or that the modem’s response will be delivered to the sender. This means an administrator might have to send messages multiple times before the desired action is performed. • SMS is a slow protocol. It can take seconds or up to a few minutes for messages to be delivered. • SMS messages are not encrypted; they are sent in full readable text over the network.

55. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 53 5.5 GRE Tunnels View the status of configured GRE Tunnels. To set up or edit a GRE tunnel, go to Internet → GRE Tunnels . Included information: • Name • Status • Transmit (packets/bytes) • Receive (packets/bytes)

109. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 107 Redistribute Routes : Redistribute routes of the specified prot ocol or kind into BGP, with the metric type and metric set (if specified), filtering the routes using the given route map (if specified). Redistributed routes may also be filtered with distribute lists. • Type : The type is the source of the route. Select fro m: Main, Connected, Static, RIP, OSPF. • Metric: Numerical priority of the route. • Route Map : Route maps provide a means to filter and/or apply actions to routes, allowing policies to be applied to routes.

150. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 148 7.1.4 IP Overrides IP overrides allow you to override IP settings after a device’s IP settings have been configured. Only the fields that are filled out will be overridden. Override any of the following fields: • IP Address • Subnet Mask • Gateway IP • Prima ry DNS Server • Secondary DNS Server

199. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 197 7.10.4 Page 4: IKE Phase 2 Perfect Forward Secrecy (PFS) : Enabling this feature will require IKE to generate a new set of keys in Phase 2 rat her than using the same key generated in Phase 1. Additionally, the new keys generated in Phase 2 (with this option enabled) are exchanged in an encrypted session. Enabling this feature affords the policy greater security. Key Lifetime : The lifetime of the generated keys of Phase 2 of t he IPs ec negotiation from IKE. After the time has expired, IKE will r enegotiate a new set of Phase 2 keys. Phase 2 has the same selection of Encryption , Hash , and DH Groups as Phase 1, but you are restricted to only one DH Group. Phase 2 and Phase 1 selections do not have to match.

200. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 198 7.10.5 Page 5: Dead Pe e r Detection D ead Peer Detection (DPD) d efines how the router wil l detect when one end of the IPs ec session loses connec tion w hile a policy is in use. Connection Idle Time allows you to configure how l ong the router will allow an IPs ec session to be idle before beginning to send Dead Peer Detection (DPD ) packets to the peer machine. Request Frequency allows you to adjust the de lay between these DPD packets to send as quickly as every 2 s econds up to 30 seconds apart. Additionally, you can specify how many Maximum Requests to send at the selected time interval before the tunnel is considered dead . You must click Finish to save your VPN tunnel.

132. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 130 VLAN Interfaces A virtual local area network, or VLAN, functions as any other physical LAN, but it enables computers and other devices to be grouped together even if they are not physically attached to the same network switch. To enable a V LAN, select a VID (virtual LAN ID) and a group of Ethernet ports through which users can access the VLAN. Then go back up to the Local Network Editor to attach your new VLAN to a network. To use a VLAN, the VID must be shared with another router or similar device so that multiple physical networks have access to the one virtual network. Click Add to create a new VLAN interface. VLAN Editor VID: An integer value that is the Virtual LAN ID. Ethernet Group: Select the LAN port ( s ) with which you want to associate the VLAN ID from a dropdown list. Your Ethernet group must be created separately under Ethernet Port Configuration . Click Submit to save your configured VLAN.

116. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 114 IP v6 Settings : IPv6 must be enabled through the WAN initially: go to Internet → Connection Manager to enable IPv6. IP v6 Address Source : By default, this is set to Delegated , which means the IPv6 address range for the LAN is passed through from the WAN side. Change this to Static to input your own IPv6 address range here, or select None to explicitly disable IPv6 LAN connectivity.

117. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 115 Interfaces : Select network interfaces to attach to this network. Choose from WiFi, Ethernet ports, and VLAN interfaces. Double - click on any of the interfaces shown on the left in the Available section to move them to the Selected section on the right (or highlight an interface and click the “+” button). To deselect an interface, double - click on an interface in the Selected section (or highlight the interface and click the “ – “ button). If you want more interface options, you must configure additional WiFi, Ethernet port s, and VLAN interfaces separately. See the Local Network Interfaces section below (on this same administration page: Network Settings → WiFi / Local Networks ).

190. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 188 7.9.2 Remote Hosts Create a list of remote server connections to connect to. OpenVPN will try to connect to each host in the list. If a disconnect occurs from a given server, the next server will be tried in a round - robin fashion. • Host – IP address of the remote server. • Port – Spec ify the port if desired. • Protocol – Select UDP or TCP.

267. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 265 10 APPENDIX 10.1 Product Information and Safety Guide This important Product Information and Safety Guide contains safety, handling, disposal, regulatory, trademark, copyright, an d software licensing information. Read all safety information below and operating instructions before using the MBR1400 device to a void injury. SAFETY AND HAZARDS Under no circumstances should the MBR1400 device be used in any areas (a) where blasting is in progress, (b) where explosive atmospheres may be present, or (c) that ar e near (i) medical or life support equipment, or (ii) any equipment which may be susceptible to any form of radio interference. In such areas, the MBR1400 device MUST BE POWERED OFF AT ALL TIMES (since the device otherwise could transmit signals that might interfere with such equipment). In addition, under no circumstances should the MBR1400 device be used in any aircraft, regardless of whether the aircraft is on the ground or in flight. In any aircraft, the MBR1400 device MUST BE POWERED OFF AT ALL TIMES (since the device otherwise could transmit signals that might interfere with various onboard systems on such aircraft). Furthermore , under no circumstances should the MBR1400 device be used by the driver or operator of any vehicle. Such use of the device will detract from the driver or operator’s control of that vehicle. In some j urisdictions, use of the MBR1400 device while driving o r operating a vehicle constitutes a civil and/or criminal offense. Due to the nature of wireless communications, transmission and reception of data by the MBR1400 device can never be guaranteed, and it is possible that data communicated or transmitted wir elessly may be delayed, corrupted (i.e., contain errors), or totally lost. The MBR1400 device is not intended for, and Cradlepoint recommends the device not be used in any critical applications where failure to transmit or receive data could result in prop erty damage or loss or personal injury of any kind (including death) to the user or to any other party. Cradlepoint expressly disclaims liability for damages of any kind resulting from: (a) delays, errors, or losses of any data transmitted o r received usin g the device; or (b) any failure of the device to transmit or receive such data. Warning: This product is only to be installed by qualified personnel! To comply with FCC/IC regulations limiting both maximum RF output power and human exposure to RF radiat ion, the maximum antenna gain must not exceed 5 dBi in the Cellular band and 4 dBi in the PCS band. ANTENNA CONSIDERATIONS Although the antenna model(s) used with these devices meet(s) the Industry Canada Radio Frequency requirements, it is possibl e that the future customers may swap them for different ones without network providers knowledge and approval. Such customers must be made aware of, and follow, the Radio Frequency requirements applied in the Technical Approval: • RSS - 102 “Radio Frequency Exposu re Compliance of Radiocommunication Apparatus (All Frequency Bands)” • RSS - 12 9 “800 MH z Dual - Mode CDMA Cellular Telephones” • RSS - 132e “Cellular Telephones Employing New Technologies O perating in the Bands 824 - 849 MHz and 869 - 894 MH z” • RSS - 133 r1 “2 GHz P ersonal Communications Services” FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the F CC Rules. These limits are designed to p rovide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio f requency energy and, if not installed and used in accordance with the instructions, may cause harmful interferenc e to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If t his equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment of f and on, the user is encouraged to try to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver.

24. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 22 • USB/ExpressCard modem(s) • Integrated Cradlepoint business - grade modem 3.2 Connect to a Computer or other Device 3.2.1 Wireless Network Connection 1) Find the network. On a Wi Fi - enabled computer or device, open the window or dropdown menu that allows you to access wireless networks. The MBR14 00 SSID will appear on the list: s elect this network. 2) Log in. Input the Default P assword when prompted. The Default P assword is provi ded on the product label found on the bottom of your router (this password is also the last eight digits of the router’s MAC address, which can be found on the product box or product label). NOTE : If more than one MBR14 00 wire less router is visible, find the correct unit by checking for its SSID (service set identifier; the unique name of the local network) . The SSID can be found on the product label in the form MBR14 00 - xxx, where “xxx” is the last 3 digits of the router’s MAC address.

31. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 29 4 WEB INTERF ACE – ESSENTIALS The MBR 14 00 has a browser - based interface for configuration and administration of all features. T he interface is organized with 5 tabs at the top of the screen : • Getting Started • Status • Network Settings • Internet • System Settings Web Interface – Essentials contains the following sections to help you more quickly and eas il y navigate the se administration pages: 4.1 Administrator Login 4.2 Getting Started – First Time Setup Wizard 4.3 Quick Links 4.4 Configuration Pages 4.5 Enterprise Cloud Manager Registration 4.6 IP Passthrough Setup

100. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 98 6.5.2 MAC Logging Configuration Enable MAC Logging : Enabling MAC Logging will cause the router to log MAC addresses that are connected to the router. MAC addresses that you do not want to have logged (addresses that you expect to be connected) shou ld be added to the “Ignored MAC A ddresses ” list. You can configure the router to send an alert i f a connected device has a MAC address that the router doesn’t recognize. Go to System Settings → Device Alerts to set up these email alerts. Ignored MAC Addresses : This is the list of MAC addresses that will no t produce an alert or a log entry when they are connected to the router. These should be MAC addresses that you expect to be connected to the router. To add MAC addresses to this list, simply select devices shown in the MAC Address Log and click “Ignore.” You can also add addresses manually. MAC Address Log : This shows the last 64 MAC addresses that have connected to the router , as well as which interface was used to connect. The time/date that is logged is the time of the first connection. The page may ne ed to be refreshed to show the most recent log entries. Double - clicking on entries from this list will add them to the Ignored MAC Addresses list.

137. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 135 6.9 WiPipe QoS When WiPipe QoS (Qual ity of Service, also known as “ Traffic Shaping ” ) is enabled, the router will control the flow of Internet traffi c according to the user - defined rules. In other words, Traffic Shaping improves performance by allowing the user to prioritize applications. Enable WiPipe QoS: Click on this box to open options for controlling Internet traffic. You can assign maximum Upload S peed and Download Speed values and define your own Traffic Shaping rules . Upload Speed and Download Speed : Setting the Upload Speed and Download Speed is required to control traffic flow accurately. Adjust the sliding bar to restrict the maximum upload and/or download speed for the Internet source(s) you are using. For example, y ou might restrict the upload speed to prioritize available bandwidth for download o r to reduce overall bandwidth use in order to lower costs . It is r ecommended that you experiment with differ ent values for your particular Internet connection for best results. NOTE: Upload speed is the speed at which data can be transferred to your ISP. Download speed is the speed at which data can be transferred to you from your ISP . You can test your connection speed s with a service such as speedtest.net .

249. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 247 8.8 System Control Restore to Factory Defaults: This changes all settings back to their default values. Reboot The Device: T his causes the router to restart. Scheduled Reboot: This causes the router to restart at a user - determined time. Watchdog Reboot: This causes the router to automatically restart when it determines an unr ecoverable error condition has occurred. Ping Test: A simple test to check Internet connectivity. Type the Hostname or IP address of the computer you want to ping and press 'Enter' or click the 'Ping' button. Advanced: System Automatic Reboot and Ping Test

131. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 129 Ethernet Port Group Editor A Port Group represents a logical grouping of Ethernet ports. Any computers physically connected to ports in a group will be allowed to freely communicate with each other. For example, if you leave all four orange ports set as LAN ports, you might group Orange Port 1 and Orange Port 2 together to be part of your primary network , and then group Orange Port 3 and Orange P ort 4 together to be part of a guest network. NOTE: When a port group uses the LAN mode you must separately ensure that this logical interface is attached to a Local IP Network in the top panel of this page. Port Group ID: The Group ID field provides a r eference to this grouping of ports to be used in other parts of the router configuration. For example, this ID is referenced in the Local IP Networks configuration to attach this logical group of Ethernet ports with a network configuration. Use a simple sh ort text phrase to describe this group, such as "main", "guestports", "backup_wan", etc. Select one or more ports to create a port group that you can subsequently attach to a network in the Local Network Editor . Double - click on any of the Ethernet ports s hown on the left in the Available section to move them to the Selected section on the right (or highlight a port and click the + button). To deselect an Ethernet port, double - click on an interface in the Selected section (or highlight the port and click th e – button).

174. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 172 7.4 Data Usage Data Usage Management & Alerts allows you to create and manage rules that he lp control the data usage of a m odem. If you have a limited data plan or a p rice increase on your plan after a certain amount of usage , a Data Usage Rule can help you track these amounts. You can set a rule to shut down use of a modem and/or send a message when you reach a data usage amount you set. Enable Data Usage: (Default: Disabled.) When you select Enabl e Data Usage , you will see the Data Usage Agreement shown to the right. The purpose of this agreement is to ensure that you understand that the data numbers for your router might not perfectly match those of your carrier: Cradlepoint cannot be held responsible. You must accept the agreement by click ing Yes in order to begin creating data usage rules. Warning: You should set yo ur data limits lower than your carrier data a llowance a nd regularly compare the numbers provided by the router with the numbers from your ca rrier.

40. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 38 4.3 Quick Links The Cradlepoint logo in the upper left - hand corner of all the administration pages is a link to the Dashboard ( Status → Dashboard ) , which displays fundamental information about th e router. The black bar across the top provides quick access to important information and controls. Internet Connection This link s to Status → Internet Connection s where you can view in - depth information about your Internet sources . Click on this green dot to link to Internet → Connection Manager where you can manage your WAN interfaces. Click on the image of four signal bars to open a “Modem Connection Quality” popup window that shows the strength of your Internet signal.

118. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 116 Access Control : Tune the access control settings of this network to match the intended use. Simply select or deselect any of the following: • LAN Isolation: When checked, this network will NOT be allowed to communicate with other local networks. • UPnP Gateway: Select the UPnP (Universal Plug and Play) option if you want to enable the UPnP Gateway se rvice for computers on this network. • Admin Access: When enabled, users may access these administration pages on this network.

248. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 246 Trap community string: The trap notifications will be returned to th e trap server using this SNMPv1 trap community name . Address for trap server: Enter the address of the host system that you want trap alerts sent to. Trap server port #: Enter the port number that the remote host will be listening for trap alerts on. (Default: 162) 8.7.2 System Information System information via SNMP is Read - Writable by default. However, if a value is set here, that field will become Read - Only. System Contact : Input the email address of the system administrator. System Name : Input the router’s hostname. System Location : Input the physical location of the router. This is simply a string for your own information.

53. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 51 To configure WiFi network settings see Network Settings → WiFi / Local Network s . 5.3.1 Router Alerts On the right side of the Dashboard page is a brief set of “ Router Alerts ” that state basic information such as whether the router is running properly. This will inform you about the availability of new firmware, for example. Router Alerts includes links to the System Software page (for new firmware) and the Connection Manager .

27. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 25 3.3 Co mmon Problems This section contains some of the most common is sues faced by users of the MBR14 00. Please visit the Cradlepoint Knowledge B ase at http://knowledgebase. Cradlepoint .com/ for more help and answers to your other questions. 3.3.1 You cannot c onnect to the Internet with a Cradlepoint business - grade m odem Make sure that you have an active data plan and that your modem has been activated. A wireless broadband data plan must be added to your business - grade m odem . Wireless broadband data plans are a vailable from w ireless carriers such as Verizon , AT&T, and Sprint . A new line of service can be added or a data plan can be transferred from an existing account. You will need the ESN number (or SIM/IMEI number depending on your carrier plan) from the product label on your modem to add or transfer a line of service. After adding a data plan to the modem, you may need to activate the modem: 1. L og in to the MBR1400 administration pages (see Accessing the Administration Pages ). 2. S elect Internet from the top navigation bar and Modem Settings from the drop down menu ( Internet → Modem Settings ). 3. F ind and s elect the Cradlepoint modem. 4. Click Update/Activate. 5. Cl ick Activate in the popup. Finally, if you have an active data plan and you have already activated your modem, you may be out of range of your service provider. Check your signal strength in the Internet section of the Dashboard ( Status → Dashboard) . If you have a weak signal in your location, contact your service provider. If you are still not online after activating the modem , go to knowledgebase. Cradlepoint .com for more information .

57. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 55 5.7 Internet Connections The Internet Connect ions submenu option provides a list of attached WAN devices used as the Internet source for the MBR1400 . Select one of these devices to see detailed inform ation about that particular device. For each type of device, different information will be included in the Device Information section. Possible devices include: • Ethernet • LTE Modem • HSPA+ Modem • WiMAX Modem • GSM Modem • EVDO Modem • WiFi as WAN Depending on the device, possible information will be in the following sections: Diagnostics, General Information, IP Information, and Statistics. For modems, the Diagnostics section provides specific information about how the modem is communicating with its carrier.

229. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 227 This command returns info about the router along with the port names for ports with attached modems. These port names may be helpful for using the commands that follow. Example of response: uptime: 0:35:13 FW: v4.4.0 eth0: 10/100/1000 Ethernet Switch: connected usb3: MC200P: connected mstatus : Get modem status* • Syntax: <password>,mstatus,[port , ] • Example: 1234,mstatus, //return status of highest priority modem • Example: 1234,mstatus,usb1, //return status of modem plugged into port usb1 This command returns info about the indicated modem’s status. The resulting data reflects the modem model number, service type, and connection status and values. Example of response: Model: MC200P Service: HSPA+ SIM Status: READY RSSI: - 62 dbm ECIO: - 4 APN: wwan.ccs IP Addr: 166.136.1 42.172 mreboot : Reboot the modem* • Syntax: <password>,mreboot,[port , ] • Example: 1234,mreboot, //This will reboot the highest priority modem. • Example: 1234,mreboot,usb1, //This will reboot the modem on port usb1

250. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 248 8.9 System Software 8.9.1 Firmware Upgrade This allows the administrator to load new firmware onto the router to add new features or fix defects. If you are happy with the operation of the router, you may not want to upgrade just because a new version is available. Check the firmware release notes ( www. Cradlepoint .com/firmware ) for information to decide if you should upgrade . Current Firmware Version: Shows the number of the current firmware and the date it was updated. Available Firmware Version: If th ere is a new firmware version available, this will list the version number. Click “Check Again” to have the router check the newest firmware. Factory Reset: Set default settings to match the new firmware. This is safest, as settings may have changed. You s hould back up your current settings and restore them after the new firmware is loaded. Automatically check for new firmware: Check for an available firmware update once a day. Automatic ( Internet ): Have the router download the file and perform the upg rade with no user interaction. Manual Firmware Upload: Upload the router firmw are from an attached computer. (Go to www. Cradlepoint .com/firmware to download the firmware.)

62. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 60 IP Information • DNS Servers • IP Address • Gateway Statistics • Incoming Bytes • Outgoing Bytes • Connection Uptime (secs)

233. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 231 8.1.9 Router Services By default, router se rvices (Enterprise Cloud Manager, NTP, etc.) connect to the router via the WAN. In some setups it makes sense to use the LAN instead. For example, if your router is used strictly for 3G/4G failover behind another router, you may not want to use 3G/4G data unnecessarily. Select Use LAN Gateway to set your router services to connect via the LAN. LAN Gateway Address : Input the IP address of the LAN side connection. If this is a 3G/4G failover router operating behind another router, the LAN Gateway Address is t he IP address of that other router. DNS Server and Secondary DNS Server : The primary and secondary DNS server numbers match the static DNS values (set at Network Settings → DNS ). You can leave the default values or set them manually here. (Changing these v alues also changes the static DNS values.)

78. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 76 6 NETWORK SETTINGS The Network Settings t ab p rovides access t o these submenu options for administering the following functions/tasks , which all relate to managing the LAN (Local Area Network s ) . • Content Filtering • DHCP Server • DNS • Firewall • MAC Filter / Logging • Routing • Routing Protocols • WiFi / Local Network s • WiPipe QoS

107. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 105 6.7.4 RIPNG Routing RIP (Routing Information Protocol) RIPng (RIP next generation) extends RIPv2 to support IPv6. See RIPng on Wikipedia and RFC 2080 for details. RIPNG Editor • Name : Unique name of the policy. • Metric : RIPng metric is a value for distance for the network. Usually RIP increments the metric when the network information is received. The metric for redistributed routes is set to 1. • Enabled : Click to enable/disable the policy. (Default: enabled.) Networks : Set the RIP ng - enabled interfaces by n etwork using IPv6 addresses . RIP ng is enabled on the interfaces that have addresses within the network range.

268. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 266 • Connect the equipment into an outlet on a ci rcuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user ’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received , including interference that may cause undesired operation. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possibl e. This device and its antenna(s) must not be co - located or operation in conjunction with any other antenna or transmitter. IMPORTANT NOTE FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled en vironment. This equipment should be installed and o perated with minimum distance 20cm between the radiator & your body. OPEN SOURCE SOFTWARE This product contains software distributed under one or more of the following open source licenses: GNU General Public Licens e Version 2, NetBSD Foundation License, and PSF License Agreement for Python 3.1.1. For more information on this software, including licensing terms and your rights to acces s source code, contact Cradlepoint at www. Cradlepoint .com/opensou rce . WARRANTY INFORMATION Limited 1 Year Warranty included featuring 5x12 technical support + access to software updates + hardware repair or replacement . Optional Enterprise Support Agreement available with 24x7 technical support + software updates and upgrades + advanced hardware exchange . Cradlepoint , Inc. warrants this product against defects in materials and workmanship to the original purchaser (or the first purchaser i n the case of resale by an authorized distributor) for a period of one (1) year from the date of shipment. This warranty is limited to a repair or replacement of the product, at Cradlepoint ’s discretion. Cradlepoint does not warrant that the operation of the device will meet your requirements or be error free. Within thirty (30) days of receipt should the product fail for any reason ot her than damage due to customer negligence, purchaser may return the product to the point of purchase for a full refund of the purchase price. If the purchaser wishes to upgrade or convert to another Cradlepoint , Inc. product within the thirty (30) day period, purchaser may return the product and apply the full purchase price toward the purc hase of another Cradlepoint product. Any other return will be subject to Cradlepoint , Inc.’s existing return policy. LIMITATION OF CRADLEPOINT LIABILITY The information contained in this Quick Start Guide is subject to change without notice and does not represent any commitment on the part of Cradlepoint or its affiliates. CRADLEPOINT AND ITS AFFILIATES HEREBY SPECIFIC ALLY DISCLAIM LIABILITY FOR ANY AND ALL: (A) DIRECT, INDIRECT, SPECIAL, GENERAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR EXEMPLARY DAMAGES, INCLUDING WITHOUT LIMITATION FOR LOSS OF PROFITS OR REVENUE OR OF ANTICIPATED P ROFITS OR REVENUE ARISING OUT OF THE U SE OR INABILITY TO USE THE MBR1400 DEVICE, EVEN IF CRADLEPOINT AND/OR ITS AFFILIATES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND EVEN IF SUCH DAMAGES ARE FORESEEABLE; OR (B) CLAIMS BY ANY THIRD PARTY. Notwithstanding the foregoing, in no even t shall the aggregate liability of Cradlepoint and/or its affiliates arising under or in connection with the MBR1400 device, regardless of the number of events, occurrences, or claims giving rise to liability, exceed the price paid by the original purchase r of the MBR1400 device. PRIVACY Cradlepoint may collect general data pertaining to the use of Cradlepoint products via the Internet including, by way of example, IP address, device ID, operating system, browser type and version number, etc. To review Cradlepoint ’s privacy policy, please visit: http://www. Cradlepoint .com/privacy .

114. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 112 6.8.2 Local Network Editor Click Add or select a network and click Edit to open the Local Network Editor to make configure a LAN. The Local Network Editor contains the following tabs: General Settings, IPv4 Settings, IPv6 Settings, Interfaces, Access Control, IPv4 DHCP, IPv6 Addressing, Multicast Proxy, Schedule, VRRP, STP, and Wired 802.1X. General Settings : Enabled: Push to manually disable a network. Also, some settings could cause a network to be automatically disabled: click here to re - enable the network. Nam e: This primarily helps to identify this network during other administration tasks. Hostname: [Default: cp (for Cradlepoint )] The hostname is the DNS name associated with the router's local area network IP address. NOTE: You can access the router’s admini stration pages by typing the hostname into your browser, so if you change “cp” to another hostname, you can access the administration pages through the new hostname.

127. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 125 6.8.3 Local Network Interfaces Each LAN type — WiFi, Ethernet, and VLAN — has a separate section with configuration options. Unless the default configuration is sufficient, YOU MUST CONFIGURE EACH INTERFACE SEPARATELY in order to create the desired interface options for a network. You can then select these interfaces to add to a network in the Local Network Editor (see above). Select from the following tabs: • Wireless (WiFi) Network Settings • Ethernet Port Configuration • VLAN Interfaces Wireless (WiFi) Network Settings The MBR1400 can broadcast as many as four SSIDs (service set identifiers – the names for WiFi networks ) . One primary WiFi network is enabled by default, while you may have enabled a second guest network when usi ng the First Time Setup Wizard. You have the ability to change the settings for either of these networks and/or enable two additional networks. Wireless R adio: Enable/Disable. (Default: Enabled). Leave enabled unless you don’t want any WiFi networks broadcast from your router. Select a WiFi network and click Edit to change the settings.

79. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 77 6.1 Content Filtering You have two main options for filtering content in a network created by your MBR1400. 1) Web Filter Rules: C reate a list of websites that will be either disallowed or allowed. Customize the filter settings for each network and/or each MAC address . (These rules will not block HTTPS websites.) 2) Cloud Based Filtering /Security : A llows seve ral options for filtering and security using third - party services: • Umbrella by OpenDNS • Zscaler 6.1.1 Network Web Filter Rules Network Web Filter Rules allow you to control access from your network to external domain s or website s . Rules are assigned to a specific LAN network (or all networks) . T he highest priority rule will have precedence when there is a conflict. Addresses can be added by UR L/Domain na me or by IP address. Exceptions to existing rules can be created by adding another rule with higher priority. For example, if access to espn.go.com is desired but go .com is blocked with a priority of 50, the addition of an “A llow ” rule for espn.go .com with a priority of 51 or greater will allow access. When creating rules keep in mind that some sites use multiple domains, so each domain may need a rule added to produce the desired behavior. NOTE : Websites that use HTTPS will not be blocked by thes e rules. You will need to use OpenDNS to block HTTPS websites.

87. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 85 6.2 DHCP Server DHCP stands for Dynamic Host Configuration Protocol. The built - in DHCP s erver automatically assign s IP addresses to the computers and other devices on each local area network (LAN). In this section you can view a list of assigned IP addresses and reserve IP addresses for particular devices. Active Leases: A list of devices that have been provided DHCP leases. The DHCP s erver automatically assigns these leases. This list will not include any devices that have static IP addresses on the network. Select a device and click Reserve to add the device and its IP address to the list of Reservations . Reservations: This is a list of devices with reserve d IP addresses. This reservation is almost the same as when a device has a static IP address except that the device must still request an IP address from the router. The router will provide the device the same IP address every time. DHCP r eservations are helpful for server computers on the l ocal network that are hosting applications such as Web and FTP. Servers on your network should either use a static IP address or a reservation. While you have the option to manually input the information to reserve an IP address (Hostname, Hardware Addr, IP Addr) , it is much simpler to select a device under the Active Leases section and click “ Reserve .” The selected device ’s information will automatically be added under Reservations .

177. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 175 7.4.2 Template Configuration Templates allow you to control multiple WAN devices with the same ru le. Each WAN device that matches a template will automatically have its own rule created. For example, you can set a template rule for all mobile data modems that causes your router to send an alert after 1000 MB of usage in a month . When you attach a new 4G USB modem, your template will immediately create a new Data Usage Rule for the attached modem that sends the alert as specified. Click Add to configure a new Template rule. Create a Template Name that you can recognize. The template will apply to one of the following WAN types : • All WAN • All Ethernet • All Modems Select one of these types . The rest of the rule settings options match those in the Data Usage Rules . See the section above for additional information about how to configure your template usage rules.

178. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 176 7.5 GRE Tunnel s Generic Routing Encapsulation (GRE) tunnels can be used to create a connection between two private networks. The MBR1400 is enabled for either GRE or VPN tunnels. GRE tunnels are simpler to configure and more flexible for different kinds of packet exchanges, but VPN tunnels are much more secure. In order to set up a tunnel you must know the following: • Local Network and Remote Network addresses for the “ Glue Network ,” the network that is created by the administrator that serves as the “glue” between the networks of the tunnel. Each address must be a different IP address from the same private network , and these addresses together form the endpoints of the tunnel. • Remote Gateway , the public facing WAN IP address that the local gateway is going to connect to. • Optionally, you might also want to enable the tunnel Keep Alive feature to monitor the status of a tunnel and more accurately determine if the tunnel is alive or not. Click Add to configure a new G RE tunnel.

228. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 226 SMS Commands Below is a list of supported SMS messages and the syntax format. Due to security concerns, the set of commands are intentionally limited to t hose that can configure a modem’s connection , but cannot lock the administrator out due to malicious modem ch anges. Therefore, if an unsolicited request adjusts the modem’s configuration via SMS, an administrator can still access the modem via SMS. Comman d syntax: <password>,<comman d> ,[arg1,][arg2,] All commands start with the password – either the default of the last 8 digits of the router's MAC address or the administrator - configured password. Commands can have an optional number of arguments. NOTE: The trailing comma on the command is important to allow the SMS engine to distinguish the final argument from other info rmation the SMS client might append to the message without your knowledge . Supported Commands : reboot : Reboot the router (not the modem) • Syntax: <password>,reboot, • Example: 1234,reboot, restore : Restore the router to factory defaults • Syntax: <password>,restore, • Example: 1234,restore, rstatus : Get router status • Syntax: <password>,rstatus, • Example: 1234,rstatus,

246. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 244 8.7 SNMP Configuration SNMP, or Simple Network Management Protocol, is an Internet standard protocol for remote management. You might use this instead of Enterprise if you want to remotely manage a set of routers that include both Cradlepoint and non - Cradlepoint products. Enable SNMP: Selecting “Enable SNMP” will reveal the router’s SNMP configuration options. Enable SNMP on LAN: Enabling SNMP on LAN will make SNMP services available on the LAN networks provided by this router. SNMP will not be available on g uest or virtual networks that do not have administrative access. LAN port #: Use the LAN port # field to configure the LAN port number you wish to access SNMP services on. (Default: 161) Enable SNMP on WAN: Enabling SNMP on WAN will make SNMP services available to the WAN interfaces of the router. WAN port #: Use the WAN port # field to configure which publicly accessible port you wish to make SNMP services available on. (Default: 161) SNMPv1: SNMP version 1 is the most basic version of SNMP. SNMPv1 wil l configure the router to transmit with settings compatible with SNMP version 1 protocols. SNMPv2 c : SNMP version 2c has the same features as v1 with some additional commands. SNMPv2c will configure the router to use settings and data formatting compatible with SNMP version 2c.

25. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 23 3.2.2 Accessi ng the Administration Pages For many users, the MBR1400 can be used immediately without any specia l configuration changes. If you woul d like to change your network name or password or configure any of the advanced features of the MBR1400, you will need to log in to the administration p ages : • Access your router ’s Administrator Login screen by o pen i ng a w eb browser window and typing “ cp/ ” (your router’s default hostname) or the IP address “ 192.168.0.1 ” into the address bar. • Enter your Default Password . Th is password can be found on the bottom of the MBR14 00 . Then click the L OGIN button . • When you log in for the first time, the First Time Setup Wizard automatically appears. Follow the instructions given with the Wizard or see Getting Started – First Time Setup for more information about using the First Time Setup Wizard .

155. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 153 6to4 Tunnel Out of the box, 6to4 is the simplest mode to enable full end - to - end IPv6 connectivity in an organization if the upstream ISP properly routes packets to and from the 6to4 unicast relay servers. • Primary IPv6 DNS Server – (optional) Depending on your p rovider, this may be required . This o nly takes effect if the default global DNS setting on the Network Settings → DNS page is "Automatic". • Additional IPv6 DNS Server – Secondary DNS server. • Delegated IPv6 Network – (optional) Network available for delegat ion to LANs. Depending on your provider, this may be required . Prefixes specified here only take effect if those supplied by the connection are insufficient to configure your LANs. • Delegated IPv6 Network – Additional network available for delegation to LAN s . Example Configuration:

140. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 138 Download Priority: The priority value has two different effects on traffic. Higher priority traffic is handled before lower priority traffic, which can lead to shorter response times. Also, when spare bandwidth is available it is offered to higher priority queues first. Move the slider to select from the following options (Default: Normal): • Lowest • Lower • Below Normal • Normal • Above Normal • High • Higher • Highest DSCP (DiffServ) Tag: Differentiated Services Code Point (DSCP) is the successor to TOS (Type of Service). Use this field to 'tag' the traffic by putting the value in the DSCP header of each IP packet that flows through this queue. Use the value of '0' to clear the existing DSCP value in the packet header. DSCP Tagging is sometimes used so that other networking equipment, upstream or post - NAT, can do traffic shaping based on the DSCP Tags as opposed to IP addresses or ports. This setting is optional. For more information see the Differentiated services Wikipedia page. Click Finish to save this queue .

156. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 154 6in4 Tunnel The 6in4 tunnel mode utilizes explicit IPv4 tunnel endpoints and encapsulates IPv6 packets using 41 as the specified protocol type in the IP header. A 6in4 tunnel broker provides a static IPv4 server endpoint, deca psulates packets and provides routing for both egress and ingress IPv6 packets. Most tunnel brokers provide a facility to request delegated networks for use through the tunnel. • Primary IPv6 DNS Server – (optional) Depending on your provider, this may be re quired . This o nly takes effect if the default global DNS setting on the Network Settings → DNS page is "Automatic". • Additional IPv6 DNS Server – Secondary DNS server. • Delegated IPv6 Network – (optional) Network available for delegation to LANs. Depending on your provider, this may be required . Prefixes specified here only take effect if those supplied by the connection are insufficient to configure your LANs. • Delegated IPv6 Network – Additional network available for delegation to LANs . Example Configuration:

84. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 82 6.1.5 Cloud Based Filtering/Security Select a third - party Cloud Provider from the dropdown list. • Umbrella by OpenDNS • Zscaler Umbrella by OpenDNS Umbrella by OpenDNS is a cloud - based web filtering and security solution that protects you online by filtering websites . Go to http://www.opendns.com/business - security/ for information about Umbrella. Enter your Umbrella account information in order to use these content filtering settings. Force All DNS Requests To Router : Enabling this will redirect all DNS requests from LAN clients to the router's DNS server. This will allow the router even more control over IP Addresses even when the client might have their own DNS servers statically set. OpenDNS ISP Filter Bypass Algorithm: It is possible that your Internet Service Provider (ISP) uses the port that OpenDNS is configured to access, port 53, which will prevent OpenDNS filtering. If OpenDNS does not appear to be working correctly, enabling this will attempt to bypass those ports when using an OpenDNS content filtering level.

124. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 122 VRRP : NOTE: VRRP require s a feature license. Go to System S ettings → Feature Licenses to enable this feature . VRRP also requires hardware version 2.0. VRRP (Virtual Router Redundancy Protocol) allows you to associate multiple routers with one LAN so that if the primary physical router fails, the LAN will keep the same settings via the virtual router. Enable VRRP: Select to enable VRRP configuration options. Virtual Router IP: IP address of the virtual router. This must be distinct from the IP address of any physical router associated with the virtual router. Virtual Router ID: Identifying number of the virtual router. (Range: 1 - 255) Router Priority: Failover priority level of this physical rout er. The physical router with the highest priority number will have primary ownership of the virtual router. (Range: 1 - 254) WAN Fault Priority: This optional value sets the failover priority of this router when no WAN connection is available. If the value matches the normal router priority, WAN connection state will not be considered. If the value is empty (the default), the router will always give up ownership of the virtual IP and let a new master take over when no WAN connection is available. Advertiseme nt Interval: Sets the amount of time (in seconds) between VRRP advertisements, which communicate the router status. The default of 1 second is standard.

6. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 4 1.3 MBR14 00 Overview Cradlepoint 's Mission - Critical Broadband Router (MBR1400) takes the power and flexibility of our industry leading router, and when combined with an active high - speed wireless broadband data connection, gets your busi ness network online in no time. Cradlepoint ’s ARC Series includ es an integrated 3G/4G business - grade modem, a seamless, worry - free solution to keep your business online. Designed for small business, branch office, and retail locations – our business series router provides a secure prima ry or bac kup connection to the Internet. In addition to connection options for traditional w ired networking solutions like c able, DSL, s atellite, or T1, the most powerful feature of the MBR1400 is its ability to use Cradlepoint business - grade m odems or USB or Expre ssCard data m odems to create instant networks anywhere you receive a broadband signal. The MBR1400 features failover/failback, secure VPN, multiple encryption modes for maximum security, dual - band WiFi broadcast, pr ivate and public networks, WiFi as WAN, Modem Health Management, and remote management options with Cradlepoint Enterprise Cloud Manager for deployed units. Cradlepoint provides enterprise - grade performance, security , and the modem reliability businesses need to ensure continuous uptime. Create an instant network today with LTE, WiMAX, HSPA+, or any other wireless broadband technology. ENTERPRISE PERFORMANCE • Targeted for retail locations, branch offices, or small and medium - sized businesses • Choose the ARC MBR1400 Series to include an integrated Cradlepoint business - g rade modem • Centralize the administration and monitoring of distributed routers u sing cloud - based WiPipe Central • Load balance multiple data sources (data modems, wired data services , and WiFi as WAN ) • Compatible with Cisco, Juniper, and other industry - leading network hardware providers ENHANCED WIFI • Wireless “N” WiFi (802.11n, 802.11a + legacy 802.11b/g, 3x3 MIMO a ntenna system) • Enhanced performance around walls and other obstru ctions • Dual - b and WiFi broadcast – either 2.4 GHz or 5.0 GHz • Maximum security with both public and p rivate networks

76. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 74 5.11 VPN Tunnels View the status of configured VPN tunnels. To set up or edit a VPN tunnel , go to Internet → VPN Tunnels . Included information: • Name • Connections • Status • Protocols • Transferr ed • Direction • Time Online • Control

120. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 118 Custom Options: Input a custom DHCP option by first clicking the Custom Options field to enable it and then clicking “Add” at the top of the table that appears. There are close to 200 possible DHCP options available. One of the more common uses is to assign a VoIP phone server using option 66 (Server name). • Option: Select an option from the dropdown list or manually enter the number of an option. A complete list of options is available from IANA. • Value: Genera lly this field should be a string, IP address, or numeric value. Some fields can accept both IP addresses and hostnames – in these cases you may need to wrap this value in quotes. For example, option 66 (Server name) requires quotes around IP addresses. DH CP Relay : DHCP Relay communicates with a DHCP server and acts as a proxy for DHCP broadcast messages that must be routed to remote segments. This is accomplished by converting broadcast DHCP messages to unicast messages to communicate between clients and s ervers. DHCP Server Address : An optional DHCP server address if more than one DHCP server is located on the network. This field is only available when DHCP Relay is enabled.

207. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 205 Click “R efresh ” if a WiFi network to which you want to connect is in visible. Site S urvey only operates on the band — 2.4 GHz or 5.0 GHz — that is currently configure d in the WiFi advanced settings . In order to connect to networks in a different band , first switch the WiFi settings to that band ( Network Settings → WiFi / Local Network s in Advanced Mode ) . You have the option to manually add network profiles, but it is usually much easier to import them from Site Survey . Either click on Add under “ Saved Profiles ” or select a WiFi network in “ Site Survey ” and click Import . If you import a network from Site Survey , most of the information about the network will already be completed. You need to input the password (if there is one) and then c lick submit to save the WiFi as WAN profile.

217. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 215 • PAP • CHAP Server Address : This can be either an IP address in the form of "1.2.3.4", or a DNS name in form of "host.domain.com". Only lower case letters are allowed for a DNS name. Port : Port 49 is default for TACACS+. Shared Secret RADIUS RADIUS stands for “Remote Authentication Dial In User Service”. The router will use a RADIUS server (or two, optionally) to authorize administration. Server Timeout : If the servers are not reached within the set time (possibly because the WAN is down), the router will automatically fall back to using Local Users mode to prevent users from being locked out. Server Address : This can be either an IP address in the form of "1.2.3.4", or a DNS name in form of "host.domain.com". Only lower case letters are allowed for a DNS name. Port : Port 1812 is common for RADIUS servers. Shared Secret

219. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 217 8.1.3 Local Management Enable Internet Bounce Pages : Bounce pages show up in your web browser when the router is not connected to the Internet . They inform you that you are not connected and try to explain why. If you di sable bounce pages then you will just get the usual browser timeout. In the normal case when the router is connected to the Internet you don't see them at all. Disable Signal Strength Button : This disables the Signal Strength button on the physical router. Local Domain: The local domain is used as the suffix for DNS entries of local hosts. This is tied to the hostnames of DHCP clients as DHCP_HOSTNAME.LOCAL_DOMAIN. System Identifier: This is a customizable identity that will be used in router reporting and alerting. The default value is the MAC address of the router. Require HTTPS Connection: Check this box if you want to encrypt all router administration communication. Secure HTTPS Port: Enter the port number you want to use. The default is 443. Enable SSH Server : When the router's SSH server is enabled you may access the router's command line interface (CLI) using the standards - based SSH protocol. Use the username "admin" and the standard system password to log in. SSH Server Port : Default: 22.

42. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 40 4.4 Configuration Pages The following table shows the navigation layout of the administration pages. Click on the tabs along the top bar to reveal the following dropdown menus. Getting Started Status Network Settings Internet System Settings Enterprise Cloud Manager Registration First Time Setup IP Passthrough Setup WiFi Protected Setup Client List CP Connect Dashboard GPS GRE Tunnels Hotspot Clients Internet Connections Routing Statistics System Logs VPN Tunnels WiPipe QoS Content Filtering DHCP Server DNS Firewall MAC Filter / Logging Routing Routing Protocols WiFi / Local Networks WiPipe QoS Connection Manager CP Connect Client Data Usage Data Usage GRE Tunnels L2TP Tunnels Network Mobility (NEMO) NHRP Interfaces OpenVPN Tunnels VPN Tunnels WiFi as WAN / Bridge WAN Affinity / Load Balancing Administration Device Alerts Enterprise Cloud Manager Feature Licenses Hotspot Services Serial Redirector SNMP Configuration System Control System Software Status – Displays various types of information about your router such as a list of clients that are attached to your networks ( Client List ), the details of each Internet source your router is using ( Internet Connections ), and a map of your router’s location ( GPS ) . Very few changes can be made from this tab beca use the primary purpose is to display information .

184. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 182 7.7 Network Mobility (NEMO) NOTE: NEMO requires a feature license and hardware version 2.0. Go to Syst em Settings → Feature Licenses to enable this feature . Network Mobility (NEMO) is an Internet standards track protocol defined in RFC 5177 . The protocol allows session continuity for every node in a mobile network as the network moves. This is a licensable f eature. Without a valid license, settings can be configured, but will not be implemented. See System Settings → Feature Licenses for more information. NEMO requires a service provider, e.g. Verizon Wireless Private Network with DMNR (Dynamic Mobile Network Routing) . Your NEMO service provider will define many of the settings for your NEMO configuration. Once you have a NEMO service pr ovider and a valid feature license, add networks to the Networks Routed by NEMO section by first clicking Add . In the popup window, input: • Network Address • Netmask The Network Address and Netmask, or subnet mask, together define a range of IP addresses that comprise the local network you want associated with the NEMO settings . 7.7.1 Network Mobility (NEMO) Settings Home IP Address and Home Netmask – These may be provided by your NEMO service provider. The IP address is a placeholder, “dummy” address; any IP address can be used (1.2.3.4 is common) .

214. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 212 8 SYSTEM SETTINGS The System Settings tab has the following submenu items that provide access to tools for broad administrative control of the MBR1400 : • Administration • Device Alerts • Enterprise Cloud Manager • Feature Licenses • Hotspot Services • Serial Redirector • SNMP Configuration • System Control • System Software

179. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 177 Page 1: General Tunnel Name : Give the tunnel a name that uniquely identifies it . Tunnel Key : Enables an ID key for a GRE tunnel, which can be used as an identifier for mGRE (Multipoint GRE). Local Network : This is the local side of the “ Glue Network ,” a network created by the administrator to form the tunnel. The user creates the IP address inputted here. It must be different from the IP addresses of the networks it is gluing together. Choose any private IP address from the following three r anges that doesn’t match either network: • 10.0.0.0 - 10.255.255.255 • 172.16.0.0 - 172.31.255.255 • 192.168.0.0 - 192.168.255.255 Remote Network : This is the remote side of the “ Glue Network .” Again, the user must create an IP address that is distinct from the IP addresses of the networks that are being glued together. The Remote Network and Local Network values wil l be flipped when inputted for the other side of the tunnel configuration. Subnet Mask : This is the subnet mask for the Glue Network. The Local and Remote Network addresses must fit with this mask. 255.255.255.0 is a logical choice for most users. Remote Gateway : This is the public facing, WAN - side IP address of the network that the local gateway is going to connect to.

75. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 73 5.10 System Logs The router automatically logs (records) events of possible interest in its internal memory. If there is not enough inter nal memory for all events, logs of older events are deleted, but logs of the latest events are retained. The log options allow you to filter the router logs so you can easily find relevant messages. This router also has external Syslog Server support so yo u can send the log files to a computer on your network that is running a Syslog utility. Auto Update : The logs automatically refresh whenever the router creates a new message. Update: Click to check for new router messages. Clear L og : Clear the log file. Save L og : This will open a dialog in your browser that will allow you to save the router's log to your computer. Search: Enter keywords to find specific events. Level: Select/Deselect from the following levels to filter messages by priority. • Critical • Er ror • Warning • Info NOTE : The logs are erased whenever the router is rebooted or loses power.

92. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 90 • Local Port(s): The port number( s) that correspond s to the service (Web server, FTP, etc) on a local computer or device . For example, you might input “80” in the Local Port(s) field to open a port for a Web server on a computer within your network. The Internet Port(s) field could then also be 80, or you could choose another port numbe r that will be used across the Internet to access you r Web server. If you choose a number other than 80 for the Internet Port , connections to that number will be mapped to 80 — and therefore the Web server — within your network. • Protocol: Select from the following options in the dropdown menu : o TCP o UDP o TCP & UDP • Click Submit to save your completed port forwarding rule.

103. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 101 any arbitrary 32bit number. However it MUST be unique within the entire BGP domain to the BGP speaker - bad things will happen if mul tiple BGP speakers are configured with the same router - ID. • Enabled : Click to enable/disable the policy. (Default: enabled.) Networks Associated with ASN : Use the IP address and netmask to assign networks to this ASN. Neighbor Options : Creates a new neighb or identified by remote ASN and IP address. Redistribute Routes : Redistribute routes of the specified protocol or kind into BGP, with the metric type and metric set if specified, filtering the routes using the given route map if specified. Redistribut ed routes may also be filtered with distribute lists. • Type : The type is the source of the route. Select from: Main, Connected, Static, RIP, and OSPF . • Metric: Numerical priority of the route. • Route Map : Route maps provide a means to filter and/or apply acti ons to routes, allowing policies to be applied to routes.

104. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 102 6.7.2 OSPF Routing OSPF (Open Shortest Path First) version 2 is a routing protocol described in RFC2328, OSPF Version 2. OSPF is an IGP (Interior Gateway Protocol). Compared with RIP, OSPF can provide more scalable network support and faster convergence times. OSPF is widely used in large networks such as ISP (Internet Service Provider) backbone and enterprise networks. OSPF Editor • Name : Unique name of the policy. • Router ID : This sets the router - ID of the OSPF process. The router - ID may be an IP address of the router, but need not be – it can be any arbitrary 32bit number. However it MUST be unique within the entire OSPF domain to the OSPF speaker - bad things will happen if multiple OSPF speakers ar e configured with the same router - ID. • Authentication Key : Set OSPF authentication key to a simple password. After setting authentication key, all OSPF packets are authenticated. The authentication key has a maximum length of eight characters. • Enabled : Clic k to enable/disable the policy. (Default: enabled.) Network Areas : Areas are identified by an ID number. As of 4.1.1, Cradlepoint only supports area 0. Use the IP address and netmask fields to associate a network with this policy. Also, choose whether to select Passive (active by default). Passive areas do not advertise.

121. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 119 IPv6 Addressing : Address Configuration Mode: SLAAC Only – SLAAC stands for s tateless address autoconfiguration. The router regularly generates a router advertisement that includes network prefix and routing information, allowing clients to autogenerate an address and start communicating on the network. Clients utilize neighbor discovery protocols to ensure multiple clients on the subnet have not chosen an identical address. SLAAC with DHCP – (Default) IPv6 DHCP provides an additional client configuration method and is regu larly combined with SLAAC to provide DNS servers (a shortcoming in the original SLAAC specification) and additional options not supported by SLAAC. By defaulting to SLAAC with DHCPv6, all IPv6 - capable clients on the network should be configurable with IPv6 connectivity. • DHCP Range Start: T he beginning of the range that will be used for IPV6 DHCP addresses. The IPv6 range will always start at 1. • DHCP Range End: The ending IP address in the DHCP Server range is the end of the reserved pool of IP addresses th at will be given to any DHCP - enabled computers on your network. • IPv6 DHCP Lease Time: This specifies how long DHCP - enabled computers will wait before requesting a new DHCP lease. Disable SLAAC and DHCP – Disable both IPv6 address configuration modes.

270. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 268 10.2 Specifications MODEL NAME MBR14 00 Mission - Critical Broadband Router WAN / INTERNET 3G/4G via five modem p orts (3 USB 2.0, 2 ExpressCard); one default Ethernet p ort (10/100/1000); additional LAN Ethernet p ort s re - configurable to WAN for redundancy LAN Wi - Fi 802.11 a/b/g/n, four default Ethernet p orts (10/100/1000) ; one additional WAN Ethernet p ort re - configurable to L AN use ANTENNAS 3 ex ternal 2 .4 GHz Wi - Fi antennas ; 5 GHz antennas available as an accessory BUTTONS / SWITCHES Wi - Fi On/Off Switch, WPS Button (Wi - Fi Protected Setup), Modem Signal Strength, Reset, and Power Switch LED INDICATORS Power, Ethernet LAN (1 - 4), Ethernet WAN, 3G/4G WAN, 3G/4G Modem Status (5), WPS (Wi - Fi Pro tected Setup), Signal Strength DIMENSIONS 9” x 5.1” x 1.57” ( 230mm x 130mm x 40mm ) CERTIFICATIONS FCC, IC, CE, Wi - Fi Alliance OPERATING TEMPERATURE 0 o C to 4 0 o C

14. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 12 MBR1400W 4G WiMAX for Sprint or CLEAR Technology : WiMAX 802.16e Wave 2 Downlink Rates : 10Mbps peak, 6Mbps average Uplink Rates : 5 Mbps peak, 1.2 Mbps average Frequency Band : 2,500 MHz band Power : 23.5 +/ − 0.5 dBm (RSU/CPE) Module : Beceem 250 chipset Module Antennas : t wo SMA male (plug), 5 dBi gain ; finger tighten only; m aximum torque spec is 7 kgf - cm GPS: n o GPS support Industry Standards & Certs: FCC, Sprint, Clearwire Modem Part Number: MC100W For optimum performance, antennas on the MBR1400W - SP should be pointed in opposite directions as shown to the right. This will help prevent overlap with the 2.4 GHz WiFi band.

21. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 19 LAN and WAN P orts: By default, the four orange ports are configured as LAN ( Local Area Network ) ports and the blue port is configured as a WAN ( Wide Area Network — your Internet source) port. Any LAN port, however, can be reconfigured as a WAN port and vice versa. Modem P orts: The MBR1400 has three USB 2.0 ports and two ExpressCard ports. WiFi Antenna Connector s : Your router comes with three 2.4 GHz WiFi antennas ( Reverse SMA) . 5 GHz antennas are available as an accessory. The antennas are simple to attach and adjust for maximum WiFi broadcast. (Finger tight only.) Factory Default Reset: You can return your router to factory default settings by pressing and holding the Reset button. This button is recessed, so it requires a pointed object such as a paper clip to press. Press and hol d for 10 seconds to initiate reset. WPS Button: Wi Fi Protected Setup . When you press the WPS button for five seconds, it allows you to use WPS for WiFi security. The LED will illuminate bl ue to indicate WPS status. Devices must support WPS in order to be configured by this method. Power On/Off: • I = On • O = Off WiFi Broadcast On/Off: You have the option to turn off the WiFi radio. • I = On • O = Off 3G/4G Modem Signal Strength Button: When pressed the bar LEDs indicate signal strength from the Cradlepoint business - g ra de m odem or USB or ExpressCard modem. The signal strength is shown for 10 seconds if the modem does not support concurrent data connection and signal strength measurement. Tapping this button will toggle the Modem Signal S trength display on and off.

101. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 99 6.6 Routing Add a new static route to the IP routing table or edit/remove an existing route. Static routes are unnecessary for most users. They are typically only used in networks with more than one layer, such as when there is a network within a network so that packet destinations are hidden behind an additional router. Adding a static route is a way of tellin g the router about an additional step that packets will need to take to reach their destination. Click Add to create a new static route. IP/Network Address: The IP address of the target network or host. Netmask: The Netmask, along with the IP address, de fines the network the computer belongs to and which other IP addresses the computer can see in the same LAN. An IP address of 192.168.0.1 along with a Netmask of 255.255.255.0 defines a network with 256 available IP addresses from 192.168.0.0 to 192.168.0. 255. NOTE: 255.255.255.255 is used to signify only the host that was entered in the IP/Network Address field. Gateway: Specifies the next hop to be taken if this route is used. A gateway of 0.0.0.0 implies there is no next hop, and the IP address matched is directly connected to the router on the interface specified: LAN or WAN . Allow Network Access : (Default: Deselected.) Some static routes will need an IP Filter Rule via the Firewall to allow packets through the route without being blocked. Selecting this option automatically creates this IP Filter Rule. If the IP/Network Address falls outside the LAN IP range, you probably need to select this option. Distribute: Allow this static route to be distributed via a routing protocol ( Network Settings → Routing Protocols ).

176. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 174 keep all interfaces with t hese rules at a similar percentage utilization of data (e.g. 10%, 50%, 90%) as the cycle progresses, rather than quickly using 100% of a fast 1GB capped interface while using only a fraction of a slow 10GB capped interface, thus leaving the rest of the cyc le with only the slow interface. The Data Usage algorithm on the Load Balancing page must be selected or this checkbox has no effect. Data Usage Rule – page 2 Cycle Type: How often the rule will reset. The data usage amount will be reset at the end of each cycle. Select the length of a cycle from a dropdown menu with the following choices: • Daily • Weekly • Monthly Cycle Start Date: Select the date you wish the rule to begin. This date will be used to track when the rule will reset. Shutdown WAN on Cap: If s elected , the WAN device will shut down when the assigned usage is reached. A cycle reset or a rule deletion will re - enable the device. Send Alert on Cap: An email alert will be generated and sent when the assigned usage is reached. WARNING: The SMTP mail server must be configured in System Settings → Device Alerts . Custom Alert: When checked you enable a second email to be configured for a percentage of the assigned usage. Percent of Usage (1 - 1000): If selected, a custom alert will be sent when your data u sage reaches this percentage of your usage cap. For example, you could set this at 90 percent so that you know when your usage is nearing 100 percent of the cap.

35. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 33 6) Cradlepoint recommends that you customize your WiFi network name. Type in your personalized n etwork name here. You can also enable the Guest Network feature (for more configuration options, see Network Settings → WiFi / Local Network s and the Wireless (WiFi) Netwo rk Settings section of this manual ). Choose the WIFI SECURITY MODE that best fits your needs: • BEST (WPA2): Select this option if your wireless adapters support WPA2 - only mode. This will connect to most new devices and is the most secure, but may not connect to older devices or some handheld devices such as a PSP. • GOOD (WPA1 & WPA2): Select this option if your wireless adapters support WPA or WPA2. This is the most compatible with modern devices and PCs. • POOR (WEP): Select this option if your wireless adapters only support WEP. This should only be used if a legacy device that only supports WEP will be connecte d to the router. WEP is insecure and obsolete and is only supported in the router for legacy reasons. The router cannot use 802.11n modes if WEP is enabled; WiFi performance and range will be limited. • NONE (OPEN): Select this option if you do not want to a ctivate any security features. Cradlepoint recommends BEST (WPA2) WiFi security. Try this option first and switch only if you have a device that is incompatible with WPA2 .

215. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 213 8.1 Administration Select the Administration submenu item in order to control any of the following functions: • Router Security • System Clock • Local Management • Remote Management • GPS • SMS • System Logging • Router Services 8.1.1 Router Security Advanced Security Mode: When the router is configured to use the advanced security mode, several aspects of the router’s configuration and networking functionality will be extended to support high security environments. This includes support for multiple user accounts, increased password security, and additional network spoofing filters. If you plan to use your router in a PCI DSS compliant environment this option is mandatory. Admin Pa ssword: Enter a password for the administrator who will have full access to the router's management interface. You can use the default password on the back of your product, or you can create a custom Administrator Password.

261. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 259 Network Layer The third layer of the OSI model which handles the routing of traffic on a network. Network Time Protocol Used to synchronize the time of all the computers in a network. NIC Network Interfa ce Card. NTP Network Time Protocol. OFDM Orthogonal Frequency - Division Multiplexing . T he modulation technique for both 802.11a and 802.11g. OSI Open Systems Interconnection . T he reference model for how data should travel between two devices on a network. OSPF Open Shortest Path First . A routing protocol that is used more than RIP in larger scale networks because only changes to the routing table are sent to all the other routers in the network as opposed to sending the entire routing table at a regular interval, which is how RIP functions. Password A sequence of characters that is used to authenticate requests to resources on a network. Patch A patch is an update to a vulnerable program or system. A common practice to keep your computer and mobile device s secure is installing the vendor’s latest patches in a timely fashion. Some vendors release patches on a monthly or quarterly basis. Therefore, having a computer that is unpatched for even a few weeks could leave it vulnerable. Personal Area Network The i nterconnection of networking devices within a range of 10 meters. Phishing Phishing is a social engineering technique where cyber attackers attempt to fool you into taking an action in response to an email. Phishing was a term originally used to describe a specific attack scenario. Attackers would send out emails pretending to be a trusted bank or financial institution ; their goal was to fool victims into clicking on a link in the email. Once clicked, victims were taken to a website that pretended to be the bank, but was really created and controlled by the attacker. If the victim attempted to log in thinking they were at their bank, their login and password would then be stolen by the attacker. The term has evolved and often means not just attacks designed to steal your password, but emails designed to send you to websites that hack into your browser, or even emails with infected attachments.

9. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 7 1.4 Cradlepoint ARC MBR1400 Series The Cradlepoint ARC MBR1400 Series i nclude s a Cradlepoint 3G/4 G business - grade m odem with the MBR1400 and create s an effortless instant network from high - speed wireless broadband. Cradlepoint i ntegrated business - grade m odems are specifically designed to provide the highest level of performa nce, reliability, and security for 24x7 business - critical applications. Antennas can be located and oriented to receive the highest signal strength. The ARC Series intelligently manage s the co existence between the mobile broadband signal and the WiFi broadcast of the router. Choose from the following ARC MBR1400 Products : • MBR1400 LE - VZ – 4G LTE/EVDO for Verizon • MBR1400LP - AT – 4 G LTE/HSPA+ for AT&T • MBR1400LP2 - EU – 4G LTE/HSPA+ for Europe • MBR1400LP – 4G LTE/HSPA+ for Canada • MBR1400W – 4G WiMAX for Sprint or CLEAR Discontinued: • MBR1400 E - VZ – 3G EVDO for Verizon • MBR1400 E - SP – 3G EVDO for Sprint

139. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 137 Upload Priority: The priority value has two different e ffects on traffic. Higher priority traffic is handled before lower priority traffic, which can lead to shorter response times. Also, when spare bandwidth is available it is offered to higher priority queues first. Move the slider to select from the followi ng options (Default: Normal): • Lowest • Lower • Below Normal • Normal • Above Normal • High • Higher • Highest Click Next to continue to the next page. Download Bandwidth Enable Download QoS: ( Default: Enabled.) Deselect if you want your rule to apply to upload traffic only. Leave this selected to include download restrictions with this queue. Borrow Spare Bandwidth: ( Default: Enabled.) When this is enabled, the interfaces/protocols associated w ith this rule will borrow unused bandwidth from other rules. Disabling borrowing will restrict the traffic to the specified bandwidth. Higher priority queues will be offered excess bandwidth first. Download Bandwidth: Th is is the percentage of the connect ed WAN upload bandwidth that will be reserved for the specified traffic. The maximum value is adjusted to the remaining percentage after other queues receive their share.

196. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 194 7.10.2 Page 2 - 3 : Local and Remote Network s Local Network : T he Network Address and the Netm ask define what local devices have access to or can be accessed from the VPN tunnel. The MBR1400 will automatically fill in the values for your network, but you can change the values to limit the tunnel to only some of the devices in your network. NOTE : T he local network IP address must be different from the remote network IP address. Remote Network : Enter the remote Gateway 's IP address or fully qualified domain name (my.domain.com). It is recommended you use a dynamic DNS host name instead of the static IP address. By using the dynamic DNS host name updates of the remote WAN IP are compensated for whi le connecting to a VPN tunnel. Enter the Network IP address with the Subnet Mask to define the remote network subnet that the loca l devices will have access to. NOTE : T he remote network IP address must be different from the local network IP address.

237. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 235 8.3 Enterprise Cloud Manager Cradlepoint ECM is a cloud - based management service for configuring, monitoring , and organizing your Cradlepoint routers. Key features include: • Group based configuration management • Health monitoring of router connectivity and data usage • Remote management and control of routers • Historical record keeping of device logs and status Visit http:// Cradlepoint .com/ecm to learn more about Cradle point ECM . If you do not have ECM credentials, sign up at: http://www. Cradlepoint .com/ecm - signup . Registering Your Router Once you have signed up for ECM, click on the Register Router button to begin managing the router through ECM. Input your ECM Username and E CM Password and click Register . You have now registered the device with Enterprise Cloud Manager. Suspend ing the ECM Client Click on the Suspend Client button to stop communication between the device and ECM. Suspending the client will make it stop any cur rent activity and go dormant. It will not attempt to contact the server while suspended. This is a temporary setting that will not survive a router reboot; to disable the client altogether use the Advanced Enterprise Cloud Manager Settings panel (below).

266. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 264 Web browser A utility that allows you to view content and interact with all of the information on the World Wide Web. WEP Wired Equivalent Privacy . S ecurity for wireless networks that is supposed to be comparable to that of a wired network. Wi - Fi Wireless Fidelity. Used to describe any of the 802.11 wireless networking specifications. Wi - Fi Protected Access An updated version of security for wireless networks that provides authentication as well as encryption. Wide Area Network The larger network that your LAN is connected to, which may be the Internet itself, or a regional or corporate network. Wir eless (Wi - Fi) LAN Connecting to a Local Area Network over one o f the 802.11 wireless standards. WISP Wireless Internet Service Provider. A com pany that provides a broadband Internet connection over a wireless connection. WLAN Wireless Local Area Network. WPA Wi - Fi Protected Access. A Wi - Fi security enhancement that pr ovides improved data encryption, relative to WEP. xDSL A generic term for the family of digital subscriber line (DSL) technologies, such as ADSL, HDSL, RADSL, and SDSL. Yagi antenna A directional antenna used to concentrate wireless signa ls on a specific location.

64. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 62 • Type WiMAX • Port • Manufacturer Franklin Wireless Corporation Statistics • Outgoing Bits/Second • Incoming Bits/Second • Incoming Bytes • Outgoing Bytes

81. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 79 6.1.2 Default Filter Settings Use Default Network Filter Settings together with Network Web Filter Rules to control website access. All of your n e tworks are set to allow website access by default. Select a network and click Edit to change the default filter settings. Default Action : Select from the following dropdown options: • Allow Access (default) • Block Access When a network is set to A llow Access , it will allow access to sites not specifically blocked in the Web Filter Rules. When a network is set to Block Access , it will block access to sites not specifically allowed in the Web Filter Rules. Filter URLs by IP Address : (Default: No) Changing this option to “Yes” will cause the router to perform a DNS lookup on URL entries , and the IP addresses will be appended to the appropriate block/allow list. This can have the side effect of being very strict ; sites that are hoste d across many domains may need every domain added to the list for full functionality.

83. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 81 6.1.4 MAC Address Web Filter Defaults Use MAC Address Web Filter Defaults together with MAC Address WebFilter Rules to control website access for specific MAC addresses. By default, each MAC address is allowed website access. Click Add/Edit to change this setting for a MAC address. Input the MAC address and default action you would like to apply to that MAC address. Default Action: Select from the following dropdown options: • Allow Access (default) • Block Access When a network is set to Allow Access , it will allow access to sites not specifically blocked in the Web Filter Rules. When a network is set to Block Access , it will block access to sites not specifically allowed in the Web Filter Rules.

93. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 91 6.4.2 Network Prefix Translation (Advanced) Network Prefix Translation is used in IPv6 networks to translate one IPv6 prefix to another. IPv6 prefix translation is an experimental specification ( RFC 6296 ) trying to achieve address independence similar to NAT in IPv4. Unlike NAT , however, NPT is stateless and preserves the IPv6 principle that each device has a routable public address . But it still breaks any protocol emb edding IPv6 addresses (e.g. IPsec ) and is generally not recommended for use by the IETF. NPT can help to keep internal network ranges consistent across various IP v6 providers, but it can not be used effectively in all situations. The primary purpose for Cradlepoint ’s NPT implementation is for failover/failback and load balancing setups. LAN clients can potentially retain the original IPv6 lease information and may experience a more seamless transition when WAN connectivity changes than if not utilizing NPT. Mode: • None – No translation is performed • Load Balance Only – (Default) Only translate networks when actively load balancing • First – Use the first IPv6 prefix fo und • Static – Always use a static IPv6 translation (input the prefix here) Transitioning from short pr efix to a longer prefix (such as from /48 to /64) is not without problems , as some of the LANs may lose IPv6 connectivity.

153. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 151 Auto IPv6 auto - configuration mode uses DHCPv6 and/or SLAAC to configure the IPv6 networks. When you select Auto , all of the following settings are optional (depending on your provider’s requirements): • PD Request Size – Prefix Delegation request size. This is the size of IPv6 network that will be requested from the ISP to delegate to LAN networks. (Default: 63) • Primary IPv6 DNS Server – (optional) Depending on your provider, this may be required . This o nly takes effect if the default global DNS se tting on the Network Settings → DNS page is "Automatic". • Additional IPv6 DNS Server – Secondary DNS server. • Delegated IPv6 Network – (optional) Network available for delegation to LANs. Depending on your provider, this may be required . Prefixes specified here only take effect if those supplied by the connection are insufficient to configure your LANs. • Delegated IPv6 Network – Additional network available for delegation to LANs . Example Configuration:

38. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 36 9) Configuring Failure Check : It is possible for a WAN interface to go down without the router recog nizing the failure. ( For example: the carrier for a cellular modem goes dormant , or your Ethernet connection is properly attached to a modem but the modem becomes disconnected from its Internet source. ) Enable Failure Check to ensure that you can get out to the Internet via your primary WAN connection. This option is disabled by default because it may use data unnecessar ily. Use this in combination with failover, or f or cellular modems, use this in combination with Aggressive Reset ( Internet → Connection Manager under Modem Settings in the interface /rule editor). Idle Check Interval : Set the number of seconds the router will wait between checks to see if the WAN is still available. (Default: 30 seconds. Range: 10 - 3600 seconds.) Monitor while connected : Select from the dropdown menu. (Default: Off) • Active Ping: A ping request will be sent to the Ping Target. If no data is received, the ping request will be re tried 4 times at 5 - second intervals. If still no data is received, the device will be d isconnected and failover will occur. When “Active Ping” is selected, the next line gives an estimate of data usage in this form: “Active Ping could use as much as 9.3 MB of data per month.” This amount depends on the Idle Check Interval. • Off: Once the link is established the router takes no action to verify that it is still up. Ping IP Address : If you selected “Active Ping”, you will need to input an IP address that will respond to a ping request . This IP address must be an address that can be reached throu gh your WAN connection (modem/Ethernet). Some ISPs/Carriers block certain addresses, so choose an address that all of your WAN connections can use. For best results, select an established public IP address. For example, you might ping Google Public DNS at 8.8.8.8 or Level 3 Communications at 4.2.2.2. Click NEXT .

86. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 84 • Real - Time Reporting • Behavioral Analysis • URL Filtering • Advanced Threat Protection • Inline Anti - Virus & Anti - Spyware • Web 2.0 Control • Data Loss Prevention • Bandwidth Management • Web Access Control • And mo re... NOTE: Zscaler require s a feature license. Go to Syst em Settings → Feature Licenses to enable this feature . Enter your Zscaler acco unt information to enable the se settings. Input local network information (Network Address and Netmask) to assign your Zscaler implementation to one or more local network(s).

206. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 204 7.11.2 Saved Profiles This is a list of WiFi networks that have already been configured as WAN sources (or Bridge profiles) . The router will attempt to connect to any of these access points using the password you have configured. If more than one access point is in range, then the router will connect with the highest priority network. Network: The name (SSID , or Service Set I dentifier ) that is broadcast by the access point. BSSID: The numeric ID of the network (Basic Service Set Identifier) . This parameter is required when trying to connect to a hidden network using WiFi as WAN. It is optional when connecting to a visible netw ork. If it is set in a profile, both the SSID and BSSID must match to connect to an access point. If the BSSID is not set in a profile, then the router will connect to any access point that matches the given SSID. Auth Mode: The type of encryption that is used by the network. • None • WEP Auto • WEP Open • WEP Shared • WPA1 Personal • WPA2 Personal • WPA1 & WPA2 Personal 7.11.3 Site Survey This is a list of WiFi networks that the router can currently find, along with information about the network such as its mode and channel. If you click on a n etwork in the Site Survey , you can import it as a saved profile. You can sort the list based on any of the fields by clicking on the field name.

143. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 141 Use ports and/or IP addresses to define the type(s) of traffic attached to this rule. Leaving any field blank will match all values; all fields are optional. Source Port(s) and/or Destination Port(s) : Enter a port number between 1 and 65535. To enter a single port number, input the number into the left box. To enter a range of ports, fill in both boxes separated by the colon. For example "80:90" would represent all ports between 80 and 90 including 80 and 90 themselves. So urce IP Address , Source Netmask , Destination IP Address , and Destination Netmask: Specify an IP address or range of IP addresses by combining an IP address with a netmask for either “source” or “destination” (or both). Source vs. destination is defined by traffic flow. Leave these blank to include all IP addresses (such as if your rule is defined by a particular port instead). E XAMPLE: If you want to associate this rule with your guest LAN, you could input the IP address and netmask for the guest LAN here ( leaving the last slot “0” to allow for any user attached to the guest network): • Source IP Address: 192.168.10.0 • Source Netmask: 255.255.255.0 DSCP (DiffServ) : Differentiated Services Code Point (DSCP) is the successor to TOS (Type of Service). Use this field to select traffic based on the DSCP header in each IP packet. This field is sometimes set by latency sensitive equipment such as VoIP phones. This setting is optional. For more information see the Differentiated services Wikipedia page. DSCP Negate : When checked this rule will match on any packet that does not match the DSCP field. Click Finish to save this rule .

144. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 142 7 INTERNET The Internet tab provides access to these submenu items for managing a variety of Internet connection options . • Connection Manager • CP Connect • Client Data Usage • Data Usage • GRE Tunnels • L2TP Tunnels • Network Mobility (NEMO) • NHRP Interfaces • OpenVPN Tunnels • VPN Tunnels • WiFi as WAN / Bridge • WAN Affinity / Load Balancing

3. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 ` Table of Contents 1 INTRODUCTION ................................ ................................ 3 1.1 P ACKAGE C ONTENTS ................................ ............................. 3 1.2 S YSTEM R EQUIREMENTS ................................ ......................... 3 1.3 MBR1400 O VERVIEW ................................ .......................... 4 1.4 C RADLEPOINT ARC MBR1400 S ERIES ................................ ..... 7 2 HARDWARE OVERVIEW ................................ .................. 15 2.1 P ORTS , B UTTONS , AND S WITCHES ................................ .......... 17 2.2 LED S ................................ ................................ ................ 20 3 QUICK START ................................ ................................ .. 21 3.1 B ASIC S ETUP ................................ ................................ ...... 21 3.2 C ONNECT TO A C OMPUTER OR OTHER D EVICE .......................... 22 3.3 C OMMON P ROBLEMS ................................ .......................... 25 4 WEB INTERFACE – ESSENTIALS ................................ ........ 29 4.1 A DMINISTRATOR L OGIN ................................ ....................... 30 4.2 G ETTING S TARTED – F IRST T IME S ETUP W IZARD ....................... 32 4.3 Q UICK L INKS ................................ ................................ ...... 38 4.4 C ONFIGURATION P AGES ................................ ....................... 40 4.5 E NTERPRISE C LOUD M ANAGER R EGISTRATION .......................... 42 4.6 IP P ASSTHROUGH S ETUP ................................ ...................... 43 5 STATUS ................................ ................................ ........... 44 5.1 C LIENT L IST ................................ ................................ ........ 45 5.2 CP C ONNECT ................................ ................................ ..... 47 5.3 D ASHBOARD ................................ ................................ ...... 48 5.4 GPS ................................ ................................ ................. 52 5.5 GRE T UNNELS ................................ ................................ ... 53 5.6 H OTSPOT C LIENTS ................................ ............................... 54 5.7 I NTERNET C ONNECTIONS ................................ ...................... 55 5.8 R OUTING ................................ ................................ .......... 67 5.9 S TATISTICS ................................ ................................ ......... 70 5.10 S YSTEM L OGS ................................ ................................ .. 73 5.11 VPN T UNNELS ................................ ................................ . 74 5.12 W I P IPE Q O S ................................ ................................ ... 75 6 NETWORK SETTINGS ................................ ....................... 76 6.1 C ONTENT F ILTERING ................................ ............................ 77 6.2 DHCP S ERVER ................................ ................................ ... 85 6.3 DNS ................................ ................................ ................ 86 6.4 F IREWALL ................................ ................................ .......... 89 6.5 MAC F ILTER / L OGGING ................................ ...................... 97 6.6 R OUTING ................................ ................................ .......... 99 6.7 R OUTING P ROTOCOLS ................................ ........................ 100 6.8 W I F I / L OCAL N ETWORKS ................................ .................. 110 6.9 W I P IPE Q O S ................................ ................................ ... 135 7 INTERNET ................................ ................................ ...... 142 7.1 C ONNECTION M ANAGER ................................ .................... 143 7.2 CP C ONNECT ................................ ................................ ... 170 7.3 C LIENT D ATA U SAGE ................................ ......................... 171

46. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 44 5 S TATU S The Status tab displays information about many different aspects of the router . It provides access to these submenu options : • Client List • CP Connect • Dashboard • GPS • GRE Tunnels • Hotspot Clients • Internet Connections • Routing • Statistics • Sy stem Logs • VPN Tunnels • WiPipe QoS

159. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 157 7.1.6 Ethe rnet Settings While default settings for each WAN Ethernet port will be sufficient in most circumstances, you have the ability to control: • Connect Method: DHCP (Automatic), Static (Manual), or PPPoE (Point - to - Point Protocol over Ethernet). • MAC Address: You have the ability to change the MAC address, but typically this is unnecessary. You can match this address with your device’s address by clicking: “ Clone Your PC’s MAC Address ”. Connect Method Select the connection type that you need for this WAN conne ction. You may need to check with your ISP or system administrator for this information. • DHCP (Dynamic Host Configuration Protocol) is the most common configuration. Your router’s Ethernet ports are automatically configured for DHCP connection. DHCP automatically assigns dynamic IP addresses to devices in your networks. This is preferable in most circumstances. • Static allows you to input a specific IP address for your WAN connection; this should be provided by the ISP if supported. • PPPoE should be configured with the username, password and other settings provided by your ISP. If you want to use a Static (Manual) or PPPoE connection, you will need to fill out additional information.

209. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 207 7.12 WAN Affinity and Load Balancing Load Balance Select the Load Balance Algorithm from the following dropdown options: • Round - Robin: Evenly distribute each session to the available WAN con nections. • Rate: Distribute load based on the current upload and download rates. A WAN device's upload and download bandwidth values can be set in Internet → Connection Manager . • Spillover: This was the default algorithm in older (version 3) firmware. Load i s always given to devices with the most available bandwidth. The estimated bandwidth rate is based on a combination of the upload and download configuration values and the observed capabilities of the device. • Data Usage: This mode works in concert with the Data Usage feature ( Internet → Data Usage ). The router will make a best effort to keep data usage between interfaces at a similar percentage of the assigned data cap in the Data Usage rule for each interface, rather than distributing sessions based solely on bandwidth. For proper function you need to create data usage rules for each WAN device you will be load balancing. Make certain to select the "Use with Load Balancing" checkbox in the Data Usage rule editor. WAN Affinity WAN Affinity rules allow you t o manage traffic in your network so that particular bandwidth uses are associated with particular WAN sources. This allows you to prioritize bandwidth. EXAMPLE: You could specify that your guest LAN is only associated with your Ethernet connection with no failover. Then if your Ethernet conn ection goes down and the embedded modem connects for failover for your primary LAN, your guest LAN will not take bandwidth from your primary LAN, saving you money. Click “Add” to open the WAN Affinity Policy Editor and create a new WAN Affinity rule. Name: Give a name for your rule that is meaningful to you.

91. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 89 6.4 Firewall The router automatically provides a firewall. Unless you configure the router to the contrary, the router does not respond to unsolicited incoming requests on any port, thereby making your LAN invisible to cyber attackers. However, some network applicatio ns cannot run with a tight firewall. Those applications need to selectively open ports in the firewall to function correctly. The options on this page control ways of opening the firewall to address the needs of specific types of applications. 6.4.1 Port Forwar ding Rules A port forwardin g rule allows traffic from the Internet to reach a computer on the inside of your network. For example, a port forwarding rule might be used to run a Web server . Exercise caution when adding new rules as they impact the security of your network. Click Add to create a new port forwarding rule , or select an existing rule and click Edit . Add /Edit Port Forwarding Rule • Name: Name your rule. • Use Port Range: Changes the selection options to allow you to input a range of ports (if desired) . • Internet Port(s): The port number(s) as you want it defined on the Internet . Typically these will be th e same as the local port numbers , but they do not have to be. These numbers will be mapped to the local port numbers. • Loc al Computer: Sel ect the IP address of an attached device from the dropdown menu, or manually input the IP address of a device.

105. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 103 Redistribute Routes : Redistribute routes of the specified protocol or kind into BGP, with the metric type and metric set (if specified), filtering the routes using the given route ma p (if specified). Redistributed routes may also be filtered with distribute lists. • Type : The type is the source of the route. Select from: Main, Connected, Static, RIP, OSPF. • Metric: Numerical priority of the route. • Route Map : Route maps provide a means to filter and/or apply actions to routes, allowing policies to be applied to routes. 6.7.3 RIP Routing RIP (Routing Information Protocol) is a widely deployed interior gateway protocol. RIP is a distance - vector protocol based on the Bellman - Ford algorithms. As a distance - vector protocol, RIP sends updates from one router to its neighbors periodically , allowing the convergence to a known topology. In each update, the distance to any given network will be broadcast to its neighboring router. The router supports RIP version 2 as described in RFC2453 and RIP version 1 as described in RFC1058. RIP Editor • Name : Unique name of the policy. • Metric : RIP metric is a value for distance for the network. Usually RIP increments the metric when the network information is rec eived. The metric for redistributed routes is set to 1. • Protocol Version : RIP can be configured to send either Version 1 or Version 2 packets. The default is to send RIPv2 while accepting both RIPv1 and

154. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 152 Static As with IPv4, static configuration is availab le for situations where the WAN IPv6 topology is fixed. • IPv6 Address/CIDR – Input the IPv6 static IP address and mask length provided by your ISP (see http://en.wikipedia.org/wiki/ Classless_Inter - Domain_Routing for an explanation of CIDR). • IPv6 Gateway IP – Input the IPv6 remote gateway IP address provided by your ISP . • Primary IPv6 DNS Server – (optional) Depending on your provider/setup, this may be required . This o nly takes effect if the default global DNS setting on the Network Settings → DNS page is "Automatic". • Additional IPv6 DNS Server – Secondary DNS server. • Delegated IPv6 Network – (optional) Network available for delegation to LANs. Depending on your provid er, this may be required . Prefixes specified here only take effect if those supplied by the connection are insufficient to configure your LANs. • Delegated IPv6 Network – Additional network available for delegation to LANs . Example Configuration:

162. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 160 7.1.7 Modem Settings Not all modems will have all of the options shown below; the available options are specific to the modem type. On Demand: Typically modem connections are not always on. When this mode is selected a connection to the Inte rnet is made as needed. When this mode is not selected a connection to the Internet is always maintained. Aggressive Reset: When Aggressive Reset is enabled the system will attempt to maintain a good modem connection. If the Internet has been unreachable f or a period of time, a reset of the modem will occur in attempt to re - establish the connection. Network - Initiated Alerts : This field controls whether the Sprint network can disconnect the modem to apply updates, such as for PRL, modem firmware, or configuration events. These activities do not change any router settings, but the modem connection may be unavailable for periods of time while these updates occur. The modem may also require a reset after a modem firmware update is complete. • Disabled: The request to update will be refused. • When Disconnected: The request to update will only be performed when the modem is either in a disconnected state or dormant state. If the modem is not in one of these states when the request is received, then the rout er will remember the request and perform the update when the modem becomes disconnected/dormant. • On Schedule: The request to update will only be performed at the specified scheduled time, no matter what the state of the modem is. Network - Initiated Sched ule: When you select “ On Schedule ” for Network - Initiated Alerts , you also select a time from this dropdown list. Modem updates will take place at this scheduled time.

204. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 202 7.11 W iFi as WAN / Bridge WiFi as WAN uses an outside WiFi network as its Internet source and then rebroadcast s its own local network. For example, the MBR1400 can create a private LAN using the public WiFi from a hotel as its WAN. WiFi Bridge functions similarly, but it rebroadcasts the o riginal network – the router passes on the same settings and addresses already set up by the original NAT . The WiFi as WAN and WiFi Bridge features cannot both be used at the same time. When either WiFi as WAN or WiFi Bridge is enabled, the MBR1400 will find other WiFi networks that you can select and connect to. Unless a selected WiFi source is on an unprotected network, you will need to know its password or key. All Cradlepoint routers and some other routers use the same default IP address for the primary network, 192.168.0.1. If you att empt to set up WiFi as WAN and there is an “IP conflict,” you need to change the IP address. The router is attempting to use the same IP address for both WAN and LAN, which is impossible. Go to Network Settings → WiFi / Local Networks . Select the network a nd click Edit . You can change the IP address under IP Settings . For example, you might change 192.168. 0 .1 to 192.168. 1 .1. NOTE: Connecting to a corporate network with enterprise authentication requires a feature license and hardware version 2.0. Go to Syst em Settings → Feature Licenses to enable this feature .

252. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 250 9 GLOSSARY 802.11 A family of specifications for wireless local area networks (WLANs) developed by a working group of the Institute of Electrical and Electronics Engineers (IEEE). Access Control List ACL. A database of network devices that are allowed to access resources on the network. Access Point AP. A d evice that allows wireless clients to connect to it and access the network. ActiveX A Microsoft specification for the interaction of software components. Ad - hoc network Peer - to - Peer network between wireless clients. Address Resolution Protocol ARP. Used to map MAC addresses to IP addresses so that conversions c an be made in both directions. ADSL Asymmetric Digital Subscriber Line. Advanced Encryption Standard AES. Government encryption standard. Alphanumeric Characters A - Z and 0 - 9. Antenna Used to transmit and receive RF signals. Anti - virus A security program th at can run on a computer or mobile device and protects you by identifying and stopping the spread of malware on your system. Anti - virus cannot detect all malware, so even if it is active, your system might still get infected. Anti - virus can also be used at the organizational level. For example, email servers may have anti - virus integrated with it to scan incoming or outgoing email. Sometimes anti - virus tools are called 'anti - malware', because these products are designed to defend against various types of ma licious software. AppleTalk A set of Local Area Network protocols developed by Apple for their computer systems. AppleTalk Address Resolution Protocol AARP. Used to map the MAC addresses of Apple computers to their AppleTalk network addresses, so that conversions can be made in both directions.

255. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 253 Decrypt To unscramble an encrypted message back into plain text. Default A predetermined value or setting that is used by a program when no user input has been entered for this value or setting. Demilitarized zone DMZ . A single computer or group of computers that can be accessed by both users on the Interne t as well as users on the Local Network, but that is not protected by the same security as the Local Network. DHCP Dynamic Host Configuration Protocol . Used to automatically assign IP addresses from a predefined pool of addresses to computers or devices th at request them. Digital certificate An electronic method of providing credentials to a server in order to have access to it or a network. Direct Sequence Spread Spectrum DSSS: Modulation technique used by 802.11b wireless devices. DNS Domain Name System . Translates Domain Names to IP addresses. Domain name A name that is associated with an IP address. Download To send a request from one computer to another and have the file transmitted back to the requesting computer. Drive - by Download These attacks exploit vulner abilities in your browser or it s plugins and helper applications when you simply surf to an attacker - controlled website. Some computer attackers set up their own evil websites that are designed to automatically attack and exploit anyone that visits the website. Other attackers compromise trusted websites such as ecommerce sites and deploy their exploit software there. Often these attacks occur without the victims realizing that they are under attack. DSL Digital S ubscriber Line. High bandwidth Internet connection over telephone lines. Duplex Sending and Receivi ng data transmissions at the sam e time. Dynamic DNS service Dynamic DNS is provided by companies to allow users with Dynamic IP addresses to obtain a Domain Name that will always b e linke d to their changing IP address. The IP address is updated by either client software running on a

37. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 35 8) Modem Authentication : Some modems require a username and password to be entered to authenticate with a carrier. Do not fill in these fields unless you are sure your modem needs authentication. • Authentication Protocol – Set this only if your service provider requires a specific protocol and the Auto option chooses the wrong one. Select from: o Auto o Pap o Chap • Username • Password

106. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 104 RIPv2 (and replying with packets of the appropriate v ersion for REQUESTS / triggered updates). • Password : RIPv2 allows packets to be authenticated via either an insecure plain text password, included with the packet, or a more secure MD5 based HMAC (keyed - Hashing for Message AuthentiCation). RIPv1 cannot be a uthenticated at all, so when authentication is configured RIP will discard routing updates received via RIPv1 packets. • Enabled : Click to enable/disable the policy. (Default: enabled.) Networks : Set the RIP - enabled interfaces by network. RIP is enabled on the interfaces that have addresses within the network range. Neighbors : When a neighbor doesn't understand multicast, this command is used to specify neighbors. In some cases, not all routers will be able to understand multicasting, where packets are sent to a network or a group of addresses. In a situation where a neighbor cannot process multicast packets, it is necessary to establish a direct link between routers. The neighbor command allows the network administrator to specify a router as a RIP neighbor. The no neighbor a.b.c.d command will disable the RIP neighbor. Assign a neighbor by inputting an IP address. Redistribute Routes : Redistribute routes of the specified protocol or kind into BGP, with the metric type and metric set (if specified), filterin g the routes using the given route map (if specified). Redistributed routes may also be filtered with distribute lists. • Type : The type is the source of the route. Select from: Main, Connected, Static, RIP, OSPF. • Metric: Numerical priority of the route. • Rou te Map : Route maps provide a means to filter and/or apply actions to routes, allowing policies to be applied to routes.

259. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 257 Kbyte Kilobyte. L2TP Layer 2 Tunneling Protocol. LAN Local Area Network. Latency The amount of time that it takes a packet to get from the one point to another on a network. Also referred to as delay. LED Light Emitting Diode. Legacy Older devices or technology. Local Area Network LAN. A group of computers in a building that usually access files from a server. LPR/LPD “Line Printer Requestor”/”Line Printer Daemon”. A TCP/IP protocol for transmitting streams of printer data. MAC Address A unique hardware ID assign ed to every Ethernet adapter by the manufacturer. Malware Malware stands for 'malicious software'. It is any type of code or program cyber attackers use to perform malicious actions. Traditionally there have been different types of malware based on their c apabilities and means of propagation, as listed below. However , these technical distinctions are no longer relevant as modern malware combines the characteristics from each of these in a single program. • Virus: A type of malware that spreads by infecting ot her files, rather than existing in a standalone manner. Viruses often – though not always – spread through human interaction, such as opening an infected file or application. • Worm: A type of malware that can propagate automatically, typically without requi ring any human interaction for it to spread. Worms often spread across networks, though they can also infect systems through other means, such as USB keys. An example of a worm is Conficker, which infected millions of computer systems starting in 2008 and is still active today. • Trojan: A shortened form of "Trojan Horse", this type of malware appears to have a legitimate or at least benign use, but masks a hidden sinister function. For example, you may download and install a free screensaver which actually w orks well as a screensaver. But that software could also be malicious, it will infect your computer once you install it.

15. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 13 MBR 1 4 00 E - VZ 3G EVDO for Verizon Technology : EVDO Rev A Downlink Rates : 3.1 Mbps (theoretical) Uplink Rates : 1.8 Mbps (theoretical) Frequency Band : CDMA EVDO Rev A/1xRTT (800 /1,900 MHz) Power : 24 +/ − 0.5 dBm (typical conducted) Module : Sierra Wireless 5728v Module Antennas: two SMA male (plug), 2 dBi gain Industry Standards & Certs: modem m odel MC 100E – Verizon IOT; FCC Part 15, 22 & 24, CDG Stages 1,2; IS - 2000IA - 98D/E, IS - 134, IS - 637B, IS - 683A, IS - 707A, IS - 856, IS - 866; JESD22 - A114 - B, JESD22 - C101 Modem Certification Model Number: MC100E Modem Certification Part Number: MC100E - VZ (MBR1400E - VZ has been discontinued.)

102. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 100 6.7 Routing Protocols NOTE: Routing Protocols require a feature license. Go to Syst em Settings → Feature Licenses to enable these features. These protocols also require hardware version 2.0. A routing protocol is a protocol that specifies how routers communicate with each other, disseminating information that enables them to select routes between any two nodes on a computer network. Routing algorithms choose the route. Each router has a prior knowledge only of networks attached to it directly. A routing protocol shares this information first among immediate neighbors, and then throughout t he network. This way, routers gain knowledge of the topology of the network. Choose from the following tabs to configure routing protocols: • BGP Routing • OSPF Routing • RIP Routing • RIPNG Routing • Route Maps and Filters 6.7.1 BGP Routing The latest version of BGP (Border Gateway Protocol) is version 4. BGP - 4 is one of the Exterior Gateway Protocols and de facto standard of Inter Domain routing protocol. BGP - 4 is described in RFC1771 , A Border Gateway Protocol 4 (BGP - 4). BGP is a distanc e vector routing protocol, and the AS - Path framework provides distance vector metric and loop detection to BGP. RFC1930. BGP Editor • Name : Unique name of the policy. • ASN : The AS (Autonomous System) number is one of the essential elements of BGP. • Router - ID : This sets the router - ID of the BGP process. The router - ID may be an IP address of the router, but need not be - it can be

168. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 166 7.1.11 Update/Activate a Modem Some 3G modems can be updated and activated while plugged into the router. Updates and activation methods vary by modem model and service provider. Possible methods are: PRL Updat e, Activation, and FUMO. All supported methods will be displayed when you select your modem and click “ Control ”. If no methods are displayed for your device then you will need to update and activate your device externally. To update or activate a modem, se lect the device and click “Control”. The modem does n ot support Update/Activate methods : A message will state that there is no support for PRL Update, Activation, or FUMO. The modem supports Update/Activate methods : A message will display showing options for each supported method: • Modem Activation / Update : Activate, Reactivate, or Upgrade Configuration. • Preferred Roaming List (PRL) Update • Firmware Update Management Object (FUMO) Click the appropriate icon to start the process. If the modem is connected wh en you start an operation the router will automatically disconnect it. The router ma y start another modem as a fail over measure. When the operation is done the modem will go back to an idle state, at which point the router m ay restart it depending on failo ver and failback settings. NOTE: Only one operation is supported at a time. If you try to start the same operation on the same modem twice the UI will not report failure and the request will finish normally when the original request is done. However if you try to start a different operation or use a different modem , this second request will fail without interfering with the pending operation.

34. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 32 4.2 Getting Started – First Time Setup Wizard The First Time Setup Wizard will help you c ustomize the name of your wireless network, change passwords to something you choose, and establish an optimal WiFi security mode. The MBR1400 comes out of the box with a unique password at WPA1/WPA2 WiFi security level. 1) Open a browser window and type “ cp/ ” or “ 192.168.0.1 ” into the address bar. Press enter/return. 2) When prompted for your password, type the eight character Default Password found on the product label on the bottom of the MBR1400 (this is also the last 8 digits of the router’s MAC address). 3) When you log in for the first time, you will be automatically directed to the FIRST TIME SETUP WIZARD . (Otherwise, go to Getting Started → First Time Setup ). 4) Cradlepoint recommends that you change the router’s ADMINISTRATOR PASSWORD , which is used to log in to the administration p ages . The administrator password is separate from the WiFi security password, although initially the Default P assword is used for both. NOTE: If you plan to use your router in a PCI DSS compliant environment, do not use this setting. Use the “Advanced Security Mode” settings under the Router Security tab in System Settings → Administration instead. 5) You can select your TIME ZONE from a dropdown list. (This may be necessary to properly show time in your router log, but typically your router will automatically determine your time zone through your browser.) Click NEXT .

96. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 94 6.4.4 DMZ: DeMilitarized Zone (Advanced) A DMZ host is effectively not firewalled in the sense that any computer on the Internet may attempt to remotely access network services at the DMZ IP address. Typical uses i nvolve running a public Web server or sharing files. Input the IP Address of a single device in your network to create a DeMilitarized Zone for that device. To ensure that the IP address of the selected device remains consistent, go to the “Reservations” s ection under Network Settings → DHCP Server and reserve the IP address for the device. As with port forwarding, use caution when enabling the DMZ feature as it can threaten the security of your network. Only use DMZ as a last resort. 6.4.5 Application Gateways (Advanced) Enabling an application gateway makes p inholes through the firewall. This may be required for some applications to function, or for an application to improve functionality or add features. Exercise caution in enabling application gatew ays as they impact the security of your network. Enable any of the following types of application gateways: • PPTP : For virtual private network access using Point - to - Point Tunneling Protocol. This is enabled by default. • SIP : For VoIP (v oice over IP ) using Se ssion Initiation Protocol. • TFTP : Enables file transfer using Trivial File Transfer Protocol.

148. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 146 Failure Check (Advanced) If this is enabled, the router will check that the highest priority active WAN interface can get to the Internet even if the WAN connection is not actively being used. If the interface goes down, the router will switch to the next highest priority interface available. If this is not selected, the router will still failover to the next highest priority interface but only after the user has attempted to get out to the Internet and failed. Idle Check Interval: The amount of time between each check. (Default: 30 seconds. Range: 10 - 3600 seconds.) Monitor while connected: (Default: Off) Select from the following dropdown o ptions: • Passive DNS (modem only): The router will take no action until data is detected that is destined for the WAN. When this data is detected, the data will be sent and the router will check for received data for 2 seconds. If no data is received the ro uter behaves as described below under Active DNS . • Active DNS (modem only): A DNS request will be sent to the DNS servers. If no data is received, the DNS request will be retried 4 times at 5 - second intervals. (The first 2 requests will be directed at the P rimary DNS server and the second 2 requests will be directed at the Secondary DNS server.) If still no data is received, the device will be disconnected and failover will occur. • Active Ping : A ping request will be sent to the Ping Target. If no data is rec eived, the ping request will be retried 4 times at 5 - second intervals. If still no data is received, the device will be disconnected and failover will occur. When “Active Ping” is selected, the next line gives an estimate of data usage in this form: “Activ e Ping could use as much as 9.3 MB of data per month.” This amount depends on the Idle Check Interval. • Off : Once the link is established the router takes no action to verify that it is still up. Ping IP Address : If you selected “Active Ping”, you will need to input an IP address. This must be an address that can be reached through your WAN connection (modem/Ethernet). Some ISPs/Carriers block certain addresses, so choose an address that all of your WAN connections can use. For best results, select an establ ished public IP address. For example, you might ping Google Public DNS at 8.8.8.8 or Level 3 Communications at 4.2.2.2.

167. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 165 7.1.10 SIM/APN/Auth Settings SIM PIN : PIN number for a GSM modem with a locked SIM. Authentication Protocol : Set this only if your service provider requires a specific protocol and the Auto option chooses the wrong one. Choose from Auto , PAP , and CHAP and then input your username and password. Access Point Configuration: Some wireless carriers provide multiple Access Point configurations that a modem can connect to. Some APN examples are ‘isp.cingular” and “vpn.com”. • Default : Let the router choose an APN automatically. • Manual : Enter an APN by hand. • Select: This opens a table with 16 slots for APNs, each of whic h can be set as IP, IPV4V6, or IPV6. The default APN is marked with an asterisk (*). You can change the APN names, select a different APN, etc. For Verizon modems, only the third slot is editable. Changes made here are written to the modem, so a factory re set of the router will not impact these settings.

227. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 225 How to Send an SMS Message You can send SMS messages to the router via phone or email. The key elements are: 1. the modem’s MDN 2. the SMS password ( defined above) 3. the comman d You must know the MDN (Mobile Directory Number) of the modem to send SMS me ssages to the router. This is a phone number that can be found under Status → Internet Connections in the router administration pages (or under Devices → Network Interfaces in Enterprise Cloud Manager). How to Text from a Phone 1. Open the text messaging tool on your phone and start a new message. 2. In the To field, enter the modem’s MDN. 3. In the Subject field, enter the SMS password and command. 4. Click Send . How to Text from an Email NOTE: There are limitations with sending texts via email. The SMS engine is currently only compatible with GSM - based carrier operators. 1. Start a new email message. 2. In the To field, enter the modem ’s MDN plus the modem’s carrier domain name (e.g., 2085555555@txt.att.net ). 3. Enter the passw ord and command in either the S ubject field or B ody of the email message. If you use the s ubject fie ld, leave the body blank, and i f you use the body, leave the subject blank. NOTE: The subject field may be limited to a certain number of characters, so if you get an error when sending the command on the subject line, switch to using the body instead.)

16. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 14 (MBR1400E - SP has been discontinued.) M BR 1 4 0 0E - SP 3G EVDO for Sprint Technology : EVDO Rev A Downlink Rates : 3.1 Mbps (theoretical) Uplink Rates : 1.8 Mbps (theoretical) Frequency Band : CDMA Rev A/1xRTT (800 /1,900 MHz) Power : 24 +/ − 0.5 dBm (typical conducted) Module : Sierra Wireless 5728v Module Antennas: two SMA male (plug), 2 dBi gain Industry Standards & Certs: modem m odel MC100E – Sprint; FCC Part 15, 22 & 24, CDG Stages 1,2; IS - 2000IA - 98D/E, IS - 134, IS - 637B, IS - 683A, IS - 707A, IS - 856, IS - 866; JESD22 - A114 - B, JESD22 - C101 Modem Certification Model Number: MC100E Modem Certification Part Number: MC100E - SP

88. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 86 6.3 DNS DNS, or Domain Name System, is a naming system that translates betw een domain names ( www. Cradlepoint .com , for example) and Internet IP addresses ( 206.207.82.197 ) . A DNS server act s as an Internet phone book, translating between names that make sense to people and the more complex numerical identifiers . The DNS page for the MBR1400 has these distinct functions: • DNS Settings : By default y ou r rout er is set to automatically acquire DNS s erver s through your Internet provider (Automatic) . DNS Settings allows you to specify DNS s erver s of your choosing instead (Static) . • Dyn amic DNS Configuration: Allows you to host a server (Web, FTP, etc.) using a domain name that you have purchased (www.yourname.com) with your dynamically assigned IP address. • Known Hosts Configuration: Allows you to map a name ( printer, scanner, laptop , et c.) to an IP address of a device on the network. 6.3.1 DNS Settings You have the op tion to choose specific DNS server s for your network instead of using the DNS server s assigned by your Internet provider. The default DNS server s are usually adequate . You may want to assign DNS servers if the default DNS servers are performing poorly, if you want Wi Fi clients to access DNS servers that you use for customized addressing , or if you have a local DNS server on your network. Automatic Config: Automatic or Static (default : Automatic). Switching to “Static” enables you to set specific DNS servers in the Primary DNS and Secondary DNS fields. Primary DNS and Secondary DNS : If you choose to specify your DNS s ervers, then enter the IP address es of the serve r s you want as your p rimary and secondary DNS s erver s in the s e field s . The DNS server settings will be pre - populated with public DNS server IP addresses. You can override the IP address with any other DNS server IP address of your choice. For example, Google Public D NS servers have the IP addresses 8.8.8.8 and 8.8.4.4 while 4.2.2.2 and 4.2.2.3 are servers from Level 3 Communications.

97. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 95 • FTP : To allow normal mode when using File Transfer Protocol. This is not needed for passive mode. This is enabled by default. • IRC : For Direct Client to Client (DCC) transfer when using Internet Relay Chat. You may wish to forward TCP port 113 for incoming identd (RFC 1413) requests. 6.4.6 Firewall Options (Advanced) Anti - Spoof: Anti - Spoof checks help protect against malicious users faking the source address in packet s they transmit in order to either hide themselves or to impersonate someone else. Once the user has spoofed their address they can launch a network attack without revealing the true source of the attack or attempt to gain access to network services that a re restricted to certain addresses. 6.4.7 Remote Administration Access Control (Advanced) Enable Remote Administration Access Control: Selecting this option allows you to make remote administration tools available to o nly the specified IP addresses. A ccess from a ll other IP addresses will be blocked. This option only filters IP addresses: you must enable Remote Management separately ( System Settings → Administration ). The services affected by this include remote HTTP, HTTPS, SNMP, and SSH configuration tools. Thi s does not restrict access to LAN - based administration , i.e. devices within your network still have administration access . The individual remote administration services can be enabled under System Settings → Administration → Remote Management.

136. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 134 Wireless Mode: Select the WiFi clients the router will be compatible with. Greater compatibility is a tradeoff with better performance. For greatest compatibility with all WiFi devices, select "802.11 a/b/g/n". For best performance, connect wit h only other 802.11n - compatible devices and select "802.11 n." • 802.11 b • 802.11 b/g • 802.11 a/b/g/n • 802.11 b/g/n • 802.11 n Channel Width: Selects whether the router uses a single 20 MHz channel to send/receive, or uses two adjacent 20 MHz channels to create a 40 MHz channel. Higher performance is possible with the 40 MHz channel. Selecting Auto i s generally best. Enabling WiFi as WAN will force 20 MHz only mode. Extended Channel: When operating in 40 M H z mode the access point will use an extended channel eithe r below or above the current channel. Optimal selection will depend on the channels of other networks in the area. MCS: 802.11n uses multiple Modulation Coding Schemes to enable higher throughput in various environments. Since clients can dynamically chang e rates depending on environment , selecting Auto is generally best. Short GI: Short GI is an optimization for shortening the interval between transmissions. May be incompatible with older clients. Greenfield Mode: Greenfield mode uses an 802.11n - only pream ble to transmit packets that older wireless clients cannot interpret. Use of g reenfield mode in a mixed 802.11 environment may result in degraded performance but can improve performance if all devices in the area are 802.11n compatible. R ADIUS Timeout: (Default: 3600 seconds) When using an Enterprise security mode clients will be forced to re - authenticate with the RADIUS server at this interval in seconds. This allows administrators to revoke access so when an attached client’s authenti cation expires, t he client must re - authenticate. R ADIUS Retry: (Default: 60 seconds) When using an Enterprise security mode, if a RADIUS query fails to receive a response from the server it will delay by this interval (in seconds) before attempting another query. This help s protect the network from floods of authentication requests if the RADIUS server is temporarily unreachable.

180. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 178 Tunnel Enabled : Select to activate the tunnel. Keep Alive : This feature monitors the status of a tunnel. This will more accurately determine if the tunnel is alive or not. Choose the length of time in seconds of the Rate for each check (Default: 10 seconds. Range: 2 – 3600 seconds) and the number of Retry attempts (Default: 3. Range: 1 – 255). Page 2 : Routes Adding routes allows you to configure what types of network traffic from the local host or hosts will be allowed through the tunnel. Click Add Route to configure a new route. You will need to input the following information , defined by the remote network : • Network Address • Netmask: (Default: 255.255.255.0) You can set the tunnel to connect to a range of IP address es or to a single IP address. For example, you could input 192.168.0.0 and 255.255.255.0 to connect your tunnel to all the addresses of the remote network in the 192.168.0.x range. Alternatively, you could select a single addres s by inputting that address along with a Netmask of 255.255.255.255 . Click Save to rec ord each new route. When you have finished adding routes, click Finish to save your GRE tunnel configuration.

197. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 195 7.10.3 Page 3: IKE Phase 1 IKE security has two phases, Phase 1 and Phase 2. You have the ability to distinctly configure each phase, but the default settings will be sufficient for most users. To set up a tunnel with a remote site, you need to match your tunnel's IKE negotiation parameters with the remote site. By selecting several encryptio n, hash, and DH group options, you improve your chances for a successful tunnel negotiation. For greatest compatibility, select all options; for greatest security, select only the most secure options that your devices support. Exchange Mode : The IKE proto col has 2 modes of negotiating phase 1 - Main (also called Identity Protection) and Aggressive . • In Main m ode, IKE separates the key information from the identities , allowing for the identities of peers to be secure at the expe nse of extra packet exchanges . • In Aggressive m ode, IKE tries to combine as much information into fewer packets while maintaining security. Aggressive mode is slightly faster but less secure. Because it has better security, Main mode is recommended for most users. Key Lifetime : The lifetime of the generated keys of Phase 1 of t he IPs ec negotiation from IKE. After the time has expired, IKE will r enegotiate a new set of Phase 1 keys. Encryption, Hash, and DH Groups : Each I KE exchange uses one encryption algorithm , one hash function , a nd one DH group to make a secure exchange. • Encryption : Used to encrypt messag es sent and received by IPs ec.

10. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 8 MBR1400LE - VZ 4G /3G LTE/EVDO for Verizon Technology: LTE , EVDO Rev A Downlink Rates: LTE 100 Mbps, EVDO 3.1 Mbps (theoretical) Uplink Rates: LTE 50 Mbps, EVDO 1.8 Mbps (theoretical) Frequency Band: LTE Band 13 (700 MHz) CDMA EVDO Rev A/1xRTT (800 /1,900 MHz) Power: LTE 23 +/ − 1 dBm, EVDO 24 +/ − 1dBm (typical conducted) Module: Sierra Wireless MC7750 Module Antennas: t wo SMA male (plug), 1 dBi (LTE), 2 dBi (Cellular/PC S) gain; finger tighten only; m aximum torque spec is 7 kgf - cm GPS: s tandalone GPS support Industry Standards & Certs: FCC, Verizon Modem Part Number: MC200LE

13. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 11 MBR140 0LP 4G LTE/HSPA+ for Canada Technology: LTE, HSPA+ Downlink Rates: LTE 100 Mbps, HSPA+ 21.1 Mbps (theoretical) Uplink Rates: LTE 50 Mbps, HSPA+ 5.76 Mbps (theoretical) Frequency Band s : • LTE Band 17 (700MHz), Band 4 (AWS) • UMTS/HSPA+ (850/1900/2100 MHz) • EDGE/GPRS/GSM (850/900/1800/1900 MHz) Module Power: LTE 23 +/ − 1 dBm, UMTS 23 +/ − 1 dBm (typ ical conducted) Module: Sierra Wireless MC7700 Module Antennas: t wo SMA male (plug), 1 dBi ( LTE), 2 dBi (Cellular/PCS) gain; finger tighten only ; support for GPS on aux connections GPS: standalone GPS support Industry Standards & Certs: PTCRB, FCC, IC Modem Part Number: MC200LP

125. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 123 Initial Virtual Router State: This controls the initial VRRP failover state for this physical router: c hoose Master or Backup . This sets up the virtual router association more quickly than the Router Priority level, but the Router Priority assignment will eventually overrule this if there is a discrepancy. Authentication: VRRP Authentication Method. This is for legacy purposes: VRRP Authentication has been deprecated as of RFC 3768. Select None or Simple . If you select Simple , input a VRRP group password. Provide Virtual IP in DHCP leases: Select this to automatically set the DHCP default gateway address and DNS server address to the virtual IP in DHCP l eases provided on this network. STP : NOTE: STP require s a feature license. Go to System Settings → Feature Licenses to enable this feature . STP also requires hardware version 2.0. NOTE: STP requires a feature license. Go to Spanning Tree Protocol (STP) allows a network design to include redundant paths while preventing broadcast radiation from bridge loops. Enable STP: Enable Spanning Tree Protocol loop detection. Bridge Priority: Set the priority of the bridge. When determining the root bridge of the spanning tree topology, the bridge priority is compared first. The bridge with the lowest priority value will win. If you want this router to be the root bridge, then set it to a va lue less than the default of 32768. A valid priority value is between 0 and 65535.

235. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 233 8.2.1 SMT P Mail Server Since the MBR1400 does not have its own email server, to receive alerts you must enable an SMTP server. This is possible through most email services (Gmail, Yahoo, etc.) Each SMTP se rver will have different specifications for setup, so you have to look those up separately . The following is an example using Gmail: • Server Address: smtp.gmail.com • Server Port: 587 ( for TLS, or Transport Layer Security port ; the MBR1400 does not support SSL ) . • Authentication Required: For Gmail, mark this checkbox. • User Name: Your full email address • Password: Your Gmail password • From Address: Your email address • To Address: Your email address Once you have filled in the information for the SMTP server, click on the “Verify SMTP Settings” button. You shou ld receive a test email at your account.

265. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 263 Upgrade To install a more recent version of a software or firmware product. Upload To send a request from one computer to another an d have a file transmitted from the requesting computer to the other. UPnP Universal Plug and Play. A standard that allows network devices to discover each other and configure themselves to be a part of the network. URL Uniform Resource Locator . A unique address for files accessible on the Internet . USB Universal Serial Bus. UTP Unshielded Twisted Pair. Virtual Private Network VPN. A secure tunnel over the Internet to connect remote offices or users to their company’s network. VLAN Virtual LAN. VoIP Voice over IP. Send ing voice information over the Internet as op posed to the PSTN. Vulnerability A ny weakness that attackers or their malicious programs may be able to exploit. For example , it can be a bug in a computer program or a misconfigured webs erver. An attacker or malware may be able to take advantage of the vulnerability to gain unauthorized access to the affected system. However, vulnerabilities can also be a weakness in people or organizational processes. Wake on LAN Allows you to power up a computer th r ough its Network Interface Card. WAN Wide Area Network. WCN Windows Connect Now. A Microsoft method for configuring and bootstrapping wireless networking hardware (access points) and wireless clients, including PCs and other devices. WDS Wirel ess Distribution System. A system that enables the interconnection of access points wirelessly.

89. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 87 Force All DNS Requests To Router: Enabling this will redirect all DNS requests from LAN clients to the router's DNS server. This will al low the router even more control over IP addresses even when clients have their own DNS servers statically set. 6.3.2 Dyn amic DNS Configuration The Dynamic DNS feature allows you to host a server (Web, FTP, etc.) using a domain name that you have purchased (www.yourname.com) with your dynamically assigned IP address. Most broadband Internet Service Providers assign dynamic (changing) IP addresses. When you use a Dynamic DNS service provider, you can enter your host name to connect to your server, no matter what your IP address is. Enable Dynamic DNS : Enable this option only if you have purchased your own domain name and registered with a Dynamic DNS service provider. Server Type . Select a d ynamic DNS service pr ovider from the pull - down list: • DynDNS • DNS - O - Matic • ChangeIP • NO - IP • Custom Server (DynDNS clon e) Custom Server Address . Only available if you select Custom Serv er from the Server Address dropdown list . Enter your custom Dyn DNS clone server address here. For e xample: www.m y dyndns . org . Use HTTPS: Use the more secure HTTPS protocol. This is recommended, but could be disabled if not compatible with the server. Host n ame: Enter your host name, f ully qualifi ed. F or example: myhost.mydomain.net . User name : Enter the user name or key provided by the d ynami c DNS service provider . If the d ynamic DNS provider

90. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 88 supplies only a key, enter that key for both the User nam e and Password fields . Password: Enter the p assword or key provided by the d ynamic DNS service provider. 6.3.3 Advanced Dyn amic DNS Settings Update period (hours) . (Default: 576) The time b etween periodic updates to the d ynamic DNS, if your dynamic IP address has not changed. The timeout period is entered in hours so valid values are from 1 to 8760. Override External IP. The external IP is usually configured automati cally during connection. However, in situations where the unit is within a private network behind a firewall or router, the network's external IP address will have to be manually configured in this field. You may find out what your external IP address is b y going to http://myip.dnsomatic.com/ in a web browser. 6.3.4 Known Hosts Configuration The Known Hosts Configuration feature allows you to map a name ( printer, scanner, laptop , etc.) to an IP address of a device on the network. This assigns a new hostname that can be used to conveniently identify a device within the net work, such as an office printer. Click Add to name a device in your network. Fill in the following fields: • Hostname: Choose a name that is meaningful to you. No spaces are allowed in this field. • IP address: The address of the device within your network. EXAMPLE: a personal laptop with IP address 192.168.0.164 could be assigned the name “MyLaptop” . Since the assigned name is mapped to an IP address, the device’s IP address should not change. To ensure that the device keeps the same IP address, go to Network Settings → DHCP Server and reserv e the IP address for the device by selecting the device in the Active Leases list and clicking “Reserve”.

110. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 108 6.7.5 Route Maps and Filters Access Lists This option p rovides for basic filtering based on IP addresses and netmasks. Click Add to create a filtering rule. Name: Choose a unique name. Allow: Select “Permit” or “Deny”. IP Address: Input the IP addresses that you want permitted or denied. Netmask: Use this along with “IP Address” to specify a range of IP Addresses associated with this Access Lists rule . Route Map Route maps provide a means to filter and/or apply actions to routes, allowing policies to be applied to routes. Route maps define rules for transf erring between different routing protocols. Each statement in a route map is ordered. Once there is a match to a statement, the statement is executed and the scan terminates. Click Add to create a new route map. • Name: Choose a unique name. • Allow: Select “ Permit” or “Deny”. • Order: Input a number to set the order of this policy.

247. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 245 SNMPv3: SNMP version 3 includes all prior features with security available. SNMPv3 is the most secure setting for SNMP. If you wish to configure traps then you must use SNMP version 3. Get community string: The “Get community string” is used to read SNMP information from the router. This string is like a password that is transmitted in regular text with no protection. Set community string: The “Set community string” is used when writing SNMP settings to the router. This string is like a password. It is a good idea to make it different than the “Get community string.” 8.7.1 SNMPv3 If you select SNMPv3, you have several additional configuration options for added security. Authentication type: Select the authentication and encryption type that will be used when connecting to the router from the following dropdown list. These settings must match the configuration used on any SNMP clients. • MD5 with no encryption • SHA with no encryption • MD5 with DES encryption • SHA with DES encryption • MD5 with AES e ncryption • SHA with AES encryption Username: Enter the Username configured on your SNMP host in the username field. Password: Enter the Password for your SNMP host in the password and verify password fields. This password must be at least 8 characters long. Enable SNMP traps: Enabling traps will allow you to configure a destination server, community, and port for trap notifications. Trap notifications are returned to the server with SNMPv1.

260. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 258 • Spyware: A type of malware that is designed to spy on the victim's activities, capturing sensitive data such as the person's passwords, online shopping, and screen contents. One popular type of spyware, a keylogger, is optimized for logging the victim's keyboard activity and transmitting the captured information to the remote attacker. Mbps Megabits per second. MDI Medium Dependent Interf ace . A n Ethernet port for a connection to a straight - through cable. MDIX Medium Dependent Interface Crossover . A n Ethernet port for a connection to a crossover cable. MIB Management Information Base . A set of objects that can be managed by using SNMP. Modem A device that m odulates digital signals from a computer to an analog signal in order to transmit the si gnal over phone lines. It also d emodulates the analog signals coming from the phone lines to digital signals for your computer. MPPE Microsoft Poin t - to - Point Encryption . U sed to secure data transmissions over PPTP connections. MTU Maximum Transmission Unit . T he largest packet that can be transmitted on a packet - based network like the Internet . Multicast Sending data from one device to many devices on a network. NAT Network Address Translation . A llows many private IP addresses to connect to the Internet , or another network, through one IP address. NetBEUI NetBIOS Extended User Interface . A Local Area Network communication protocol. This is an updated v ersion of NetBIOS. NetBIOS Network Basic Input/Output System. Netmask Determines what portion of an IP address designates the Network and which part designates the Host. Network Interface Card NIC. A card installed in a computer or built onto the motherboa rd that allows the computer to connect to a network.

12. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 10 Cradlepoint products with the - EU SKUs enable and disable WiFi c hannels to comply with EU law. The - EU SKUs are required for use in Eur ope for products with 5 GHz WiFi, but these products are not legal for use i n North America. See: http ://en.wikipedia.org/wiki/List_of_WLAN_channels . MBR140 0LP2 - EU 4G LTE/HSPA+ for Europe Technology: LTE, HSPA+ Downlink Rates: LTE 100 Mbps, HSPA+ 21.1 Mbps (theoretical) Uplink Rates: LTE 50 Mbps, HSPA+ 5.76 Mbps (theoretical) Frequency Band s : • LTE (800/900/1800/2100/2600 MHz ) • HSPA+ /UMTS ( 900/2100 MHz) • EDGE/GPRS/GSM ( 900/1800/1900 MHz) Module Power: LTE 23 +/ − 1 dBm, UMTS 23 +/ − 1 dBm (typ ical conducted) Module: Sierra Wireless MC771 0 Module Antennas: t wo SMA male (plug), 1 dBi ( LTE), 2 dBi (Cellular/PCS) gain; finger tighten only ; support for GPS on aux connection GPS: standalone GPS support Industry Standards & Certs: CE, GCF - CC Modem Part Number: MC200LP 2

253. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 251 Application layer 7th Layer of the OSI model. Provides services to applications to ensure that they can communicate properly with other applications on a network. ASCII American Standard Code for Information Inte rchange. This system of characters is most commonly used for text files. Attenuation The loss in strength of digital and analog signals. The loss is greater when the signal is being transmitted over long distances. Authentication To provide credentials, li ke a Password, in order to verify that the person or device is really who they are claiming to be. Automatic Private IP Addressing APIPA. An IP address that a Windows computer will assign itself when it is configured to obtain an IP address automatically b ut no DHCP server is available on the network. Backward Compatible The ability for new devices to communicate and interact with older legacy devices to guarantee interoperability. Bandwidth The maximum amount of bytes or bits per second that can be transmi tted to and from a network device. Basic Input/Output System BIOS. A program that the processor of a computer uses to startup the system once it is turned on. Baud Data transmission speed. Beacon A data frame by which one of the stations in a Wi - Fi network periodically broadcasts network control data to other wireless stations. Bit rate The amount of bits that pass in given amount of time. Bit/sec Bits per second. BOOTP Bootstrap Protocol. Allows for computers to be booted up and given an IP address with no user intervention. Bottleneck A time during processes when something causes the process to slowdown or stop all together. Broadband A wide band of frequencies available for transmitting data.

149. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 1 47 Failback Configuration (Advanced) This is used to configure failback, which is the ability to go back to a higher priority WAN interface if it regains connection to its network. Usage: Fail back based on the amount of data passed over time. This is a good setting for when you have a dual - mode EVDO/WiMAX modem and you are going in and out of WiMAX coverage. If the router has failed over to EVDO it will wait until you have low data usage before bringing down the EVDO connection to check if a WiMAX connection can be made. • High (Rate: 80 KB/s. Time Period: 30 seconds.) • Normal (Rate: 20 KB/s. Time Period: 90 seconds.) • Low (Rate: 10 KB/s. Time Period: 240 seconds.) • Custom (Rate range: 1 - 100 KB/s. Time Period range: 10 - 300 seconds.) Time: Fail back only after a set period of time. (Default: 90 seconds. Range: 10 - 300 seconds.) This is a good setting if you have a primary wired WAN connection and only use a modem for failover when your wired connection goes down. This ensures that the higher priority interface has remained online for a set period of time before it becomes active (in case the connection is dropping in and out, for example). Disabled: Deactivate failback mode. Immediate Mode : Fail back immediately whenever a higher priority interface is plugged in or when there is a pr iority change . Immediate failback returns you to the use of your preferred Internet source more quickly which may have advantages such as reducing the cost of a failover data plan, but it may cause more interruptions in your network than Usage or Time modes.

256. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 254 computer or by a router that supports Dynamic DNS, whenever the IP address changes. Dynamic IP address IP address that is assigned by a DHCP server and that ma y change. Cable Internet providers usually use this method to assign IP addresses to their customers. EAP Extensible Authentication Protocol. Email Electronic Mail is a computer - stored message that is transmitted over the Internet . Encryption Converting da ta into cyphertext so that it cannot be easily read. Ethernet The most widely used technology for Local Area Networks. Exploit Code that is designed to take advantage of a vulnerability. An exploit is designed to give an attacker the ability to execute add itional malicious programs on the compromised system or to provide unauthorized access to affected data or application. Fiber optic A way of sending data through light impulses over glass or plastic wire or fiber. File server A computer on a network that s tores data so that the other computers on the network can all access it. File sharing Allowing data from computers on a network to be accessed by other computers on the network with different levels of access rights. Firewall A security program that filters inbound and outbound network connections. In some ways you can think of a firewall as a virtual traffic cop, determining which traffic can go through the firewall. Almost all computers today come with firewall software installed. In addition, firew alls can be implemented as network devices to filter traffic that traverses through them. Firmware Programming that is inserted into a hardware device that tells it how to function. Fragmentation Breaking up data into smaller pieces to make it easier to st ore. FTP File Transfer Protocol. Easiest way to transfer files between computers on the Internet . Full - duplex Sending and Receiving data at the same time.

271. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 269 DETAILS • 2.412 to 2.484 GHz Wi - Fi frequency band o peration • Compliant with IEEE 802.3 and 3u Standards • Supports OFDM and CCK m odulation • Supports Cable/DSL modems with Dynamic IP, S tatic IP, PPPoE, PPTP, or L2TP connection t ypes • Traffic Control, Port Forwarding, Virtual Server (max 32 serve rs) and DMZ • Compatible with HSPA, EVDO, LTE, & WiMAX cellular network d evices • Easy management via HTTP and remote m anagement via HTTP and SNMP • Create, manage, and terminate up t o 20 IPs ec VPN s essions • Supported VPN i mplementations: Cradlepoint to Cradlepoint , Cradlepoint to Cisco/Links ys Routers , and Cradlepoint to Linux Systems . • Tunnel (default) and Transfe r (a.k.a. Transport) Modes • Hash a lgorithms (hardware accelerated) - MD5, SHA128, SHA256, SHA384, SHA512 • Cipher a lgorithms (hardware accelerated) - AES, 3DES, DES • Keyin g – automatic using IKE 1.0 or m anual • Authentication method: pre - shared k ey

130. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 128 Ethernet Port Configuration Ethernet Port Configuration provides controls for your router’s Ethernet ports. There are five total ports: one blue port and four numbered orange ports. While default settings wil l be sufficient in most circumstances, you have the ability to control: Mode (WAN or LAN) and Link Speed . Additional controls for WAN ports are available in Internet → Ethernet Settings . Mode : WAN or LAN . Default setting is WAN (Wide Area Network) for the blue port and LAN (Local Area Network) for the four orange ports. • Internet ( WAN ) is used to connect to another network such as a hotel or office wired network. The WAN connection is used as a possible s ource of Internet for the MBR1400. • Local Network ( LAN ) is for connecting a computer or similar device directly to the router with an Ethernet cable. Link Speed : Default setting is Auto. The Auto setting is preferred in most cases. • Auto • 10Mbps - Half Dupl ex • 10Mbps - Full Duplex • 100Mbps - Half Duplex • 100Mbps - Full Duplex • 1000Mbps - Full Duplex

191. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 189 7.9.3 Certificate Settings Generate or upload certificates for OpenVPN. If the Configuration Mode is set to Simple , you have the option to set the TLS - Auth Key . If the Configuration Mode is set t o Advanced , set any of the following: • Root Certificate • Client Certificate • Client Key • TLS - Auth Key • DH Parameters

241. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 239 8.5.1 Simple Mode Settings Display: This section allows you to choose if a "Terms of Use" page will be given to the user connecting to the hotspot. • Internal Terms of Use. Fill in your own terms of use. • External Terms of Use. Specify a URL that has the Terms of Use page. Users will automatically be directed to this page. • No Terms of Use. Redirect Only. Redirection on Successful Authentication : Depending on your choice for the “Terms of Use” page, your have further options for where the user will be directed. After the user accepts the terms, you can either let him/her continue to the URL they were trying to reach or you can force the user to go to a specified URL once before continuing on. • To the URL the user intended to visit. • To an administrator - defined URL. Redirect URL: If you have chosen to send users to an administrator - defined URL, you will need to specify the address. Session Timeout: ( Default: 60 minutes.) The amount of time the user may use the router before being forced to authenticate again. Idle Timeout: (Default: 15 minutes.) If the user is idle for this amount of time, make them re - authenticate. Bandwidth (upload): (Default: 512 Kbits/sec.) The data rate limit for users uploading data through the hotspot. Bandwidth (download): (Default: 1024 Kbits/sec.) The data rate limit for user s downloading data through the hotspot.

262. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 260 Physical layer The first layer of the OSI model. Provides the hardware means of transmitting electrical signals on a data carrier. Ping A utility prog ram that verifies that a given Internet address exists and can receive messages. The utility sends a control packet to the given address and waits for a response . PoE Power over Ethernet . T he means of transmitting electrici ty over the unused pairs in a category 5 Ethernet cable. POP3 Post Office Protocol 3 . U sed for receiving email. Port A logical channel endpoint in a network. A computer might have only one physical channel (its Ethernet channel) but can have multiple ports (logical channels) each identified by a number. PPP Point - to - Point Protocol . U sed for two computers to communicate with each over a serial interface, like a phone line. PPPoE Point - to - Point Protocol over Ethernet . U sed to connect multiple computers to a r emote server over Ethernet. PPTP Point - to - Point Tunneling Protocol . U sed for creating VPN tunnels over the Internet between two networks. Preamble Used to synchronize communication timing between devices on a network. QoS Quality of Service. RADIUS Remote Authentication Dial - In User Service . A llows for remote users to dial into a central server and be authenticated in order to access resources on a network. Reboot To restart a computer and relo ad it s operating software or firmware from nonvolatile storage. Rendezvous Apple’s version of UPnP, which allows for devices on a network to discover each other and be connected without the need to configure any settings. Repeater Retransmits the signal of an access p oint in order to extend its coverage. RIP Routing Information Protocol . U sed to synchronize the routing table of all the routers on a network.

263. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 261 RJ - 11 The most commonly used connection method for telephones. RJ - 45 The most commonly used connection method for Ethernet. RS - 232C The interface for serial commun ication between computers and other related devices. RSA Algorithm used for encryption and authentication. Server A computer on a network that provides services and resources to other computers on the network. Session key An encryption and decryption key t hat is generated for every communication session between two computers. Session layer The fifth layer of the OSI model which coordinates the connection and communication between applications on both ends. Simple Mail Transfer Protocol Used for sending and receiving email. Simple Network Management Protocol Governs the management and monitoring of network devices. SIP Session Initiation Protocol. A standard protocol for initiating a user session that involves multimedia content, such as voice or chat. SMTP S imple Mail Transfer Protocol. SNMP Simple Network Management Protocol. Social Engineering A psychological attack used by cyber attackers to deceive their victims into taking an action that will place the victim at risk. For example, cyber attackers may tri ck you into revealing your password or fool you into installing malicious software on your computer. They often do this by pretending to be someone you know or trust, such as a bank, company or even a friend. SOHO Small Office/Home Office. Spam Unwanted or unsolicited emails, typically sent to numerous recipients with the hope of enticing people to read the embedded advertisements, click on a link or open an attachment. Spam is often used to convince recipients to purchase illegal or questionable products a nd services, such as pharmaceuticals from fake companies. Spam is also often used to distribute malware to potential victims.

68. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 66 5.7.7 WiFi as WAN Diagnostics • Connection State (connected, idle, etc.) General Information • Product Wireless As WAN • Unique Identifier • Type wwan IP Information • Netmask • IP Address • Gateway

220. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 218 8.1.4 Remote Ma nagement Allows a user to enable incoming WAN pings or to change settings for the router from the Internet using the router's Internet address. Allow WAN pings: When enabled the functionality allows an external WAN client to ping the router. Allow Remote Web Administration: When remote administration is enabled it allows access to these administration web pages from the Internet . With it disabled, you must be a client on the local network to access the administration website. For security, rem ote access is usually done via a non - standard http port. Additionally, encrypted connections can be required for an added level of security. • Require HTTPS Connection : Requiring a secure ( https ) connection is recommended. • HTTP Port: Default: 8080. This opt ion is disabled if you select “Require Secure Connection”. • Secure HTTPS Port: Default: 8443. NOTE: You can restrict remote access to only specified IP addresses in Network Settings → Firewall under Remote Administration Access Control. Allow Remote SSH Acc ess : This will enable SSH access to the router from the Internet. It is only available when the SSH access is enabled in the Local Management tab. Some Carriers block the remote SSH Access ports. If a ping to the router's WAN port does not work, it is unlikely that remote SSH Access will work.

45. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 43 4.6 IP Passthrough Setup You can quickly enable IP p assthrough with the IP Passthrough Setup Wizard availabl e under Getting Started → IP Passthrough Setup . IP p assthrough takes a 3G/4G WAN data source (USB, Expre ssCard, or Cradlepoint business - grade modem) and passes the IP address through to Ethernet LAN. Using this function requires many changes to your router configuration. The IP Passthrough Setup Wizard will automatically make these changes for you: simply read through the wizard and select Enable IP Passthrough on the second page. For further configura tion options, see Network Settings → WiFi / Local Networks . Review the list of changes to ensure they are compatible with your router needs: • All Ethernet ports will be set to LAN (i.e. you cannot use Ethernet as an Internet source for your router). • All WA N devices will have Load Balance disabled and the highest priority device will be used. • All network groups except the primary network group will be removed. • All wireless interfaces will be removed from the primary network group. (It is possible to have a w ireless interface associated with another network.) • All router - based VPN and GRE services will be disabled. • The Routing Mode will be set to IP Passthrough. ( Network Settings → Local Networks in the “Local Network Editor” under “IP Settings”) • The Subnet Se lection Mode will be set to "Automatically Create Subnet" . ( Network Settings → Local Networks in the “Local Network Editor” under “IP Settings” – this shows once IP Passthrough is set as the Routing Mode) Any Ethernet WAN connections sh ould be disconnecte d before IP p assthrough is enabled.

157. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 155 6rd Tunnel IPv6 Rapid Deployment (6rd) is a method of IPv6 site configuration derived from 6to4. It is different from 6to4 in that the ISP provides explicit 6rd infrastructure that handles the IPv4 ↔ IPv6 translation within the ISP network. 6rd is considered more reliable than 6to4 as the ISP explicitly maintains infrastructure to support tunneled IPv6 traffic over their IPv4 network. • 6rd Prefix – The 6rd prefix and prefix length should be supplied by your ISP. • IPv4 Border Router Add ress – This address should be supplied by your ISP. • IPv4 Common Prefix Mask – Input the number of common prefix bits that you can mask off of the WAN's IPv4 address. • Primary IPv6 DNS Server – (optional) Depending on your provider, this may be required . Thi s o nly takes effect if the default global DNS setting on the Network Settings → DNS page is "Automatic". • Additional IPv6 DNS Server – Secondary DNS server. • Delegated IPv6 Network – (optional) Network available for delegation to LANs. Depending on your pro vider, this may be required . Prefixes specified here only take effect if those supplied by the connection are insufficient to configure your LANs. • Delegated IPv6 Network – Additional network available for delegation to LANs .

264. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 262 Spear Phishing Spear phishing describes a type of phishing attack that target s specific victims. But instead of sending out an ema il to millions of email addresses, cyber attackers send out a very small number of crafted emails to very specific individuals, usually all at the same organization. Because of the targeted nature of this attack, spear phishing attacks are often harder to detect and usually more effective at fooling the victims. SPI Stateful Packet Inspection. SSH Secure Shell . A command line interface that allows for secure connections to remote computers. SSID Service Set Identifier . A name for a wireless network. Stateful Packet Inspection A feature of a firewall that monitors outgoing and incoming traffic to make sure that only valid responses to outgoing requests are allowed to pass though the firewall. Subnet mask Determines what portion of an IP address designa tes the Network and which part designates the Host. Syslog System Logger . A distributed logging interface for collecting in one place the logs from different sources. Originally written for UNIX, it is now available for other operating systems, including W indows. TCP Transmission Control Protocol. TCP Raw A TCP/IP protocol for transmitting streams of printer data. TCP/IP Transmission Control Protocol/ Internet Protocol. TFTP Trivial File Transfer Protocol . A utility used for transferring files that is simple r to use than FTP but with fewer features. Throughput The amount of data that can be transferred in a given time period. Traceroute A utility that displays the routes between you r computer and a specific destination. UDP User Datagram Protocol. Unicast Com munication between a single sender and receiver. Update To install a more recent version of a software or firmware product.

5. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 3 1 INTRODUCTION 1.1 Package Contents • Cradlepoint Mission - Critical Broadband Router (MBR1400) • AC power adapter (12V, 1.5A) WARNI N G: using a power adapter other than the o ne provided may damage the MBR14 0 0 and will void the warranty • Three 2.4 GHz high performance 802.11n a ntennas • Mounting h ardware • CAT5 Ethernet c able • Setup Guide • ARC S eries with integrated 3G/4G business - grade m odem*** o ARC MBR1400 LE - VZ – 4G LTE / EVDO for Verizon o ARC MBR1400LP - AT – 4G LTE / HSPA+ for AT&T o ARC MBR1400LP2 - EU – 4G LTE / HSPA+ for Europe o ARC MBR1400LP – 4G LTE / HSPA+ for Canada o ARC MBR1400 W – 4G WiMAX for Sprint or C LEAR Discontinued : o MBR1400 E - VZ – 3G EVDO for Verizon o MBR1400 E - SP – 3G EVDO for Sprint 1.2 System Requirements • At least one Internet source: a Cradlepoint 3G/4G business - grade m odem , an E thernet - based modem , a broadband data modem with active s ubscr iption (USB, ExpressCard ), or WiFi as WAN. • Windows 2000/XP/7 , Mac OS X, or Linux c omputer ( with Wi Fi a dapter — 802.11n r ecommended — for WiFi functionality ) . • Internet Explorer v6.0 or higher, Firefox v2.0 or higher, Safari v1.0 or higher .

133. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 131 6.8.4 WiFi Settings (Advanced) When you select the Wireless (WiFi) Networks Settings tab in the Local Network Interfaces section, you have several additional options for configuring your wireless LANs under the WiFi Settings heading. WiFi band: Select the range of frequencies the router will use. The MBR1400 can o perate in either the 2.4 GHz or the 5.0 GHz ranges. (Default: 2.4 GHz. The included WiFi antennas are 2.4 GHz. 5 GHz antennas are available as an accessory.) Channel Selection Method : This controls how a WiFi channel is selected. • User Selection. Manually set the channel. • Random Selection. The router r andomly sets the channel. • Smart Selection (Default). Scans to determine the lowest interference WiFi channel. Channel Selection Schedule: When using the "Smart" channel selection, this controls whe ther the router will periodically rescan for a better channel and change to it. Select from “Once,” “Daily,” “Weekly,” or “Monthly.” Note that there may be a momentary WiFi disconnection while the channel changes. Optimize WiFi/WiMAX coexistence: (Shows i f Smart Selection or Random Selection is chosen and the WiFi Band is 2.4 GHz.) Setting this will lessen any possible conflict with WiFi in the 2.4 GHz band and an attached WiMAX modem. If a WiMAX modem is attached to the router when the WiFi is enabled, th e WiFi channel and transmit power will be set to levels that optimize the performance of the WiMAX modem. If no WiMAX modem is attached, then default channel and power settings will be used even if this is selected.

146. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 144 7.1.2 Device Configuration Clicking on a device reveals the following information: • State (Connected, Available, etc.) • Port • UID (Unique identifier. This could be a name or number/letter combination.) • IP Address • Gateway • Netmask • Stats : bytes in, bytes out • Uptime (in seconds) Click “ Edit ” to view configuration options for the s elected device. For USB or ExpressCard modems, click “Control” to view options to activate or update the device.

187. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 185 Click Add to create a new NHRP interface. • Enabled : Enable or disable the interface. • Name : Give the interface a unique name that matches the mGRE (multipoint GRE) tunnel. Select from configured GRE tunnels or input manually. • Peer Authentication : Embeds the secret pl aintext password to outgoing NHRP packets. Incoming NHRP packets on this in terface are discarded unless this password is present. Max length: 8 characters. • Holding Time : Specifies the holding time for NHRP registration requests and resolution replies. • Shor tcut - Destination : Reply with authoritative answers on NHRP resolution requests destined to addresses in this interface (instead of forwarding the packets). • Non - Caching : Disables caching of peer information from forwarded NHRP resolution reply packets. • Shor tcut : Enable creation of shortcut routes. • Redirect : Enable se nding of proprietary enterprise - style NHRP traffic indication packets.

230. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 228 apn : Set the APN on the modem (for SIM - based modems)* • Syntax: <password>,apn,<new APN>,[port , ] • Example: 1234,apn, myapn@apn.com , //set APN of highest priority modem • Example: 1234,apn, myapn@apn.com ,usb1, //set APN for modem in port usb1 userpass : Set the modem's authentication username and password* • Syntax: <password>,userpass,<username>,<userpassword>,[port , ] • Example: 1234,userpass,joe,mypassword, //set information of highest priority modem • E xample: 1234,userpass,joe,mypassword,usb3, //set information on modem in port usb3 simpin : Set the SIM's PIN* • Syntax : <password>,simpin,<pin>,[port, ] • Example: 1234,simpin ,5678, //set simpin in highest priority modem • Example: 1234,simpin,567 8,usb2 //set simpin in modem on port usb2 log: Return a portion of the router log • Syntax: <password>,log,[start, ] • Example: 1234,log, //return the first 10 items of the log (items 0 through 9) • Example: 1234,log,10, //return items 10 through 1 9 of the log • Example: 1234,log,20, //return items 20 through 29 of the log Sending log information via SMS messages likely results in several resulting texts. Please be aware of the costs of text messages on the modem’s account , and use this command only if necessary . * The “port” parameter is opt ional. It specifies which port to perform the action on . If not given, the action will happen on the highest priority modem.

152. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 150 Enable IPv6 and select the desired IPv6 connection method for this WAN interface. • Disabled (default) – IPv6 disabled on this interface. • Auto – IPv6 wil l use automatic connection settings (if available). • Static – Input a specific IPv6 address for your WAN connection. This is provided by the ISP if it is supported. • 6to4 Tunnel ( http://en.wikipedia.org/wik i/6to4 ) – Encapsulates the IPv6 data and transfers it to an automatic tunnel provider (if your ISP supports it). • 6in4 Tunnel ( http://en.wikipedia.org/wiki/6in4 ) – Encapsulates the IPv6 data and sends it to the configured tunnel provider. • 6rd T unnel (IPv6 rapid deployment: http://en.wikipedia.org/wiki/IPv6_rapid_deployment ) – Encapsulates the IPv6 data and sends it to a relay server provided by your ISP. When you configure IPv6, you have the option to designate DNS Servers and Delegated Networks . Because of the dual - stack setup, these settings are optional: when configured for IPv6, the router will fall back to IPv4 settings when necessary. DNS Servers Each WAN device is required to connect IPv4 before connecting IPv6 . Because of this, DNS servers are optional, as most IPv4 DNS servers will respond with AAAA records ( 128 - bit IPv6 DNS record s , most commonly used to map hostnames to the IPv6 address of the host ) if requested. If no IPv6 DNS servers are configured , the system will fall back to the DNS servers provided by the IPv4 configuration. Delegated Networks A delegated network is an IPv6 network that is inherently provided by or cl osely tied to a WAN IP configuration. The IPv6 model is for each device to have end - to - end IP connectivity without relying on any translation mec hanism. In order to achieve this, each client device on the LAN network needs to have a publicly rout able IPv6 address.

244. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 242 8.6 Serial Redirector A single USB Serial device can be used to establish a serial link t o a host port on the router. The USB Serial device can also be accessed by running "serial" from an SSH session. 8.6.1 Telnet to Serial Configuration Enabled: Enabling Telnet to Serial will start a Telnet server that passes its connection to the serial adapter. Enabling this service is not necessary when accessing serial through SSH. LAN : Enable serial redirector for LAN connections. Authenticated LAN: Enable serial redirector fo r Authenticated LAN connections. Y ou must be logged into the router to use the redi rector. WAN: Enable serial redirector for WAN connections. Server Port: Enter a port number for the redirector to use. (Default: 7218) 8.6.2 USB Serial Adapter Configuration Baud Rate: Select from the dropdown list. • 50 • 75 • 110 • 134 • 150 • 200 • 300 • 600

254. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 252 Broadcast Transmitting data in all directions at once. Browser A program that allows you to access resources on the web and provides them to you graphically. Cable modem A device that allows you to connect a computer up to a coaxial cable and receive Internet access from your Cable provider. CardBus A newer version of the PC Card or PCMCIA interface. It supports a 32 - bit data path, DMA, and consumes less voltage. CAT 5 Category 5. Used for 10/100 Mbps or 1Gbps Ethernet connections. Client A program or user that requests data from a server. Collision When do two device s on the same Ethernet network try and transmit data at the exact same time. Cookie Information that is stored on the hard drive of your computer that holds your preferences to the site that gave your computer the cookie. Data Information that has been tra nslated into binary so that it can be processed or moved to another device. Data Encryption Standard Uses a randomly selected 56 - bit key that must be known by both the sender and the receiver when information is exchanged. Data - Link layer The second layer of the OSI model. Controls the movement of data on the physical link of a network. Database Organizes information so that it can be managed updated, as well as easily accessed by users or applications. DB - 25 A 25 - pin male connector for attaching External modems or RS - 232 serial devices. DB - 9 A 9 - pin connector for RS - 232 connections dBd Decibels related to dipole antenna. dBi Decibels relative to isotropic radiator. dBm Decibels relative to one milliwatt.

36. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 34 Choose a personalized WPA PASSWORD or WEP KEY . This password will be used to conne ct devices to the router’s WiFi broadcast once the security settings have been saved. • WPA Password: The WPA Password must be between 8 and 64 characters long. A combination of upper and lower case letters along with numbers and special characters is recom mended to prevent hackers from gaining access to your network. • W EP K ey: A WEP Key must be either a hexadecimal value of 5 or 13 characters or a text value of 10 or 26 characters. Click NEXT . 7) Configuring Your Access Point Name (APN) : If you are using a SIM - based modem (LTE/GSM/HSPA) with your Cradlepoint router , you may need to configure the APN before it will properly connect to your carrier. Wireless carriers offer several APNs, so check with your carrier to confirm the appropriate one to use. Some exa mples include: • AT&T: "broadband" • T - Mobile: "epc.tmobile.com" • Rogers LTE: "lteinternet.apn" • Bell: "inet.bell.ca" • TELUS: "isp.telus.com" You can either leave this on the Default setting or select Manual and input a specific APN. If your sp ecific modem or SI M already has APNs programmed into it , you should lea ve this on the Default setting. A fter finishing this Wizard go to Internet → Connection Manager , select your modem, and edit the settings. The SIM PIN/APN tab has more available settings than are provide d here.

216. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 214 Advanced Security Mode When yo u enable Advanced Security Mode , you have three different options for the Authentication Mode : • Local Users • TACACS+ • RADIUS Local Users Create users with administrative privileges by inputting usernames and passwords in the Advanced User Management table. The default username is “admin,” but you can edit this name, or delete it once you create other users (you can’t delete the user you are currently signed in as). In TACACS+ and RADIUS modes, if the servers cannot be reached, either because the WAN is dow n or a response is not received within the selected Server Timeout , the router will automatically fall back to using Local Users mode to prevent any potential of being locked out. TACACS+ TACACS+ stands for “Terminal Access Controller Access - Control Syste m plus”. The router will use a TACACS+ server (or two, optionally) to authorize administration. Server Timeout : If the servers are not reached within the set time (possibly because the WAN is down), the router will automatically fall back to using Local Us ers mode to prevent users from being locked out. Authentication Service : Choose from: • ASCII / Login

257. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 255 Gain The amount an amplifier boosts the wireless signal. Gateway A device that connects you r network to another, like the Internet . Gbps Gigabits per second. Gigabit Ethernet Transmission technology that provides a data rate of 1 billion bits per second. GUI Graphical user interface. H.323 A standard that provides consistency of voice and video transmissions and compatibility for video conferencing devices. Half - duplex Data cannot be transmitted and received at the same time. Hashing Transforming a string of characters into a shorter string with a predefined length. Hexadecimal Characters 0 - 9 and A - F. Hop The action of data packets being transmitted from one router to another. Host Computer on a network. HTTP Hypertext Transfer Protocol is used to transfer files from HTTP servers (web servers) to HTTP clients (web browsers). HTTPS HTTP over SSL is used to encrypt and decrypt HTTP transmissions. Hub A networking device that connects multiple devices together. ICMP Internet Control Message Protocol. IEEE Institute of Electrical and Electronics Engineers. IGMP Internet Group Management Protocol is use d to make sure that computers can report their multicast group membership to adjacent routers.

258. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 256 IIS Internet Information Server . A W eb and FTP server provided by Microsoft. IKE Internet Key Exchange . U sed to ensure security for VPN connections. Infrastructu re In terms of a wireless network, this i s when wireless clients use an a ccess p oint to gain access to the network. Internet A system of worldwide networks that use TCP/IP to allow for resources to be accessed from computers around the world. Internet Expl orer A World Wide Web browser created and provided by Microsoft. Internet Protocol The method of transferring data from one computer to another on the Internet . Internet Protocol Security IPsec provides security at the packet processing layer of network communication. Internet Service Provider An ISP provides access to the Internet to individuals or companies. Intranet A private network. Intrusion Detection A type of security that scans a network to detect attacks coming from inside and outside of the net work. IP Internet Protocol. IP address A 32 - bit number, when talking ab out Internet Protocol Version 4, which identifies each compu ter that transmits data on the Internet or on an i ntranet. IPsec Internet Protocol Security. IPX Internet work Packet Exchange is a networking protocol developed by Novell to enable their Netware clients and servers to communicate. ISP Internet Service Provider. Java A programming language used to create programs and applets for web pages. Kbps Kilobits per second.

186. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 184 7.8 NHRP Configuration NOTE: NHRP Configuration requires a feature license and hardware version 2.0. Go to Syst em Settings → Feature Licenses to enable this feature . Next Hop Resolution Protocol is a protocol used to discover addresses of clients on Non - Broadcast Multiple Access (NBM A) networks. It is used to create next - generation VPN technologies that allow shortcutting between spokes. With NHRP, systems attached to an NBMA network dynamically learn the NBMA address of the other systems that are part of that network, allowing these systems to directly communicate without requiring an intermediate hop. The NHRP Supported Interfaces table displays the following fields for each configured NHRP interface. • Name : Name of the GRE tunnel that NHRP will use. • Protocol Address/Prefix : GRE tunn el endpoint mapping that NHRP associates with the NBMA server. • NBMA Address : NBMA server address the protocol address/prefix is associated with. • Flags : o SD : Shortcut - Des tination o N : Non - Caching o S : Shortcut o R : Redirect

238. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 236 8.3.1 Enterprise Cloud Manager Settings (Advanced) • Enabled: Enable the ECM client to contact the server. While this box is unchecked, the ECM client will neve r attempt to contact the server. (Default: Enabled) • Server Host:Port : The DNS hostname and port number for your ECM server. (Default: stream. Cradlepoint .com) • Session Retry Timer : How long to wait, in seconds, before starting a new ECM session following a connection drop or connectivity failure. Note that this value is a star ting point for an internal backoff timer that prevents superfluous r etries during connectivity loss. • Unmanaged Checkin Timer : How often, in seconds, the router check s with ECM to see if the router is remotely activated. Note that this value is a starting p oint for an internal backoff timer that reduces network usage over time. • Maximum Alerts Buffer : The maximum number of alerts to buffer when offline. 8.3.2 Legacy WiPipe Central Settings (Advanced) WiPipe Central is Cradlepoint ’s legacy remote management system . • Enabled: Enables the WiPipe Central client to contact the server. • Ethernet Communication Only: Select this to ensure that the WiPipe Central client will not start unless the WAN is Ethernet. • Registration URL: Register your router using the code provided by Cradlepoint when you purchase WiPipe Central.

111. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 109 Match and Set : Both of these have the following configuration options: • IP address : Input an IP address with this policy. • Metric : Numerical priority of the route. • Community : The B GP community list is a user - defined BGP communities attribute list. The BGP community list can be used for matching or manipulating BGP communities attribute in updates.The community attributes are a 32 - bit number that also has some aliases. o internet : alia s for well - known communities value 0 o no - export : alias for well - known communities value NO_EXPORT (0xffffff01) o no - advertise : alias for well - known communities value NO_ADVERTISE (0xffffff02) o local - AS : alias for well - known communities value NO_EXPORT_SUBCONFE D (0xffffff03) Match : This specifies the policy implied if the `Matching Conditions' are met or not met, and which actions of the route map are to be taken, if any. The two possibilities are: 1. Permit: If the entry matches, then carry out the `Set Actions'. Then finish processing the route map, permitting the route, unless an `Exit Action' indicates otherwise. 2. Deny: If the entry matches, then finish processing the route - map and deny the route (r eturn `deny'). Set : A route - map entry may, optionally, specify one or more `Set Actions' to set or modify attributes of the route.

232. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 230 8.1.8 System Logging Logging Level: Setting the log level controls which messages are stored or filtered out. A log level of Debug will record the most information while a log level of Critical will only record the most urgent messages. Each level includes all messages from all of the levels below it on the list (e.g. “Warning” includes all “Error” and “Critical” m essages as well). • Debug • Info • Warning • Error • Critical Enable Logging to a Syslog Server: Enabling this option will send log messages to a specified Syslog server. After enabling, type the Hostname or IP address of the Syslog server (or select from the dropdown menu). Syslog Server Address: Select the Hostname or IP address from the dropdown menu, or type this in manually. Include System ID: This option will include the router ’ s "System ID" at the begin n ing of every log message. This is oft en useful when a single remote S yslog server is handling logs for several routers. Include UTF8 Byte Order Mark: The log message is sent using UTF - 8 encoding. By default the router will attach the Unicode Byte Order Mark (BOM) to the Syslog message in compliance with th e Syslog protocol, RFC5424. Some Syslog servers may not fully support RFC5424 and will treat the BOM as ASCII text, which will appear as garbled characters in the log. If this occurs, disable this option. Log to attached USB stick: Only enable this option if instructed by a Cradlepoint support agent. This will write a very verbose log file to the root level of an attached USB stick. Please disable the feature before removing the USB stick, or you may lose some logging data. Verbose modem logging: Only enabl e this option if instructed by a Cradlepoint support agent. Create support log: This functionality allows for a quick collection of system logging. Create this log file when instructed by a Cradlepoint support agent.

166. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 164 7.1.9 WiMAX Settings WiMAX Realm: Select from the following dropdown options: • Clear – clearwire - wmx.net • Rover – rover - wmx.net • Sprint 3G/4G – sprintpcs.com • Xohm – xohm.com • BridgeMAXX – bridgeMAXX.com • Time Warner Cable – mobile.rr.com • Comcast – mob.comcast.net TTLS Authentication Mode: TTLS inner authentication protocol. Select from the following dropdown options: • MSCH APv2/MD5 (Microsoft Challenge Handshake Authentication Protocol version2/Message - Digest Algorithm 5) • PAP (Password Authentication Protocol) • CHAP (Challenge Handshake Authentication Protocol) TTLS Username : Username for TTLS authentication. TTLS Password: P assword for TTLS authentication. WiMAX Authentication Identity : User ID on the network. Leave this blank unless your provider tells you otherwise.

175. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 173 7.4.1 Data Usage Rule s The Date Usage Rule display shows basic information for each rule you have created ( including rules created with a template ) . The following info rmation is displayed: • Rule Name • Enabled: True/False • Date for Rule Reset • Cycle Type: Daily, Weekly, or Monthly • Cap: Amount in MB. • Current Usage: Shown as an amount in MB, as a percentage of the cap, and in a bar graph. Click Add to configure a new Data Usage Rule. Data Usage Rule – page 1 Rule Name: Give your rule a name for later recognition. WAN Selection: Select from the dropdown list of currently attached WAN devices. Assigned Usage in MB: Enter a cap amount in megabytes. 1 024 megabytes equals 1 gigabyte. Rule Enabled: (Default: Enabled.) Click to disable. Use with Load Balancing: When checked, the Load Balancing feature is allowed to use the thresholds and metrics of this rule when making balance decisions. This causes Load Balancing to spread the data usage between interfaces according to the assigned usage rather than bandwidth. This is a best effort to

28. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 26 3.3.2 Your USB or ExpressCard m odem does not w ork with the r outer • If your USB data or ExpressCard is not working with the router, check the list of supported devices at http://www. Cradlepoint .com/modems to ensure you are using a supported dev ice and carrier. The device you a re using must be supported on the carrier network providing your cellular service or it’s considered an unsupported device, even if it is supported on another carrier’s network. • Sometimes a USB data modem needs to be updated or have other configurations set correctly in order to make a connection t hrough the router. If your USB m odem has not been updated recently, it is recommended that you do so if it is having trouble connecting to the MBR 14 00 . I nsert your USB data mod em into your PC and access the Internet using the software provided by your cellular carrier . Follow the directions provided to complete the update. Once you have updated your USB data modem, reconnect the cellular device to your Cradlepoint router and connect to the Internet . • If you are using a WiMAX modem , you need to set the WiMAX Realm. This can be done i n the a dministration p age s . L og in using the hostname “ cp/ ” or IP address “ http://192.168.0.1 ” in your browser . Go to Internet → Connection Manager . In the WAN Interfaces section, select your modem and click “Edit.” Select the WiMAX Settings tab and select/input your WiMAX Realm . • Some wireless carriers provide more than one Access Point Name (APN) that a modem can connect to. If you wish to spe cify the APN, this can be done i n the administration pages. Log in using the hostname “ cp/ ” or IP address “ http://192.168.0.1 ” in your browser . Go to Internet → Connection Manager . In the WAN Interfaces section, select your modem and click “Edit.” Select the SIM/APN Settings tab. There is an Access Point Name field: Set the APN and click Submit . Some APN examples are isp.cingular , ecp.tmobile.com , and vpn.com . The modem must be rem oved and reinserted (or the router must be rebooted) for this change to take effect. • If the above issues have been resolved and you can con nect to the router but you can not get Internet through it using your modem , you may need to upgrade the router firmware. Use your computer (you may need to plug your modem directly into your computer if you don’t have another way to access the Internet ) to download the latest firmware for the router at http://www. Cradlepoint .com/firmware/MBR1400 . Then log in to the router a dmin istration

58. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 56 5.7.1 Ethernet General Information • Unique Identifier wan • Model • Type e thernet • Port IP Information • DNS Servers • IP Address • Ga teway Statistics • Incoming Bytes • Outgoing Bytes • Connection Uptime (secs)

94. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 92 6.4.3 IP Filter Rules (Advanced) An "Incoming" IP filter rule restricts remote access to computers on your local network. "Outgoing" filter rules prevent computers on your local network from initiating communication to the address range specified in the rule. This feature is especially useful when combined with port forwarding and/or DMZ to restrict remote access to a specified host or network range. For example, in order to host a server you might have opened ports with a port forwarding rule that could expose your LAN to cyber attacks. With an incoming IP filter rule, you can restrict the access to your LAN to only known devices. • Name: Name your rule. • Enabled: Selected by default. • Log : When checked each packet matching this filter rule will be logged in the System Logs. • Action: “Allow” or “Deny” • Protocol: Any, ICMP, TCP, UDP, GRE, ESP, or SCTP. IP Source / IP Destination • IP Negation: Match on any IP address that is NOT in the specified IP network range. • Network IP: Optional field to specify a matching network IP address for this rule to match against. • Netmask: Use this to define a subnet size this rule will match against.

193. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 191 7.10.1 Page 1: General Tunnel Name : Give the tunnel a name that uniquely identifies it. Anonymous Mode : Select to allow remote connections from any IP address. Responder Mode : When enabled, the router will not initiate negotiation with peers, otherwise start negotiations as soon as possible. Local Identity : Specifies the identifier sent to the remote host during phase 1 negotiation . If left blank it will default to the IP address of the WA N connection. Currently we only support identifiers in the form of an IP address , a user - fully qualified domain name (user@mydomain.com) or just a fully qualified domain name ( www.mydomain.com ). If the remote side of the tunnel is configured to expect an i dentifier, then both must match in order for the negotiation to succeed. If NAT - T is being used, a single word (instead of an address) can be used if a DynDNS connection is not being used. Remote Identity : Specifies the identifier we expect to receive from the remote host during phase 1 negotiation. If no identifier is defined then no verification of the remote peer's identification will be done. Currently we only support identifiers in the form of an IP address , a user - fully qualified domain name (user@myd omain.com) or just a fully qualified domain name ( www.mydomain.com ). If left blank we will default to the IP address of the WAN connection. If NAT - T is being used, a single word (instead of an address) can be used if a DynDNS connection is not being used. Authentication Mode : Select from Pre - Shared Key and Certificate . Pre - Shared Key is used when there is a single key common to both ends of the VPN. Certificate requires the creation of a set of certificates and a private key that can be

240. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 238 8.5 Hotspot Services Any of your networks can be enabled as a hotspot . To enable a h otspot , you need to select a network and set it as a hotspot in Network Settings → WiFi / Local Network s . NOTE: Although any network can be a hotspot, the MBR1400 allows only one hotspot. Hotspot Mode: Choose from the following dropdown options: • Simple: Allows “ Terms of Use ” page and timeout settings controlled within the router. • RADIUS/UAM: Allows you to set up external authentication servers. Local IP Network : A single LAN Group — including both WiFi and Ethernet — can be configured as your hotspot. If you do not already have a LAN Group configured as a hotspot, go to the WiFi / Local Networks page (you can click Configure to link to this page) and set the Routing Mode to "Hotspot" for the LAN Group you want to use . NOTE: Routing Mode is in the Local Network Editor under the IP Settings tab. Select a network in Network Settings → WiFi / Local Networks and click Edit to open the Local Network Editor. The IP Settings tab will already be open: the Routing Mode dropdown m enu is at the bottom. Allow Service on 3G/4G Modems: A llows you to enable or disable h otspot access to the Internet over a modem. This is often used if the router has a main wired link and a secondary modem for failover (typically with a more expensive/lim ited data plan) . Select this option if you want the router to allow data traffic over the modem if the wired connection goes down. Disable Service if Ethernet Threshold is met: This will block Hotspot use of the WAN when the threshold is met. This can be used if the router is being used as a backup failover connection to another router with a wired connection. If that other router’s wired connection goes down and it starts using this router for its primary connection, then disable Hotspot us e of the WAN co nnection. Set the limiting Rate (KB/s) and Time Period (seconds). Redirect HTTPS Requests: This allows initial requests to HTTPS websites to be redirected appropriately. Hotspot/UAM Authentication Port: Default: 8000. Type in a different port number , or us e the slider to change the port.

198. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 196 o AES 128 o AES 256 o b lowfish o Cast128 o DES o 3DES • Hash : Used to compare, authenticate, and validate that data across the VPN arrives in its intended form and to derive keys used by IPs ec. o MD5 o SHA1 o SHA2 256 o SHA2 384 o SHA2 512 • DH Groups : The DH (Diffie - Hellman) Group is a property of IKE and is used to determine the length of prime numbers associated with key generation. The strength of the key generated is pa rtially determined by the strength of the DH Group. Group 5, for instance, has greater strength than Group 2. o DH group 1: 768 - bit key. o DH group 2: 1024 - bit key . o DH group 5: 1536 - bit key . In Phase 1 , only one DH group can be selected while using A ggressive exchange mode. By default, all the algorithms (encryption, hash, and DH groups) supported by the MBR1400 ar e checked, which means they are allowed for any given exchange. Deselect these options to l imit which algorithms will be accepted. Be sure to check that the router (or similar device) at the other end of the tunnel has matching algorithms. T he algorithms are listed in order by priority. You can reorder this priority list by clicking and dragging algorithms up or down. Any selected alg orithm may be used for IKE exchange, but the algorithms on the top of the list are more likely to be used more often.

126. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 124 Wired 802.1X : (requires hardware version 2.0) This allows you to configure an authentication server that will accept authentication requests from devices attached to wire d Ethernet ports. IEEE 802.1X defines the encapsulations of the Extensible Authentication Protocol (EAP). Click Enable 802.1X to require IEEE 802.1X authorization for the Ethernet ports associated with this network . Reauthentication Period: EAP re - authentication period in seconds. Authentication settings • Auth Server IP Address: This is the IP address of the connected RADIUS server . • Auth Server MAC Address: This is the hardware address of the connected RADIUS server’s interface. NOTE: If you don’t know the MAC address for the RADIUS server, enter 00:00:00:00:00:00 and the service will try to find the MAC address from the given IP address. • Port: 1812 is common for the authentication port. • Password: Assigned by the RADIUS server. A c counting settings : Most of t he accounting settings often match the authentication settings, depending on whether the RADIUS server is the same for both authentication and accounting. • Acct Server IP Address • Acct Server MAC Address • Port: 1813 is common for t he accounting port. • Password

221. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 219 8.1.5 GPS If you have an attached device with GPS support (SIM - based models with GPS support require the SIM be inserted) , you can enable a graphical view of your router’s location which will appear in Status → GPS . Users can configure GPS NMEA GGA format sentence reporting, available through a router - based server and/or a remote server. NOTE: Some carriers disable GPS support in otherwise supported modems. If you encounter issues with obtaining a fix, contact your carrier and ensure that GPS is supported. • Enable GPS support: Enables support for querying GPS information from supported modems. • Enable GPS server on WAN: Enables a TCP server on the WAN side of the firewall , which will periodically send GPS NMEA sentences to connected clients. • Enable GPS server on LAN: Enables a TCP server on the LAN side of the firewall, which will periodically se nd GPS NMEA sentences to connected clients. o GPS server port number • Enable GPS reporting to remote server: Enables periodic reporting of GPS NMEA sentences to a remote server. The router will buffer NMEA data if errors are encountered or if th e Internet con nection goes down and send the buffered sentences when the connection is restored. o Remote server hostname or IP o Remote server port o Report only over specific time interval: Restricts the NMEA sentence reporting to a remote server to a specific time interval .

80. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 78 Click Add or Edit to open the Filter Rule Editor . • Assigned Network: Select either “All Networks ” or one of your LAN networks from the dropdown list. • Domain/URL/IP: Enter the Domain Name or URL (address) of the website you wish to control access f or , e. g . www.google.com . To make sure the full domain is blocked, ente r the most inclusive domain ( e.g . google.com will effectively block www.google.com as well as maps.google.com and images.google.com ) . Alternatively you can use an IP address , e. g . 8.8.8.8 , or address rang e written in CIDR notation, e.g. 8.8.8.0/24 . • Filter Action: Select Block or Allow . • Rule Priority: Higher number rules overrule lower number rules. • Enabled: A rule can be enabled or disabled by selecting or deselecting the checkbox. Click Submit to save your rule changes.

115. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 113 IP v4 Settings : IP Address: This is the address used by the router for local area network communication. Changes to this parameter may require a restart to computers on this network. Each network must have a distinct IP address. Most users will want an address from one of the follow ing private IP ranges: • 10.0.0.1 - 10.255.255.1 • 172 .16.0.1 - 172.31.255.1 • 192.168.0.1 - 192.168.255. 1 NOTE: The final number does not have to be 1, but it is a simple, logical convention for routers that leaves higher numbers free fo r other devices . Netmask: (Default: 255.255.255.0) The netmask controls how many IP addresses can be used in this network. The default value allows for 254 IP addresses. IPv4 Routing Mode: (Default: NAT) Each network can use a unique routing mode to connect to the Internet and other local networks. NAT is desirable for most configurations. Select from the following options in the dropdown list: • NAT: Network Address Translation hides private IP addresses behind the router's IP address. This is the simplest and most common ch oice for users, because NAT does the translation work for you. • Standard: NAT - less routing. If you select Standard , you must separately configure your IP addresses so that they will be publically accessible. Typically you will not select this option unless you have a specific reason to bypass NAT. • IP Passthrough: IP Passthrough passes the IP address given by a cellular modem (WAN) through the router to Ethernet (LAN). All Ethernet ports must be in LAN mode (or disabled) and Hotspot, VPN, and GRE must be disa bled. Any wireless interfaces must be removed from this network in order to enable IP Passthrough. The easiest way to enable IP Passthrough mode is with the IP Passthrough Setup Wizard (see Getting Started → IP Passthrough Setup ). • Hotspot: Provide Hotspot Services on this network, requiring Terms of Service or RADIUS/UAM authentication before WAN access will occur on both wireless and wired LAN connections. To enable a Hotspot you must also configure your Hotspot settings under System Settings → Hotspot Ser vices . • Disabled: Disable this network.

164. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 162 GSM Technology Auto Auto 3G Force 4G Force 3G (module auto selects) Force 2G (module auto selects) (<= 3G) LTE HSPA+ (4G/3.5G) HSPA (3G) EDGE (2.75G) GPRS (2.5G) ARC MBR1400 LP (Sierra Wireless MC7700 ) ✔ ✔ ✔ ✔ ✔ ✔ ✔ ARC MBR1400 LP2 (Sierra Wireless MC7710 ) ✔ ✔ ✔ ✔ ✔ ✔ ✔ AT Config Script: Enter the AT commands to be used for carrier specific modem configuration settings. Each command must be entered on a separate line. The command and associated response will be logged, so you should check the system log to make sure there were no errors. NOTE: AT Config Script should not be used unless told to do so by your modem's cellular provider or by a support technician. AT Dial Script: This is included for legacy devices only . Most users will not use th is option. Go to SIM/APN /Auth Settings instead if you need to select a specific Access Point Name. If you do need this option for older devices, enter the AT commands to be used in establishing a network connection. Each command must be entered on a separa te line. All command responses must include “OK” except the final command response, which must include “CONNECT”. Example: AT ATDT*99***2#

201. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 199 7.10.6 Page 6: Tunnel Summary The final page of the tunnel configuration interface is a summary of the tunnel specifications . This is especially helpful for matching this information with the router (or similar device) at the other end of the tunnel. • Tunnel Name • Mode • Initiation Mode • Pre - shared Key • Local Network • Remote Gateway • Remote Network • IKE Phase 1: o Exchange Mode o Key Lifetime (Secs ) o Encryption o Hash o DH Groups • IKE Phase 2: o PFS o Key Lifetime (Secs ) o Encryption o Hash o DH Groups • DPD Click Yes at the bottom of the Tunnel Summary page to save your configuration changes. This will cause active tunnels to restart.

245. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 243 • 1200 • 1800 • 2400 • 4800 • 9600 • 19200 Byte Size: The number of bits in a byte. Select from: 5, 6, 7, and 8. Parity: Change this value to enable parity bit checking. Select from the following dropdown options: • None: No parity checking. (Default) • Even: parity bit will always be even. • Odd: parity bit will always be odd. • Mark: parity bit will always be odd and always 1. • Space: parity bit will always be even and always 0. Stop Bits: Number of bits to initiate the stop period. Select from these dropdown values: 1, 1.5, and 2. Hardwar e (RTS/CTS): Use RTS (Request To Send) / CTS (Clear To Send) to enable flow control. Software (XON/XOFF): Use XON/XOFF to enable flow control. Linefeed : Select how you want linefeeds translated (CR = carriage return and LF = line feed) . • Ignore • CR/LF • CR • LF

63. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 61 5.7.4 WiMAX Modem (U300 – 4G) Diagnostics For a WiMAX modem, the CINR and Signal Strength values are important as they show how strong the signal is and that has significant effects on how much data the router can download or send. You can place the router in different locations to see where you get better signal. You can also see a LED display of th e current signal strength. Pressing the router's Signal Strength button will toggle the LED display on and off. • Base Station ID (BSID) • Signal Strength(dBm) • Center Frequency • Calibration Status — Don’t worry if this says the modem is not calibrated. • Modem Firm ware Version • CINR • Connection State (connected, idle, etc.) General Information • Product U300 – 4G • Protocol Ethernet Static • Unique Identifier • MAC

234. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 232 8.2 Device Alerts The Device Alerts submenu choice allows you to receive email notifications of specific system events. YOU MUST ENABLE AN SMTP EMAIL SERVER TO RECEIVE ALERTS. Alerts can be included for the following: • Firmware Upgrade Available: A firmware update is available for this device. • System Reboot Occurred : This router has rebooted. This depends on NTP being enabled and available to report the correct time. • Unrecognized MAC Address: Used with the MAC monitoring lists. An alert is sent when a new unrecognized MAC address is connected to the router. • WAN Device Status Change: An attached WAN device has changed status. The possible statuses are plugged, unplugged , connected, and disconnected. • Configuration Change: A change to the router configuration. • Login Failure: A failed login attempt has been detected. • VPN Tunnel Goes Down: Sends an alert when a VPN tunnel goes down. • Full System Log: The system log has filled . This alert contains the contents of the system log. • Recurring System Log: The system log is sent periodically. This alert contains all of the system events since the last recurring alert. It can be scheduled for daily, weekly and monthly reports ( Frequen cy ). You also choose the Time you want the Alert sent.

243. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 241 UAM Settings: • Login URL: Assigned by UAM service. • Splash Page URL: Optional URL that can point to an external page that can provide specific information to the user prior to being authenticated. The page must provide a link back to the Login URL in order for the user to be authenticated. For example - http:// lan ip address:uam port /prelogin or http://192.168.10.1:8000/prelogin. • Shared Secret: Optional, depending on the UAM service. • NAS/Gateway ID: Assigned by UAM service. 8.5.3 Allowed Hosts Prior to Authentication Adding host names to this list will allow access from your networ k to any external domain or web site prior to being authent icated. For example, a hotel might allow access to its own website prior to authentication. Click Add to enter new hostnames you wish to allow. Enter the Host or Domain Name of the website you wish to allow , i.e. www.company.com or company.com . To allow all domain and sub - domain options, use a wildcard, i.e. *.company.com. Click Submit to save your additions. 8.5.4 Authorized MAC Addresses Add the MAC addresses of trusted machines to which you want to give automatic access through the Hotspot portal.

50. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 48 5.3 Dashboard The Dashboard shows fundamental information about your router, divided into the following basic categories: • Router Information • Internet • Local Network s • WiFi Network s For more in - depth information and/or configuration options , click on the Detailed Info link beside the category title. For each category, t his links to: Router Information • System Settings → Administration Internet • Internet → Connection Manager Loc al Network s • Network Settings → WiFi / Local Networks WiFi Networks • Network Settings → WiFi / Local Networks After the initial setup of the router, every time you log in you will automatically be directed to this Dashboard . Also, you can click on the Cradlepoint logo in the upper left - hand corner to return to the Dashboard from any page .

147. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 145 7.1.3 General Settings • Enabled: Select/deselect to enable/disable. • Force NAT: Normally NAT is part of the Routing Mode setting which is selected on the LAN side in Network Settings → WiFi / Local Networks . Select this option to force NAT whenever this WAN device is being used. • Priority: This number controls failover and failback ord er. The lower the number, the higher the priority and the more use the device will get. This number will change when you move devices around with the priority arrows in the WAN Interfaces list. • Load Balance: Select to allow this device to be available for the Load Balance pool. • Download bandwidth: Defines the default download bandwidth for use in Load Balance or QoS (quality of service, or traffic shaping) algorithms. (Range: 128 Kb/s to 1 Gb/s.) • Upload bandwidth: Defines the default upload bandwidth for u se in Load Balance and QoS (quality of service, or traffic shaping) algorithms. (Range: 128 Kb/s to 1 Gb/s.) • MTU: Maximum transmission unit. This is the size of the largest protocol data unit that the device can pass. (Range: 46 to 1500 Bytes.) • Hostname ( T his only shows for certain devices.)

7. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 5 ADDITIONAL FEATURES • Dual - band WiFi, 3x3 MIMO antenna s ubsystem, removable external antennas, up to four SSIDs • Plug - and - p lay support for more than 120 broadband data modems, allowing for site - specific carrier/service selection for broadest deployment • Up to 20 concurrent VPN endpoint sessions • Compatible with Cisco, SonicWall, and other VPN termination systems • Establish continuous uptime with optimum total cost of ownership for broad deployment • Standardized platform and centralized remote management • Simple to install, configure , and maintain with minimal impact on IT • Virtual LAN capabilities • Data Usage section that allow s users to track and manage modem use relative to data plans • NAT - less routing and VPN NAT traversal • SNMP support • USB - to - serial console pass through support • IP passthrough support • Multicast Proxy support (requires hardware version 2.0) • IPv6 support LICENSABLE FEATURE S – REQUIRE EXTENDED ENTERPRISE LICENSE • OSPF, BGP, RIPv1 and RIPv2, VRRP, and STP ( also requires hardware version 2.0) • Site - to - site dynamic VPN with NHRP ( also requires hardware version 2.0) • NEMO (Network Mobility) / DMNR (Dynamic Mobile Network Routing for Verizon) (requires hardware version 2.0) • Layer 2 Tunneling Protocol (L2TP) • OpenVPN (SSL VPN) • Seamless integration with Zscaler's secure web gateway. • WPA2 Enterprise Authentication for WiFi as WAN

11. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 9 MBR140 0LP - AT 4G /3G LTE/HSPA+ for AT&T Technology: LTE, HSPA+ Downlink Rates: LTE 100 Mbps, HSPA+ 21.1 Mbps (theoretical) Uplink Rates: LTE 50 Mbps, HSPA+ 5.76 Mbps (theoretical) Frequency Band s : • LTE Band 17 (700MHz) , Band 4 (AWS) • UMTS/HSPA+ (850/1900/2100 MHz) • EDGE/GPRS/GSM (850/900/1800/1900 MHz) Module Power: LTE 23 +/ − 1 dBm, UMTS 23 +/ − 1 dBm (typ ical conducted) Module: Sierra Wireless MC7700 Module Antennas: t wo SMA male (plug), 1 dBi ( LTE), 2 dBi gain; finger tighten only ; support for GPS on aux connection GPS: standalone GPS support Industry Standards & Certs: PTCRB, FCC, AT&T Modem Part Number: MC200LP

134. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 132 Channel: (Shows if User Selection is se lected.) The WiFi channel corresponds to a frequency the router uses to communicate with other devices. For 2.4 GHz, the range is 1 to 11, and 1, 6, and 11 do not overlap each other. If a WiMAX modem is attached, a higher number channel will increase the chance the router's WiFi and modem's WiMAX radios will conflict with each other, which may result in lower throughput. Select a channel from the dropdown list: • 1 (2412 MH z) • 2 (2417 MH z) • 3 (2422 MH z) • 4 (2427 MH z) • 5 (2432 MH z) • 6 (2437 MHz) • 7 (2442 MHz) • 8 (2447 MHz) • 9 (2452 MHz) • 10 (2457 MHz) • 11 (2462 MHz) For 5.0 GHz, the ranges are 36 to 64 and 149 to 165. These channels do not interfere with a WiMAX modem. If you choose to use 5.0 GHz, you should consider switching antennas. The default WiFi antennas are optimized for the 2.4 GHz range. • 36 (5180 MH z) • 40 (5200 MH z) • 44 (5220 MH z) • 48 (5240 MH z) • 149 (5745 MH z) • 153 (5765 MH z) • 157 (5785 MH z) • 161 (5805 MH z) • 165 (5825 MH z) Client Timeout : If the access point is not able to communicate with the client it will disc onnect it after this timeout (in seconds).

205. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 203 7.11.1 WiFi Bridge When in WiFi Bridge mode with a configured profile, a WiFi Bridge device will be added to the local network interfaces, providing a way to bridge two LANs over a WiFi connection. For example, two separate Cradlepoint routers linked through WiFi Bridge mode allows you to have one WiFi - connected network in two separated sections of a large office building. This eliminates the need for extensive Ethernet cords to link the two routers , while allowing the full functionality of having one network. A router that is using Bridge mode passes network information through from the partner access point, so typically DHCP and NAT should be disabled. The router will connect to the remote WiFi acc ess point and enable the bridging of two LAN networks together over WiFi. Under Network Settings → WiFi / Local Networks , choose the Local IP Network you want to attach this LAN interface to. Edit that Network, and under the "Interfaces" tab you will be ab le to see your WiFi Bridge profiles as "Available" interfaces. NOTE : The LAN IP address of this router and the attached WiFi access point cannot be the same address. To set up WiFi Bridge, follow these steps: 1) In Internet → WiFi as WAN / Bridge u nder WiFi C lient Mode , click on “WiFi Bridge” to enable this mode. 2) Your bridge network must be enabled under Saved Profiles . Either import the desired network from Site Survey or click Add to configure it. 3) Once WiFi Bridge is enabled and a bridge network is configured in Saved Profiles , go to Network Settings → WiFi / Local Networks and select a network from the Local IP Networks list. Click on Edit to open the Local Network Editor and find the Interfaces ta b. Your configured bridge network should be listed in the “Available” section. Add this interface to your chosen network. 4) You need to turn off the DHCP Server. If you click Submit after attaching the WiFi bridge interface, a window will pop up asking you i f you want to turn off the DHCP Server. You can also do this manually: click on the DHCP Server tab while still under Network Settings → WiFi / Local Networks in the Local Network Editor . Deselect “DCHP Server” to disable it. 5) Optional: Also under Network Settings → WiFi / Local Networks in the Local Network Editor , click on the IP Settings tab. Change the Routing Mode to “ Disabled.” Changing the routing mode may improve security. You may also need to change the IP address to prevent IP conflict. Click Subm it to save your configuration.

165. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 163 7.1.8 CDMA Settings These settings are usually specific to your wireless carrier’s private networks. You should not set these unless directed to by a carrier representative. If a field below is left blank, that particular setting will not be changed in the modem. You should only fill in fields that are required by your carrier. • Persist Settings: If t his is not checked, th ese settings will only be in place until the router is rebooted or the modem is unplugged. • Active Profile: Select a number from 0 - 5 from the dropdown list. The following fields can be left blank. If left blank they will remain unchanged in the modem. • NAI (Username@realm): Network Access Identifier. NAI is a standard system of identifying users who attempt to connect to a network. • AAA Shared Secret (Password): “ Authentication, Authorization, and Accounting” password. • Verify AAA Shared Secret. • HA Shared Secr et : “Home Agent” shared secret. • Primary HA. • Secondary HA. • AAA SPI: AAA Security Parameter Index. • HA SPI: HA Security Parameter Index.

182. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 180 7.6.1 General • Tunnel Name – Enter a name to uniquely identify this tunnel. • LNS address – Enter the IP Address of the LNS (tunnel server) peer. • MTU – Set the maximum transmission unit (MTU) of the L2TP tunnel. • MRU – Set the maximum receive unit (MRU) to request from the tunnel peer . • Tunnel Enabled – Click to enable/disable this tunnel. Default: Enabled. Authentication – More authenticati on options and overrides are available in the next section . • Username – Username fo r user - specific authorization. L eave blank to disable . • Password – Shared secret (or password) used to authenticate the associated Local and Remote names. Redial • Enabled – Reconnect if disconnected .

183. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 181 7.6.2 Authentication • Remote Name – Authorization name specified by and to the remote system as its identity, sometimes a username or hostname. Leave blank to match any. • Local Name – Authorization name specified by and to the remote syste m as the local system identity; sometimes a username or hostname. Leave blank to match any. • Secret – Shared secret (or password) used to aut henticate the associated Local and Remote names. Overrides – Override Authentication methods/parameters. With methods set to Allow the two ends of the tunnel can negotiate a common scheme. Some times this negotiation fails, or the implementation on one end is incompatible with the other. To solve those authentication issues, enable the overrides as needed. • Authentication – Username fo r user - specific authorization. L eave blank to disable . • CHAP – Choose from Allowed, Refused, or Required. • PAP – Choose from Allowed, Refused, or Required. • Name – Override names used to authenticate the router. Leave empty to use the default. 7.6.3 Routes Typically specific routes are unnecessary, but they can be added in this section if needed. You can add or remove r outes to be used to funnel packets through the tunnel. • Network Address – This is the network address that is the destination of the route. This should be set to the network address at the remote side of the tunnel . • Netmask – This is the corresponding subn et mask of the network being defined.

163. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 161 Automatically check for new firmware : (Default: selected) The modem will automatically check for firmware updates by default. Modem Connection Mode: Specify how the modem should connect to the network. Not all options are available for all modems; this will default to Auto if an incompatible mode is selected. • Auto (all modes): Let the modem decide which network to use. • Auto 3G (3G or less): Let the modem decide which 2G or 3G network to use. Do not attempt to connect to LTE. • Force LTE: Connect to LTE only and do not attempt to connect to 3G or WiMAX. • Force 3G (EVDO, UMTS, HSPA): Connect to 3G network only. • Force 2G (1xRTT, EDGE, GPRS): Connect to 2G network only. See the following tables for a breakdown of the technologies used with various Cradlepoint ARC models when any Modem Connection Mode is selected. CDMA Technology Auto Auto 3G Force 4G Force 3G (module auto selects) Force 2G (<= 3G) LTE 1xEVDOAe (EHRPD) 1xEVDO - A (HRPD) (3G) 1xEVDO - 0 (HRPD) (3G) 1xRTT (2.5G) ARC MBR1400LE (Sierra Wireless MC7750) ✔ ✔ ✔ ✔ ✔ ✔ ✔

211. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 209 • Any • ICMP • TCP • UDP • GRE • ESP • SCTP Source IP Address , Source Netmask , Destination IP Address , and Destination Netmask: Specify an IP address or range of IP addresses by combining an IP address with a netmask for either “source” or “destination” (or both). Source vs. destination is defined by traffic flow. Leave these blank to include all IP addresses (such as if your rule is defined by a particular por t instead). E XAMPLE: If you want to associate this rule with your guest LAN, you could input the IP address and netmask for the guest LAN here (leaving the last slot “0” to allow for any user attached to the guest network): • Source IP Address: 192.168.10.0 • Source Netmask: 255.255.255.0 Failover: (Default: Selected.) When this is selected and traffic from the chosen WAN device for this rule is interrupted, the router will fail over to another available WAN device. Deselect this option to restrict this traffi c to only the selected WAN interface. WAN Binding Type: You have several options for specifying the type of WAN interface(s) you want associated with your rule. Designate the interface(s) by Port , Manufacturer , Model , Type , Serial Number , MAC Address , or U nique ID . This

129. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 127 S ecurity Mode: You have several options for selecting a security mode. The mode you choose depends on the security features your wireless adapters support. • WPA2 Personal • WPA / WPA2 Personal • WPA Personal • WPA2 Enterprise • WPA / WPA2 Enterprise • WPA Enterprise • WEP Auto • Open Select “Open” to create a hotspot: otherwise select the best security that your devices will support ( Cradlepoint recommends WPA2 ). Depending on which Security Mode you select, there are different setup options. • “ Personal ” security modes require passwords. • “ Enterprise ” security modes are linked to a RADIUS server and require RADIUS authentication: IP , Port , and Shared Key (Secondary IP and NAS ID optional). • “ WPA2 ” (Personal or Enterprise) forces AES as the WPA Cipher. • “ WPA/WPA2 ” and “ WPA ” (Personal or Enterprise) allow AES, TKIP/AES, and TKIP. • “ WEP Auto ” requires a WEP Key. • “ Open ” has no password or other security measures. NOTE : If you don’t know whether you should choose Personal or Enterprise, assume Personal since you need to know RADIU S authentication for Enterprise. In order to protect your network from hackers and unauthorized users, Cradlepoint highly recommends WPA2/AES for security if your attached devices can support it. WEP and WPA/TKIP are obsolete and have been replaced by WPA/ AES. Using those security settings will cause the WiFi to limit to 802.11g modes. NOTE: If you select one of the security modes and are unable to connect to the router afterwards, you can use the reset butto ns to reset the router to its factory default sta te and try a different security mode instead.

47. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 45 5.1 Client List The Client List displays the specifications of each de vice connected to your router, including Wireless and Wired clients. Wireless Clients . For each device using a wireless connection to your MBR1400, the following information is displayed: Hostname , IP , MAC , Connection , and Time Online . Wired Clients . For each device using a wired connection to your MBR1400, the following information is disp layed: Hostname , IP , and MAC . Hostname: The name by which each computer o r device in a network is known. IP: The “IP address,” or “ Internet Protocol address,” specifies a location for each device. MAC : This is the " MAC address", a factory - assigned identif ier used to identify a specific attached computer or device. Connection : Summary of the wireless connection. For example: 802.11n, 20 MH z, 130 Mbps, - 26 dBm • 802.11n : The transmission stan dard being used by the client. Possible v alues include 802.11a, 802.11b, 802.11g, and 802.11n. 802.11n is the newest and best standard, but some older devices may not support it. • 20 M H z : This is the channel width that defines the theoretical data rate (in megahertz ) that the attached computer or device can send to or r eceive from the router. The channel width is set in Network Settings → WiFi / Local Network s . Typically this will be 20 MHz, but 40 MHz is possible if the router is set to use two adjacent 20 MHz channels. A wider channel can mean better performance, but n ot if there is too much interference. Even if 40 MHz is set in the WiFi Channel Width, the router may still fall back to 20 MHz if interference is found. • 130 Mbps : The transmit rate (in megabits per second ) currently used to transmit packets from the router to the client. This rate changes automatically to match environmental conditions. Distance from the router, interference, etc can impact this value. Higher values indicate better performance. Devices can still function in the network with as little as 1 Mbps.

43. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 41 Network Settings – Provides configu ration options for the networks, or LAN, created by your router . For example, enable a guest WiFi network ( WiFi / Local Networks ), set up rules to filter websites ( Content Filtering ), or create a traffic - shaping rule to set bandwidth priorities ( WiPipe QoS ). Internet – Provides configuration options for the Internet sources, or WAN, used b y the router. For example, you can set up a rule to track how much data you are using per month on a modem ( Data Usage ), set WiFi to be an Internet source ( WiFi as WAN / Bridge ), or set the failover order for your Internet sources ( Connection Manager ). System Settings – Provides broad administrative controls. For example, you can set up a Terms of Use page for your guest network ( Hotspot Services ), enable remote management of the router ( Administration ), or upgrade firmware ( System Software ). 4.4.1 Network Settings vs. Internet When using the Web interface, it will be important to pay attention to t he difference between the Internet source for your MBR1400 and the network created by the MBR1400. The “ Internet ” tab broadly re fers to the router’s sourc e of Internet , while the “Network Settings” tab broadly refers to the network created by the router. Internet tab Network Settings tab Internet “input” Source for MBR1400 WAN (Wide Area Network) Internet “output” Network created by MBR1400 LAN (Local Area Network) Examples: • If you want to change the content filtering settings for the network created by the MBR1400, go to the Network Settings tab. • If you have multiple Internet sources (such as a Cradlepoint business - grade m odem and an Ethernet connection) for which you would like to set priority levels, go to the Internet tab.

52. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 50 Local Network s : “ Detailed Info ” links to Network Settings → WiFi / Local Network s . • Clients: The n umber of current clients For each network, the following information is displayed: • Network Name: IP Address/N etmask o Route Mode: NAT (Network Address Translation), Standard ( NAT - less), Hotspot, or Disabled o Access: Admin Access, LAN Isolation, UPnP (Universal Plug and Play) , and/or DHCP To configure a network , see Network Settings → WiFi / Local Network s . WiFi Network s : “ Detailed In fo ” links to Network Settings → WiFi / Local Network s . • WiFi Radio: Channel: 1 - 11 for 2.4 GHz; 36, 40, 44, 48, 149, 153, 157, 161, or 165 for 5 GHz; Transmit Power (expressed as a percentage) For each WiFi network, the following information is displayed: • SSID : Service Set Identifier, an id entifier for a wireless network o Security: WPA2/WPA1/WEP Personal/Enterprise or Open; Isolated Clients o Network: The name of the local network

60. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 58 General Information • Product PANTECH UML290 • Protocol IP DHCP • Unique Identifier • ESN/IMEI • Model UML290VW • Type modem • Port • Manufacturer Pantech, Incorporated IP Information • Netmask • IP Address • Gateway Statistics • Outgoing Bits/Second • Incoming Bits/Second • Incoming Bytes • Outgoing Bytes

33. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 31 You may have changed the administrator password d uring initial setup using the First Time Setu p Wizar d . Log in using your personalized administrator password. If you have forgotten your personalized password, you can reset the MBR1400 to factory defaults. When you reset the router, t he administrator password will revert back to the Default Password . Press and hold the reset button on the router unit until the lights flash (a pproximately 10 - 15 seconds). You can then log in using the Default Password . 4.1.1 Router Details The Administrator Lo gin page includes a quick - reference section that shows the following information: Router Details • Model Number: MBR1400 • Internet Connection : Connected/Disconnected Wireless Details • Status: Enabled/Disabled • Clients: T he number of attached users • Channel: T he channel number • Name : T he name of the primary network (i f you have more than one wireless network enabled, the additional network names will also be listed here) Modem Details (i f you have a business - g rade/ USB/ExpressCard data modem attached) • Manufacturer : The name of the modem manufactur er ( Cradlepoint , Novatel, etc.) • Model : The name of the modem model • Signal : T he strength of the signal (dBm) • Mode: LTE, EVDO, HSPA, etc.

151. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 149 7.1.5 IPv6 Settings The IPv6 ( http://en.wikipedia.org/wiki/IPv6 ) configuration allows you to ena ble and configure IPv6 for a WAN device. These settings should be configured in combination with the IPv6 LAN settings (go to Network Settings → WiFi / Local Networks , select the LAN under Local IP Networks , and click Edit ) t o achieve the desired result. This is a dual - stacked implementation of IPv6, so IPv6 and IPv4 are used alongside each other. If you enable IPv6, the router will not allow connections via IPv4. When IPv6 is enabled, some router features are no longer supported. These are: • RADIUS/TACACS+ accounting for wireless clients and admin/CLI login • IP Passthrough (not needed with IPv6) • NAT (not needed with IPv6) • Bounce pages • UPnP • Network Mobility • DHCP Relay • VRRP, GRE, GRE over IPSec, OSPF, NHRP • Syslog • SNMP over the WAN (LAN works) There are two main types of IPv6 WAN connectivity: native ( Auto and Static ) and tunneling over IPv4 ( 6to4 , 6in4 , and 6rd ). • Native – ( Auto and Static ) The upstream ISP routes IPv6 packets directly. • IPv6 tunneling – ( 6to4 , 6in4 , and 6rd ) E ach IPv6 packet is encapsulated by the router in an IPv4 packet and routed over an IPv4 route to a tunnel e ndpoint that decapsulates it and routes the IPv6 packet natively. The reply is encapsulated by the tunnel endpoint in an IPv4 packet and routed back over an IPv4 route. Some tunnel modes do not require upstream ISPs to route or even be aware of IPv6 traffi c at all. Some modes are utilized by upstream ISPs to simplify the configuration and rollout of IPv6.

95. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 93 • Port Negation: Match on any port that is NOT in the specified port range. • Port (s): Use for a single port or a range of ports. Fill in the left side for a single port. Us e Network IP , Netmask , and Port (s) to specify the ports and addresses for which the rule applies. You can specify a range of ports or a single port. Similarly, the netmask can be used to define either a range of addresses (i.e. 255.255.255.0) or a single a ddress (255.255.255.255). If you leave these values blank, then all IP addresses and ports will be included. IP Source and IP Destination options can be used to differentiate between the directions that packets go. You could permit packets to come from par ticular IP addresses but then not allow packets to return to those addresses. Example of an IP Filter Rule: Suppose you have opened a port in your firewall in order to run a server. Someone, Johnny, is abusing that opening, so you would like to restrict his access. Create a rule that will deny Johnny’s IP address. Add IP Filter Rule • Name: No more Johnny • Enabled: Selected • Action: Deny • Protocol: Any IP Source • Network IP : 172.22.24.160 (Johnny’s IP address) • Netm ask: 255.255.255.255 (This net mask restricts the rule to one single address). • Port (s) : 80

170. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 168 WAN Configuration Rule This section allows you to create simple or complex rules that affect how individual Internet sources or classes of sources (perhaps all WiMAX modems or all modems from Sierra Wireless) behave in the router. After clicking “Add” or “Edit,” you will see a p opup with the following tabs: • Filter Criteria • General Settings • Ethernet Settings • Modem Settings • WiMAX Settings • CDMA Settings • SIM/APN Settings Filter Criteria . Begin by setting the Filter Criteria if you are creating a new rule. Create a name for your rule and the condition for which the rule applies: Rule Name: Create a name meaningful to you. This name is optional. Select each of the following to create a condition for your rule. When: • Port ( USB Port 1, 2, 3; ExpressPort 1, 2): Select by the port that you are plugging the modem into. • Manufacturer: Select by the manufacturer , such as Sierra Wireless. • Model : Set your rule according to the specific model of modem. • Type ( Ethernet, LTE, Modem, WiMAX, Wireless as WAN, HSPA): Select by type of Internet source. • Serial Number : Select 3G or LTE modem by Serial Number. • MAC Address : Select WiMAX modem by MAC Address. • Unique ID : Select by ID . This is generated by the router and displayed when the device is connected to the router.

59. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 57 5.7.2 LTE Modem (PANTECH UML290) Diagnostics • Home Address • MN - HA SPI • Modem Firmware Version • Battery Status • MN - HA SS • Network Address Identifier (NAI) • Signal Strength(dBm) • Rev Tun • Battery Level • Secondary Home Agent • Service Display LTE • Primary Home Agent • Carrier Status • Profile • MN - AAA SPI • PIN Status • MN - AAA SS • Connection State (connected, idle, etc.)

242. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 240 8.5.2 RADIUS/UAM Settings This section allow s you to configure a R ADIUS and Universal Access Method server. After the user accepts the terms, you can either let him/her continue to the URL they were trying to reach or you can force the user to go to a specified UAM Server or URL once before continuing on. RADIUS setting s : • Server Address 1: Assigned by RADIUS service. • Server Address 2: This is an optional backup server. • Authentication Port : T he standard port number, 1812, will usually be sufficient. • Accounting Port : The standard port number, 1813, will usually be s ufficient. • Shared Secret : Assigned by RADIUS service. • Redirection On Successful Authentication : Choose from the dropdown list of options for redirection: o Redirect to the UAM Server . o Redirect to the URL that the user intends to visit. o Redirect to the following URL ( input the desired URL) . • Session Timeout: (Default: 60 minutes.) The amount of time the user may use the router before being forced to authenticate again. This value can be overwritten by the RADIUS server. • Idle Timeout: (Default: 15 minutes. ) If the user is idle for this amount of time, make them re - authenticate. • Bandwidth (upload): (Default: 512 Kbits/sec.) The data rate limit for users uploading data through the hotspot. • Bandwidth (download): (Default: 1024 Kbits/sec.) The data rate limit f or users downloading data through the hotspot. •

2. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 ` Preface Cradlepoint reserves the right to revise this publication and to make changes in the content thereof without obligation to notify any person or organization of any revisions or changes. Manual Revisions Revision Date Description Author 1.0 J uly 28 , 2011 Initial release for Firmware version 3.2. 4 Jeremy Cramer 1.1 Aug. 22, 2011 Updates for Firmware version 3.3.0 Jeremy Cramer 1.2 Jan. 20 , 2012 Updates for Firmware version 3.4 . 1 and ARC versions Jeremy Cramer 1.3 May 1 , 2012 Updates for Firmware version 3.5.0 Jeremy Cramer 1.4 May 15 , 2012 Updates for Firmware version 3.6.0 Jeremy Cramer 2.0 Dec. 28 , 2012 Updates for Firmware version 4. 1.1 and ARC MBR1400LP - AT Jeremy Cramer 2.1 Feb. 25, 2013 Updates for Firmware version 4.2 and hardware version 2.0 Jeremy Cramer 2.2 Aug. 26 , 2013 Updates for Firmware version 4. 4 Jeremy Cramer 3.0 Nov. 19, 2013 Updates for Firmware version 5.0 Jeremy Cramer Trademarks Cradlepoint and the Cradlepoint logo are registered trademark s of Cradlepoint , Inc. in the Unit ed States and other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies. Copyright © 2013 by Cradlepoint , Inc. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written consent by Cradlepoint , Inc.

61. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 59 5.7.3 HSPA+ Modem (Nokia Datacard) Diagnostics • Manufacturer Nokia • Product Nokia Datacard • Model Nokia Internet Stick CS - 18 • ESN/IMEI • Modem Firmware Version • Mobile Directory Number • Carrier ID AT&T • Carrier Status • Signal Strength • Signal Error Rate • PIN Status General Information • Model Nokia Internet Stick CS - 18 • Unique Identifier • Port • Profiles 1 - 9 • Type modem

113. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 111 6.8.1 L ocal IP Networks Local IP Networks displays the following information for each network: • Network Name and IP address/Netmask ( a long the top bar ) • Enabled : Yes/No • Multicast Proxy (Enabled/Disabled) • DHCP Server (Enabled/Disabled) • Schedule (Enabled/Disabled – See the Schedule tab in the Local Network Editor) • VRRP Failover State (Disabled, Backup, or Master) • IPv4 Routing Mode (NAT, Standard, IP Passthrough, Hotspot, Disabled) • IPv6 Addressing Mode (SLAAC Only, SLAAC with DHCP, Disable SLAAC and DHCP) • Access Control (Admin Access, UPnP G ateway, LAN Isolation) • Attached Interfaces (Ethernet ports, WiFi, VLAN) Click Add to configure a new network , or select a n existing network and click Edit to view configuration options . HotSpot (Captive Portal) When you set a network as a “Hotspot” under Routing Mode , you will also need to : 1) Configure hotspot settings under System Settings → Hotspot Services . Click on Configure to link to that page. 2) If you want a hotspot that includes WiFi , set one of your WiFi interfaces to “Open” for its Security Mode and attach this int erface to your hotspot network. Otherwise guests will need to know the password to connect to the WiFi network even before v iewing a Terms of Service page (or other hotspot options). Also , make sure your WiFi interface is “Enabled”.

194. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 192 uploaded to the rout er. Enable Certificate Support in the Global VPN Settings to upload a single set of certificates for the router to use. Pre - shared Key : Create a password or key. The routers on both sides of the tunnel must use this same key . Mode : Tunnel or Transport . Tun nel Mode is used for protecting traffic between different networks, when traffic must pass through an intermediate, untrusted network. Transport Mode is used for end - to - end communications (for example, for communications between a client and a server). Ini tiation Mode : “ Always On ” or “ On Demand . ” “ Always On ” is used if you want the tunnel to initiate the tunnel connection whenever the WAN becomes available. Select On Demand if you want the tunnel to initiate a connection if and only if there is data traffic bound for the remote side of the tunnel. Tunnel Enabled : Enabled or Disabled. MBR1200 Quick Connect : VPN tunnels in the MBR1400 have more choices than they do in the MBR1200, so it is more complex to configure. Check this box to simplify setup by streamlining your options. WAN Binding : WAN Binding is an advanced optional parameter used to configure a VPN tunnel to ONLY operate when the specified WAN device(s) are available and connected. An example use case is a router with both a primary and backu p WAN connection and the VPN tunnel should only be used when the system has failed over to the backup connection. This use case makes the most sense when the primary and backup connec tions are mutually exclusive, i.e . , not connected at the same time. Selec t each of the following to create a condition for your WAN Binding setup. When: • Port ( USB Port 1, 2, 3; ExpressPort 1, 2): Select by the port that you are plugging the modem into. • Manufacturer: Select by the manufacturer , such as Sierra Wireless. • Model : Set your rule according to the specific model of modem. • Type ( Ethernet, LTE, Modem, WiMAX, Wireless as WAN, HSPA): Select by type of Internet source. • Serial Number : Select 3G or LTE modem by Serial Number. • MAC Address : Select WiMAX modem by MAC Address. • Unique ID : Select by ID . This is generated by the router and displayed when the device is connected to the router. Condition: Select “is,” “is not,” “starts with,” “contains,” or “ends with” to create your condition’s statement. Value : If the correct value s are available, select from the dropdown list. You may need to manually input the value .

189. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 187 7.9.1 General • Tunnel Enabled – Click to enable/disable this tunnel. • Tunnel Name – Enter a name to uniquely identify this tunnel. • Tunnel Mode – Select which mode this tunnel endpoint is required to be. Choose from the following: o Client o Server • Local Tunnel Address – Enter the IP Address of the LNS (tunnel server) peer. • Remote Tunnel Address – Enter the IP Address of the LNS (tunnel server) peer. • Support IPv6 Tunnels – Allow IPv6 traffic to be forwarded over this tunnel. If you select this option, also input an IPv6 Tunnel Address and Tunnel Prefix Length for IPv6 • Tunnel Protocol – Choose UDP or TCP. • Configuration Mode – Simple confi guration requires the least amount of configuration for the tunnel, while advanced allows for a more detailed setup. • Ping – (Displays if the Configuration Mode is Advanced ) If no packets have been se n t in the amount of time entered, a ping is sent to the r emote endpoint. • Ping Restart – (Displays if the Configuration Mode is Advanced ) If no pings have been received in the amount of time entered, OpenVPN restarts the tunnel.

212. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 210 selection will create a dropdown list of options to complete a sentence with the following form: “When ____ is ____ ,” such as, “When Type is LTE .” You also have the option to replace “is” with “isn’t,” “starts with,” “ends with,” or “contains.” • Port: Select from the dropdown list of possible WAN ports on the router. o WAN Ethernet o LAN Ethernet o Undefined • Manufacturer: Select from a dropdown list of attached devices. • Model: Select from a dropdown list of attached devices. • Type: Select from the dropdown list of possible WAN types. o WiMAX o Modem o LTE o Ethernet o Wireless As WAN • Serial Number : Select from a dropdown list of attached devices. • MAC Address : Select from a dropdown list of attached devices. • Unique ID : Select from a dropdown list of a ttached devices. Load Balance Algorithm: Select the Load Balance Algorithm for this WAN Affinity rule from the following dropdown options: • Round - Robin: Evenly distribute each session to the available WAN connections. • Rate: Distribute load based on the curr ent upload and download rates. A WAN device's upload and download bandwidth values can be set in Internet → Connection Manager . • Spillover: This was the default algorithm in older (version 3) firmware. Load is always given to devices with the most available bandwidth. The estimated bandwidth rate is based on a combination of the upload and download configuration values and the observed capabi lities of the device. • Data Usage: This mode works in concert with the Data Usage feature ( Internet → Data Usage ). The router will make a best effort to keep data usage between interfaces at a similar percentage of the assigned data cap in the Data Usage ru le for each interface, rather than distributing sessions based solely on bandwidth. For proper function

65. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 63 5.7.5 GSM Modem ( Nokia Datacard ) Diagnostics • Signal Error Rate • Modem Firmware Version • Battery Status • Battery Level • Carrier Status • Signal Strength(dBm) • PIN Status • Connection State (connected, idle, etc.) General Information • Product Nokia Datacard • Protocol PPP • Unique Identifier • ESN/IMEI • Model Nokia Internet Stick CS - 18 • Type modem • Port • Manufacturer Nokia IP Information • Netmask • IP Address • Gateway Statistics • Outgoing Bits/Second • Incoming Bits/Second

51. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 49 Router Information : “ Detailed Info ” links to System Settings → Administration . • Product: MBR1400 or MBR1400v2 • Firmware : Gives the number of the current firmware version • Build Date : Year - month - day - hours - minutes - seconds for t he most recent firmware upgrade • MAC Address: The router’s unique identifier • CPU Usage : Expressed as a pe rcentage • Up Time: Total time for current session • Clock : Current local date and time To check for f irmware upgrades, see System Settings → System Software . Internet : “ Detailed Info ” links to Internet → Connection Manager . • State: Connected/Disconnected • Signal Strength: Expressed as a percentage (Signal Strength is not included if Ethernet is the WAN type ) • WAN Type: Ethernet, Modem, or WiFi as WAN • Connection Type: Possibilities include: DHCP (for Ethernet), HSPA, LTE, WiMAX, etc. • Connected Time: The time the current Int ernet source (WAN) has been connected • IP Address • Gateway • DNS Servers For configuration options, see Internet → Connection Manager . The IP address and gateway describe your active WAN source. For DNS server configuration options, see Network Settings → DNS .

67. CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0 © 2013 CRADLEPOINT , INC. PLEASE VI SIT HTTP://KNOWLEDGEBASE . CRADLEPOINT .COM/ FOR MORE HELP AND RE SOURCES PAGE 65 5.7.6 EVDO Modem: ( MC760 Comcast ) Diagnostics • Modem Firmware Version • PRL Version • Service Display EVDO • Carrier Status • Signal Strength(dBm) • Connection Type CDMA • Connection State (connected, idle, etc.) General Information • Product MC769 COMCAST • Protocol PPP • Unique Identifier • ESN/IMEI • Model MC760 COMCAST • Type modem • Port • Manufacturer Novatel Wireless Inc. IP Information • Netmask • IP Address • Gateway Statistics • Outgoing Bits/Second • Incoming Bits/Second • Incoming Bytes • Outgoing Bytes

Views

  • 3014 Total Views
  • 2445 Website Views
  • 569 Embeded Views

Actions

  • 0 Social Shares
  • 0 Likes
  • 0 Dislikes
  • 0 Comments

Share count

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Embeds 3

  • 16 www.google.com
  • 1 www.google.co.jp
  • 1 www.google.pl