232OPDRI-PH Datasheet

Datasheet for 232OPDRI-PH RS-232 Opto isolator.

Share on Social Networks

Share Link

Use permanent link to share in social media

Share with a friend

Please login to send this document by email!

Embed in your website

Select page to start with

1. www . bb - elec . com | The 232OPDRI-PH is our premium Heavy Industrial RS-232 Isolated Repeater. Designed for rugged industrial environments, it has been put through some of the most exacting compliance tests in the industry. Meeting the requirements of IEC 61850-3 and IEEE 1613, it is suitable for installation in electrical substations. These specifications are more stringent than the NEMA TS1/TS2 requirements for transportation applications. Powerful isolation on both data ports protects your equipment and data from damaging ground loops and surges. Additional isolation on the power supply circuits adds a third degree of protection. Packaged in a rugged IP30 metal case, this repeater operates in wide temperature extremes. The panel mount form factor with DIN Rail mount option makes it easy to integrate into your control panel or other industrial equipment. Installation and configuration is easy. Data is connected with a DB9 female connector (DCE) and a DB9 male connector (DTE). Power is connected through terminal block that accepts 10 to 48 VDC from any external source. • IEEE-61850-3, IEEE-1613 • NEMA TS2 • -40 to 85°C Operating Temperature • Rugged IP30 Metal Panel Mount Case • 50G Shock, 4G Vibration • 2kV Triple Isolation • 10 to 48 VDC Input Power PRODUCT FEATURES ACCESSORIES MDR-40-24 - DIN Rail Mount Power Supply 24VDC, 1.7 A output power DRAD35 - DIN Rail Mounting Kit 35mm TBKT1 - Replacement Term Block, 2 ORDERING INFORMATION MODEL NUMBER DESCRIPTION 232OPDRI-PH Heavy Industrial RS-232 Isolated Repeater Heavy Industrial RS-232 Isolated Repeater 232OPDRI-PH 232OPDRI-PH_1414ds

2. International Office: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 European Office: Westlink Commercial Park Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445 orders@bb-elec.com support@bb-elec.com Heavy Industrial RS-232 Isolated Repeater 232OPDRI-PH DRAWING/ARTWORK? SPECIFICATIONS SERIAL TECHNOLOGY Serial Connector DB9 F (DCE), DB9 M (DTE) Data Rate Up to 115.2 Kbps Isolation 2 KV RMS, 1 minute POWER Source External (Not Included) Power Connector 2 Position Removable Terminal Block Input Voltage 10 to 48 VDC (56 VDC Maximum) Power Consumption 0.55 W (typical), 1.5 W (maximum) TERMINAL BLOCKS Wire Size Accepted 28 to 12 AWG Pitch 5.08 mm Insulation Resistance ≥500 MΩ @ 500 VDC Maximum Torque 5 Kg / cm INDICATORS Power Red LED Data Green LED TD, RD, CTS, RTS MECHANICAL Dimensions 13.24 x 9.29 x 3.30 cm 5.2 x 3.7 x 1.3 in Enclosure IP30 Metal, Panel Mount Weight 0.46 lbs (208.65 grams) MTBF 194712 Hours MTBF Calc. Method Parts Count Reliability Prediction ENVIRONMENTAL Operating Temperature -40 to 85°C (-40 to 176°F) Storage Temperature -40 to 85°C (-40 to 176°F) Operating Humidity 0 to 95% Non-condensing REGULATORY Approvals FCC, CE, IEC 61850-3, IEEE 1613 UL C1 D2, File: E245458, NEMA TS2 IEC 61850-3 ELECTRO MAGNETIC INTERFERENCE SPECIFICATIONS Test Description Test Level Level 61000-4-2 ESD Enclosure Contact Enclosure Air 8 kV 15 kV 4 4 61000-4-3 Radiated RFI Enclosure Ports 10 V/m 3 61000-4-4 Burst (Fast Transient) Signal Ports DC Power Ports 4 kV @ 2.5 Khz 4 kV - 4 61000-4-5 Surge Signal Ports DC Power Ports 2 kV line to earth, 1 kV line to line 2 kV line to earth, 1 kV line to line 4 3 61000-4-6 Induced (Conductive) RFI Signal Ports DC Power Ports 10 V RMS 10 V RMS 3 3 61000-4-12 Damped Oscillatory Signal Ports DC Power Ports 2.5 kV common, 1 kV diff mode @ 1MHz 2.5 kV common, 1 kV diff mode @ 1MHz 3 3 61000-4-16 Mains Frequency Voltage Signal Ports DC Power Ports 30 V Continuous, 300 V for 1 s 30 V Continuous, 300 V for 1 s 4 4 61000-4-17 Ripple on DC Power Supply DC Power Ports 10% 3 IEEE 1613 C37.90 ELECTROMAGNETIC INTERFERENCE SPECIFICATIONS C37.90.3 ESD Enclosure Contact Enclosure Air 8 kV 15 kV - C37.90.2 Radiated RFI Enclosure Ports 10 v/m - C37.90.1 Fast Transient Signal Ports DC Power Ports 4 kV @ 2.5 kHz 4 kV - ENVIRONMENTAL SPECIFICATIONS 60068-2-1 Cold Temperature Test Ad (-)40 C, 16 Hours - 60068-2-2 Dry Heat Test Bd (+)85 C, 16 Hours - 60068-2-30 Humidity (damp heat cycle) Test Dd 90% (non-condensing) (+)55C, 6 Cycles - IEC 600068-2-6 Vibration Test Fc 4g Class 2 IEC 600068-2-27 Shock Test Ea 50g Class 2 IEC 60068-2-32 Drop - 6 faces, 1 corner, 3 edges, total 10 drops at 1 m -

Views

  • 732 Total Views
  • 584 Website Views
  • 148 Embeded Views

Actions

  • 0 Social Shares
  • 0 Likes
  • 0 Dislikes
  • 0 Comments

Share count

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Embeds 1

  • 2 www.dcitech.com