Remote I/O and Temperature Monitor

Remote I/O and Temperature Monitor

CAD$ 199.00

Add to Cart

Remotely Measure 4 Voltages, 4 Currents, 2 Temperatures, Remotely Control Equipment With 4 Relays, Automatically Control 2 Relays Based on Temperature, Access via Web or SNMP. On-Board Datalogger and History Graphs, DIN Rail Mounting

The PowerSens™ Web Based Remote Monitor and Control System is a versatile tool which enables the equipment designer and installer to remotely monitor his equipment and site. The unit can be accessed via the network (web and SNMP) to remotely monitor up to 4 voltages, 4 currents, 2 temperatures and control power to various equipment using 4 on-board relays.  The system has built-in surge protection to prevent damage from electrical surges.

On board data-logging and graphing capabilities allow the user to see history of the various parameters being measured. The graphical interface allows the user to control relays via a single mouse click and monitor all the measurement parameters real-time via any web browser. The web interface allows access and control via desktops, laptops, tablets and smartphones.

The system allows control of 2 of the relays directly via the temperature sensors. The user can set temperature limits and automatically turn on the relays when the measured temperature exceeds the set temperature. This feature can be used to control fans, heaters or other equipment which needs to be powered on/off based on a particular interior or exterior temperature.

The relays have a special one-click cycle feature with programmable cycle times which can be used to turn a device off and then back on after the predetermined time with a single button click. This is useful for rebooting a device like a POE Switch by power cycling it, thereby rebooting all devices attached to the switch. The relays are normally closed type so they don’t use any power in their normal operating mode.

Two of the current ports provide bi-directional current (+/-), showing direction of current flow. This is useful for monitoring batteries so you can see when the battery is charging and when it is discharging.

Connections are via removable wire terminal connectors. This allows for easy troubleshooting and maintenance because the unit can be removed from the system without disturbing the system wiring.

User defined labels for each parameter makes sure that when viewing the web interface or graphs that users can quickly identify the parameter they are concerned about. A real time clock based on PC time or Internet time ensures that data logging is accurate.

Each parameter has programmable +/- offsets to be able to perform field calibration to compensate for things such as line loss or variations in measuring equipment. This provides unsurpassed flexibility as each device can be tailored by the customer to there specific needs.

A free discovery tool is available via download to assist in finding the DIN-IO-Monitor units on the network. It works across different subnets. This is helpful if a user forgets the IP address of the unit or has the unit configured for DHCP client and he is unsure what IP address the unit is operating on.
                    -40C to +75C Operation

                    Voltage Measurement (DC) V1, V2, V3, V4 = 1-80VDC

                    Voltage Measurement Accuracy +/- 0.1V

                    Current Measurement (DC) I1, I2 = 0.1A to 20A I3, I4 = +/-10A

                    Current Measurement Accuracy +/- 0.1A

                    Temperature Measurement T1,T2 = -40C to 125C

                    Temp Measurement Type T1 = Embedded, T2 = External Sensor (included)

                    Temp Measurement Accuracy +/- 1 degC

                    Relays (Normally Closed Type) R1, R2, R3, R4 = 10A DC

                    Relay Control R1, R2 = Manual or Ping or Time Control

                    R3, R4 = Manual or Temperature Control

                    Power Requirements 10-58VDC Wire Terminal or 802.3af Class 0 POE, 3W Typ

                    Accessibility Via Web Browser and SNMP

                    Data-Logger FIFO, Max 1300 data sets, Program log interval

                    Connections Removable Wire Terminal

                    Wire Size 12AWG Max

                    Mounting DIN Rail

                    Operating Temperature -40C to +75C (-40F to 167F)

                    Humidity (RH) 0% - 90%

                    Dimensions (LxWxH) 125 x 102 x 46mm (4.9” x 4” x 1.8”)

                    Weight 410g (14.5 oz)