Related Products
Three Channel Serial Server with Ethernet
BASIC-programmable controller, universal RS232/422/485 port, 3 serial channels, WiFi, OLED display, PoE, power adaptor.
The DS1102 features a multi-channel RS232/422/485 port. The device has a single DB9M connector and is priced as a single-port product, yet provides 3 independent RS232 channels, 2 independent RS422 channels, or a single RS485 channel.
The DS1102 comes preloaded with a fully functional serial-over-IP application that turns the DS1102 into a powerful multi-channel, multi-protocol serial-over-IP converter, a.k.a. a device server.
The device can be powered with 12 VDC via its power jack or by power-over-Ethernet (PoE). In addition, the DS1102 is equipped with a 96x32 monochrome OLED display. This display shows the current configuration and communication state for each channel and other useful information.
There are eight LEDs on the device's front: green and red main status LEDs, yellow Ethernet link LED, and five blue LEDs. A buzzer is provided as well. Each DS1102 is supplied with the DIN rail and wall mounting plates.
Specifications:
10/100Base-T, auto-MDIX Ethernet port.
Software-selectable RS232, RS422, and RS485 modes:
Baudrates of up to 921,600bps;
None/even/odd/mark/space parity modes;
7 or 8 bits/character;
RTS/CTS and XON/XOFF flow control;
Up to 3 serial channels in the RS232 mode, flexible mapping:
A single channel: RX, TX, CTS, RTS, DSR, and DTR lines;
3 channels: RX, TX, RX2, TX2, RX3, and TX3 lines;
6 additional arrangements.
Up to 2 serial channels in the RS422 mode, flexible mapping;
A single channel in the RS485 mode.
96x32 monochrome OLED display.
Power-over-Ethernet (PoE).
Built-in buzzer.
Eight LEDs:
Green and red main status LEDs;
Yellow Ethernet link LED;
Power: 12VDC nominal (9 ~ 18V).
Dimensions (LxWxH): 90x48x25mm.
Operating temperature range: -5 ~ +70C.
Firmware is upgradeable through the serial port or network.
CE- and FCC-certified.
DIN rail mounting plate
Wall mounting plate and two screws