|
|
|
|
Low Cost, Ultra
Compact
|
On-board Power Supply which accepts a 12V AC
inputs
| 16 NPN type Inputs with LED indicators
| 12 Relays Output each is capable of conducting
10A @250V AC continuously
| Programmable in Ladder Logic software with SIMULATOR
- TRiLOGI | - Creates ladder program using meaningful names - Uses simulator to fully test programs on the PC screen before downloading - On-line monitoring of all I/O logic states on ladder diagram or on full screen Networkable by RS485 (two-wire) bus | - Built-in RS485 adapter. Each controller can assume an 8-bit ID. Host computer can access any controller linked to it by just two wires! EEPROM program storage (100 years)
| Detachable screw terminal blocks
| Compact size. Only 16.5cm (L) x 10.5cm (W) x
3.0cm (H)
| | |
To help new users get started quickly, we package Starter Kits for different models of PLC which includes practically all the hardware and software (except power supply) needed to start using the PLC.
1)
T28H-Relay PLC x 1 |
Download T28H-Relay Installation Guide (157K) - "inst-t28.zip"
Download H-series PLCs User Manual (109K) - "userguid.zip"
| Some of the above files are in a compressed ZIP format. The WinZip extraction utility can be downloaded from the link shown on the left. |
![]()
|
|